hwVplsPwSignal
HUAWEI-DSLAM-VPLS-MIB ·
.1.3.6.1.4.1.2011.5.115.1.1.1.2
Object
column
r/w
Enumeration
This object indicates the signal type. If the signal type is LDP, VSI-ID must be designated. After the signal type is configured, the configuration cannot be modified. Options: 1. unknown(0) -indicates signal type is not configured 2. ldp(1) -indicates signal type is LDP Default: unknown(0)
Context
- MIB
- HUAWEI-DSLAM-VPLS-MIB
- OID
.1.3.6.1.4.1.2011.5.115.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVplsEntry
- Table
- hwVplsTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | unknown |
1 | ldp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVplsVsiName This object indicates the VSI's name.
VSI name is a string of 1-15 characters.
There are all together 63 valid characters for the name.
These characters i… | column | OctetString | .1.3.6.1.4.1.2011.5.115.1.1.1.1 |
| hwVplsIgnoreAcState This object indicates the enable sign of the ignorer of AC state.
Options:
1. enable(1) -indicates that the ignore AC state function is enabled
2. disable(2) -indicates that the… | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.10 |
| hwVplsFlowLabel Indicates the stream label classification rule in the transmit direction.
Options:
1. sip(0) -Sets the stream label classification rule based on the source IP address
2. dip(1) … | column | Bits | .1.3.6.1.4.1.2011.5.115.1.1.1.11 |
| hwVplsFlowLabelCapabilities Indicates the VSI's flow label capability.
Options:
1. receive(0) -indicates the flow label capability in the receive direction is enabled
2. transmit(1) -indicates the flow lab… | column | Bits | .1.3.6.1.4.1.2011.5.115.1.1.1.12 |
| hwVplsControlWord Defines if the control word will be sent with each packet
by the local node. Some PW types mandate the use of a
control word, and in such cases, the value configured for
this obj… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2011.5.115.1.1.1.13 |
| hwVplsMacLimitAction This object indicates the processing mode when the MAC learning table is full.
Options:
1. discard(1) -indicates that the MAC limit action is discard
2. forward(… | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.14 |
| hwVplsMacLimitAlarm This object indicates whether send trap when the MAC learning table is full.
Options:
1. enable(1) -indicates that the mac limit alarm function is enabled
2. di… | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.15 |
| hwVplsMaxMacCount This object indicates how many MAC address can be learned in the VSI.
0 indicates disable MAC learning. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.16 |
| hwVplsTrafficSuppressUnicastUp Indicates the upstream unknown unicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and cor… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.17 |
| hwVplsTrafficSuppressUnicastDown Indicates the downstream unknown unicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and c… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.18 |
| hwVplsTrafficSuppressMulticastUp Indicates the upstream unknown multicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and c… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.19 |
| hwVplsTrafficSuppressMulticastDown Indicates the downstream unknown multicast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.20 |
| hwVplsTrafficSuppressBroadcastUp Indicates the upstream broadcast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and correspon… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.21 |
| hwVplsTrafficSuppressBroadcastDown Indicates the downstream broadcast traffic suppression of VSI.
13 indicates full-suppression of traffic, and 0 indicates no traffic suppression.
The suppression levels and corresp… | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.22 |
| hwVplsPriMappingProfileName QoS priority mapping profile name for VSI, a string of 1-32 characters.
There are all together 92 valid characters for the name.
These characters include the following:
uppercase … | column | OctetString | .1.3.6.1.4.1.2011.5.115.1.1.1.23 |
| hwVplsStatisticReset Clear the traffic statistics of all PW and AC for this VSI.
Options:
1. reset(1) -clear the traffic statistics of all PW and AC for this VSI | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.24 |
| hwVplsRowStatus For creating and modifying this row. None of the
read-create objects in the conceptual rows may be changed
when this object is in the active(1) state.
Options:
1. active(1) … | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.115.1.1.1.25 |
| hwVplsTnlPolicy Used to configure the tunnel policy used by the VSI. | column | OctetString | .1.3.6.1.4.1.2011.5.115.1.1.1.26 |
| hwVplsVsiID This object indicates the VSI ID.
The default value is 0, it means VSI ID is not configured.
After the VSI ID is configured, the configuration cannot be modified. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.3 |
| hwVplsVsiEncapType This object indicates the VSI's encapsulation type.
Options:
1. tagged(4) -indicates VSI's encapsulation type is tagged
2. raw(5) -indicates VSI's encapsulation type is… | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.4 |
| hwVplsAdminStatus VSI's admin status.
Options:
1. up(1) -indicates VSI's status up
2. down(2) -indicates VSI's status down | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.5 |
| hwVplsVsiState This object indicates the VSI's run state.
Options:
1. up(1) -indicates VSI's state is up
2. down(2) -indicates VSI's state is down
3. admindown(3) -indicates VSI i… | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.6 |
| hwVplsDescription This object indicates the description information. | column | OctetString | .1.3.6.1.4.1.2011.5.115.1.1.1.7 |
| hwVplsMtu This object indicates the VPLS's MTU. | column | Unsigned32 | .1.3.6.1.4.1.2011.5.115.1.1.1.8 |
| hwVplsAcIsolateFlag This object indicates whether the AC and Spoke-PW in the VSI is isolated
Options:
1. enable(1) -indicates the AC and Spoke-PW in the VSI is isolated
2. disable(2) -indicates th… | column | Enumeration | .1.3.6.1.4.1.2011.5.115.1.1.1.9 |