HPR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
54

hprAnrRoutingTable

table
.1.3.6.1.2.1.34.6.1.2.4 · 1 row entry · 6 columns
Open in standard view 
The ANR Routing table provides a means of correlating an
incoming ANR label (i.e., one assigned by this node) with the
TG over which a packet containing the label will be forwarded.
When the ANR label identifies a local NCE, the hprAnrOutTgDest
and hprAnrOutTgNum objects have no meaning.  The table also
contains an object to count the number of packets received
with a given ANR label.
hprAnrRoutingEntry entry .1.3.6.1.2.1.34.6.1.2.4.1
The ANR label is used to index this table.
Indexes
hprAnrLabel
Column Syntax OID
hprAnrLabel
The first ANR label in an incoming packet.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.2.1.34.6.1.2.4.1.1
hprAnrType
An object indicating whether an ANR label assigned by this
node identifies a local NCE or a TG on which outgoing packets
are forwarded.

nce(1) - the ANR label identifies a local NCE. In this
…
Enumeration
Enumerated Values:
1nce
2tg
 .1.3.6.1.2.1.34.6.1.2.4.1.2
hprAnrOutTgDest
Destination node for the TG over which packets with this ANR
label are forwarded. This is the fully qualified name of an
APPN network node or end node, formatted according to the
SnaControlPointName textual convention.…
OctetString
Constraints:
range: 3-17
range: 0-0
 .1.3.6.1.2.1.34.6.1.2.4.1.3
hprAnrOutTgNum
Number of the TG over which packets with this ANR label are
forwarded. If the ANR label identifies a local NCE, then this
object returns the value 0, since 0 is not a valid TG number
for a TG that supports HPR.
…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.2.1.34.6.1.2.4.1.4
hprAnrPacketsReceived
The count of packets received with this ANR label as their
first label.

A Management Station can detect discontinuities in this
counter by monitoring the hprAnrCounterDisconTime object in
the same row.
ANR packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.2.4.1.5
hprAnrCounterDisconTime
The value of the sysUpTime object when the
hprAnrPacketsReceived counter for this ANR label last
experienced a discontinuity. This will be the more recent of
two times: the time at which the ANR label was associated w…
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.2.1.34.6.1.2.4.1.6

hprNceTable

table
.1.3.6.1.2.1.34.6.1.3.1 · 1 row entry · 4 columns
Open in standard view 
The Network Connection Endpoint (NCE) table.
hprNceEntry entry .1.3.6.1.2.1.34.6.1.3.1.1
The NCE ID is used to index this table.
Indexes
hprNceId
Column Syntax OID
hprNceId
The Network Connection Endpoint (NCE) ID. NCEs identify
Control Points (Cp), Logical Units (Lu), HPR Boundary
Functions (Bf) and Route Setup (Rs) Functions. A value for
this object can be retrieved from any of the fol…
OctetString
Constraints:
range: 1-8
 .1.3.6.1.2.1.34.6.1.3.1.1.1
hprNceType
A bit string identifying the function types provided by this
Network Connection Endpoint (NCE).
HprNceTypes
Textual Convention: HprNceTypes Bits
Type Values:
0controlPoint
1logicalUnit
2boundaryFunction
3routeSetup
 .1.3.6.1.2.1.34.6.1.3.1.1.2
hprNceDefault
A bit string identifying the function types for which this
Network Connection Endpoint (NCE) is the default NCE. While
default NCEs are not explicitly defined in the architecture,
some implementations provide them; for…
HprNceTypes
Textual Convention: HprNceTypes Bits
Type Values:
0controlPoint
1logicalUnit
2boundaryFunction
3routeSetup
 .1.3.6.1.2.1.34.6.1.3.1.1.3
hprNceInstanceId
The NCE instance identifier (NCEII) identifying the current
instance of this NCE. An NCEII is used to denote different
instances (IPLs) of an NCE component. Each time an NCE is
activated (IPL'd), it acquires a differe…
OctetString
Constraints:
range: 4-4
 .1.3.6.1.2.1.34.6.1.3.1.1.4

