hprRtpSmRdTripDelay
HPR-MIB ·
.1.3.6.1.2.1.34.6.1.4.2.1.19
Object
The smoothed round trip delay for this RTP connection, in
units of 1/1000th of a second (ms).
For more details on this and other parameters related to HPR,
see the High Performance Routing Architecture Reference.
Context
- MIB
- HPR-MIB
- OID
.1.3.6.1.2.1.34.6.1.4.2.1.19- Type
- column
- Access
- readonly
- Status
- current
- Units
- 1/1000ths of a second
- Parent
- hprRtpEntry
- Table
- hprRtpTable
- Siblings
- 31
Syntax
1/1000ths of a second SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hprRtpLocNceId The local Network Connection Endpoint (NCE) ID of this RTP
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
and Route Setup (RS) components. A value for this object… | column | OctetString | .1.3.6.1.2.1.34.6.1.4.2.1.1 |
| hprRtpUpTime The length of time the RTP connection has been up, measured
in 1/100ths of a second. | column | 1/100ths of a second SNMPv2-SMITimeTicks | .1.3.6.1.2.1.34.6.1.4.2.1.10 |
| hprRtpLivenessTimer The value of the liveness (ALIVE) timer of this RTP
connection, in units of 1/100th of a second. When this timer
expires and no packet has arrived from the partner since it
was l… | column | 1/100ths of a second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.34.6.1.4.2.1.11 |
| hprRtpShortReqTimer The value of the RTP SHORT_REQ timer, in units of 1/100 of a
second. This timer represents the maximum time that a sender
waits for a reply from a receiver. | column | 1/100ths of a second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.34.6.1.4.2.1.12 |
| hprRtpPathSwTimer The length of time that RTP should attempt a path switch
for a connection, in units of 1/100th of a second. | column | 1/100ths of a second SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.34.6.1.4.2.1.13 |
| hprRtpLivenessTimeouts The count of liveness timeouts for this RTP connection. | column | liveness timeouts HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.14 |
| hprRtpShortReqTimeouts The count of short request timeouts for this RTP connection. | column | short request timeouts HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.15 |
| hprRtpMaxSendRate The high-water mark for this RTP connection's send rate, in
units of bytes per second. This is the high-water mark for
the entire life of the connection, not just the high-water
… | column | bytes per second SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.6.1.4.2.1.16 |
| hprRtpMinSendRate The low-water mark for this RTP connection's send rate, in
units of bytes per second. This is the low-water mark for the
entire life of the connection, not just the low-water mar… | column | bytes per second SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.6.1.4.2.1.17 |
| hprRtpCurSendRate The current send rate for this RTP connection, in units of
bytes per second.
For more details on this and other parameters related to HPR,
see the High Performance … | column | bytes per second SNMPv2-SMIGauge32 | .1.3.6.1.2.1.34.6.1.4.2.1.18 |
| hprRtpLocTcid The local TCID of this RTP connection. A value for this
object can be retrieved from either the appnIsInRtpTcid object
or the appnIsRtpTcid object the APPN MIB; in each case this… | column | OctetString | .1.3.6.1.2.1.34.6.1.4.2.1.2 |
| hprRtpSendPackets The count of packets successfully sent on this RTP
connection. | column | RTP packets HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.20 |
| hprRtpRecvPackets The count of packets received on this RTP connection. The
counter is incremented only once if duplicate copies of a
packet are received. | column | RTP packets HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.21 |
| hprRtpSendBytes The count of bytes sent on this RTP connection. Both RTP
Transport Header (THDR) bytes and data bytes are included in
this count. | column | bytes HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.22 |
| hprRtpRecvBytes The count of bytes received on this RTP connection. Both RTP
Transport Header (THDR) bytes and data bytes are included in
this count. | column | bytes HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.23 |
| hprRtpRetrPackets The count of packets retransmitted on this RTP connection. | column | RTP packets HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.24 |
| hprRtpPacketsDiscarded The count of packets received on this RTP connection and then
discarded. A packet may be discarded because it is determined
to be a duplicate, or for other reasons. | column | RTP packets HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.25 |
| hprRtpDetectGaps The count of gaps detected on this RTP connection. | column | gaps HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.26 |
| hprRtpRateReqSends The count of Rate Requests sent on this RTP connection. | column | rate requests HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.27 |
| hprRtpOkErrPathSws The count of successful path switch attempts for this RTP
connection due to errors. | column | path switch attempts HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.28 |
| hprRtpBadErrPathSws The count of unsuccessful path switches for this RTP
connection due to errors. | column | path switch attempts HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.29 |
| hprRtpRemCpName Administratively assigned network name for the remote node of
this RTP connection. | column | APPN-MIBSnaControlPointName | .1.3.6.1.2.1.34.6.1.4.2.1.3 |
| hprRtpOkOpPathSws The count of successful path switches for this RTP connection
due to operator requests. | column | path switches HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.30 |
| hprRtpBadOpPathSws The count of unsuccessful path switches for this RTP
connection due to operator requests. This counter is not
incremented by an implementation that does not support
operator-requ… | column | path switches HprRtpCounter | .1.3.6.1.2.1.34.6.1.4.2.1.31 |
| hprRtpCounterDisconTime The value of the sysUpTime object when the counters for this
RTP connection last experienced a discontinuity. This will be
the more recent of two times: the time … | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.34.6.1.4.2.1.32 |
| hprRtpRemNceId The remote Network Connection Endpoint (NCE) of this RTP
connection. NCEs identify CPs, LUs, Boundary Functions (BFs),
and Route Setup (RS) components. | column | OctetString | .1.3.6.1.2.1.34.6.1.4.2.1.4 |
| hprRtpRemTcid The remote TCID of this RTP connection. | column | OctetString | .1.3.6.1.2.1.34.6.1.4.2.1.5 |
| hprRtpPathSwitchTrigger Object by which a Management Station can trigger an operator-
requested path switch, by setting the value to
switchPathNow(2). Setting this object to switchPathNow(2)
triggers a … | column | Enumeration | .1.3.6.1.2.1.34.6.1.4.2.1.6 |
| hprRtpRscv The forward Route Selection Control Vector for this RTP
connection. The format of this vector is described in SNA
Formats.
The value returned in this object during… | column | OctetString | .1.3.6.1.2.1.34.6.1.4.2.1.7 |
| hprRtpTopic The topic for this RTP connection. This is used to indicate
the Class of Service. | column | OctetString | .1.3.6.1.2.1.34.6.1.4.2.1.8 |
| hprRtpState The state of the RTP connection, from the perspective of the
local RTP protocol machine:
rtpListening - connection open; waiting for other end
… | column | Enumeration | .1.3.6.1.2.1.34.6.1.4.2.1.9 |