hprRtpTable

table
.1.3.6.1.2.1.34.6.1.4.2 · 1 row entry · 32 columns
Open in standard view 
The RTP Connection table
hprRtpEntry entry .1.3.6.1.2.1.34.6.1.4.2.1
The local NCE ID and local TCID are used to index this
table.
Indexes
hprRtpLocNceId hprRtpLocTcid
Column Syntax OID
hprRtpLocNceId
The local Network Connection Endpoint (NCE) ID of this RTP
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
and Route Setup (RS) components. A value for this object can
be retrieved from any of the follow…
OctetString
Constraints:
range: 1-8
 .1.3.6.1.2.1.34.6.1.4.2.1.1
hprRtpLocTcid
The local TCID of this RTP connection. A value for this
object can be retrieved from either the appnIsInRtpTcid object
or the appnIsRtpTcid object the APPN MIB; in each case this
value identifies a row in this table co…
OctetString
Constraints:
range: 8-8
 .1.3.6.1.2.1.34.6.1.4.2.1.2
hprRtpRemCpName
Administratively assigned network name for the remote node of
this RTP connection.
APPN-MIBSnaControlPointName
Textual Convention: APPN-MIBSnaControlPointName OctetString
Type Constraints:
range: 3..17
 .1.3.6.1.2.1.34.6.1.4.2.1.3
hprRtpRemNceId
The remote Network Connection Endpoint (NCE) of this RTP
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
and Route Setup (RS) components.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.2.1.34.6.1.4.2.1.4
hprRtpRemTcid
The remote TCID of this RTP connection.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.2.1.34.6.1.4.2.1.5
hprRtpPathSwitchTrigger
Object by which a Management Station can trigger an operator-
requested path switch, by setting the value to
switchPathNow(2). Setting this object to switchPathNow(2)
triggers a path switch even if its previous value w…
Enumerationr/w
Enumerated Values:
1ready
2switchPathNow
 .1.3.6.1.2.1.34.6.1.4.2.1.6
hprRtpRscv
The forward Route Selection Control Vector for this RTP
connection. The format of this vector is described in SNA
Formats.

The value returned in this object during a path switch is
implementation-depende…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.2.1.34.6.1.4.2.1.7
hprRtpTopic
The topic for this RTP connection. This is used to indicate
the Class of Service.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.2.1.34.6.1.4.2.1.8
hprRtpState
The state of the RTP connection, from the perspective of the
local RTP protocol machine:

rtpListening - connection open; waiting for other end
to call in
rtpCalling …
Enumeration
Enumerated Values:
1rtpListening
2rtpCalling
3rtpConnected
4rtpPathSwitching
5rtpDisconnecting
99other
 .1.3.6.1.2.1.34.6.1.4.2.1.9
hprRtpUpTime
The length of time the RTP connection has been up, measured
in 1/100ths of a second.
1/100ths of a secondSNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.10
hprRtpLivenessTimer
The value of the liveness (ALIVE) timer of this RTP
connection, in units of 1/100th of a second. When this timer
expires and no packet has arrived from the partner since it
was last set, packets with Status Request ind…
1/100ths of a secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.11
hprRtpShortReqTimer
The value of the RTP SHORT_REQ timer, in units of 1/100 of a
second. This timer represents the maximum time that a sender
waits for a reply from a receiver.
1/100ths of a secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.12
hprRtpPathSwTimer
The length of time that RTP should attempt a path switch
for a connection, in units of 1/100th of a second.
1/100ths of a secondSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.13
hprRtpLivenessTimeouts
The count of liveness timeouts for this RTP connection.
liveness timeoutsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.14
hprRtpShortReqTimeouts
The count of short request timeouts for this RTP connection.
short request timeoutsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.15
hprRtpMaxSendRate
The high-water mark for this RTP connection's send rate, in
units of bytes per second. This is the high-water mark for
the entire life of the connection, not just the high-water
mark for the connection's current path.
…
bytes per secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.16
hprRtpMinSendRate
The low-water mark for this RTP connection's send rate, in
units of bytes per second. This is the low-water mark for the
entire life of the connection, not just the low-water mark for
the connection's current path.
…
bytes per secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.17
hprRtpCurSendRate
The current send rate for this RTP connection, in units of
bytes per second.

For more details on this and other parameters related to HPR,
see the High Performance Routing Architecture Reference.
bytes per secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.18
hprRtpSmRdTripDelay
The smoothed round trip delay for this RTP connection, in
units of 1/1000th of a second (ms).

For more details on this and other parameters related to HPR,
see the High Performance Routing Architecture Re…
1/1000ths of a secondSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.2.1.34.6.1.4.2.1.19
hprRtpSendPackets
The count of packets successfully sent on this RTP
connection.
RTP packetsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.20
hprRtpRecvPackets
The count of packets received on this RTP connection. The
counter is incremented only once if duplicate copies of a
packet are received.
RTP packetsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.21
hprRtpSendBytes
The count of bytes sent on this RTP connection. Both RTP
Transport Header (THDR) bytes and data bytes are included in
this count.
bytesHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.22
hprRtpRecvBytes
The count of bytes received on this RTP connection. Both RTP
Transport Header (THDR) bytes and data bytes are included in
this count.
bytesHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.23
hprRtpRetrPackets
The count of packets retransmitted on this RTP connection.
RTP packetsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.24
hprRtpPacketsDiscarded
The count of packets received on this RTP connection and then
discarded. A packet may be discarded because it is determined
to be a duplicate, or for other reasons.
RTP packetsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.25
hprRtpDetectGaps
The count of gaps detected on this RTP connection.
gapsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.26
hprRtpRateReqSends
The count of Rate Requests sent on this RTP connection.
rate requestsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.27
hprRtpOkErrPathSws
The count of successful path switch attempts for this RTP

connection due to errors.
path switch attemptsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.28
hprRtpBadErrPathSws
The count of unsuccessful path switches for this RTP
connection due to errors.
path switch attemptsHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.29
hprRtpOkOpPathSws
The count of successful path switches for this RTP connection
due to operator requests.
path switchesHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.30
hprRtpBadOpPathSws
The count of unsuccessful path switches for this RTP
connection due to operator requests. This counter is not
incremented by an implementation that does not support
operator-requested path switches, even if a Managemen…
path switchesHprRtpCounter
Textual Convention: HprRtpCounter Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.31
hprRtpCounterDisconTime
The value of the sysUpTime object when the counters for this
RTP connection last experienced a discontinuity. This will be

the more recent of two times: the time at which the
connection was established …
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.2.1.34.6.1.4.2.1.32

hprRtpStatusTable

table
.1.3.6.1.2.1.34.6.1.4.3 · 1 row entry · 12 columns
Open in standard view 
RTP Connection Status Table:  This table contains historical
information on RTP connections.  An entry is created in this
table when a path switch is completed, either successfully or
unsuccessfully.
hprRtpStatusEntry entry .1.3.6.1.2.1.34.6.1.4.3.1
This table is indexed by local NCE ID, local TCID, and an
integer hprRtpStatusIndex. Thus the primary grouping of table
rows is by RTP connection, with the multiple entries for a
given RTP connection ordered by time.
Indexes
hprRtpStatusLocNceId hprRtpStatusLocTcid hprRtpStatusIndex
Column Syntax OID
hprRtpStatusLocNceId
The local Network Connection Endpoint (NCE) of this RTP
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
and Route Setup (RS) components.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.2.1.34.6.1.4.3.1.1
hprRtpStatusLocTcid
The local TCID of this RTP connection.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.2.1.34.6.1.4.3.1.2
hprRtpStatusIndex
Table index. This value begins at one and is incremented
when a new entry is added to the table. It is an
implementation choice whether to run a single counter for

all entries in the table, or to run a …
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.2.1.34.6.1.4.3.1.3
hprRtpStatusStartTime
The time when the path switch began.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.2.1.34.6.1.4.3.1.4
hprRtpStatusEndTime
The time when the path switch was ended, either successfully
or unsuccessfully.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.2.1.34.6.1.4.3.1.5
hprRtpStatusRemCpName
Administratively assigned network name for the remote node of
this RTP connection.
APPN-MIBSnaControlPointName
Textual Convention: APPN-MIBSnaControlPointName OctetString
Type Constraints:
range: 3..17
 .1.3.6.1.2.1.34.6.1.4.3.1.6
hprRtpStatusRemNceId
The remote Network Connection Endpoint (NCE) of this RTP
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
and Route Setup (RS) components.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.2.1.34.6.1.4.3.1.7
hprRtpStatusRemTcid
The remote TCID of this RTP connection.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.2.1.34.6.1.4.3.1.8
hprRtpStatusNewRscv
The new Route Selection Control Vector for this RTP
connection. A zero-length string indicates that no value is
available, perhaps because the implementation does not save
RSCVs.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.2.1.34.6.1.4.3.1.9
hprRtpStatusOldRscv
The old Route Selection Control Vector for this RTP
connection. A zero-length string indicates that no value is
available, perhaps because the implementation does not save
RSCVs.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.2.1.34.6.1.4.3.1.10
hprRtpStatusCause
The reason for the path switch:

other(1) - Reason other than those listed below,
rtpConnFail(2) - RTP connection failure detected,
locLinkFail(3) - Local link failure,
remLinkFail(4) - Remote link f…
Enumeration
Enumerated Values:
1other
2rtpConnFail
3locLinkFail
4remLinkFail
5operRequest
 .1.3.6.1.2.1.34.6.1.4.3.1.11
hprRtpStatusLastAttemptResult
The result of the last completed path switch attempt. If the
path switch is aborted in the middle of a path switch attempt
because the path switch timer expires, the result of the
previous path switch attempt is report…
Enumeration
Enumerated Values:
1successful
2initiatorMoving
3directorySearchFailed
4rscvCalculationFailed
5negativeRouteSetupReply
6backoutRouteSetupReply
7timeoutDuringFirstAttempt
8otherUnsuccessful
 .1.3.6.1.2.1.34.6.1.4.3.1.12