HPN-ICF-MPLSOAM-PS-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
14
hpnicfMplsPsTable
table.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1
·
1 row entry
·
14 columns
This table specifies per-protection-group MPLS PS capability and associated information.
An entry in this table is created by an LSR for every
protection group capable of supporting mpls ps.
protection group capable of supporting mpls ps.
Indexes
hpnicfMplsPsIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hpnicfMplsPsIndex
This is a unique index for an entry in the mplspsEntry.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.1 |
||||||||||||
|
hpnicfMplsPsGroupID
This is a unique group id for an entry in the mplspsEntry.
One protect-switch group is composed of one working static-lsp and one protection static-lsp. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.2 |
||||||||||||
|
hpnicfMplsPsWorkLspName
The name of the working static-lsp.
|
OctetStringr/w | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.3 |
||||||||||||
|
hpnicfMplsPsProtectLspName
The name of the protection static-lsp.
|
OctetStringr/w | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.4 |
||||||||||||
|
hpnicfMplsPsRevertiveMode
Revertive mode is a protection switching mode where revertive
action (switch back to the working LSP) is taken after the working LSP is repaired. And switching does not occur in a non-revertive mode. 1: revertive; 2: no… |
Integer32r/w Constraints: range: 1-2 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.5 |
||||||||||||
|
hpnicfMplsPsWTR
Wait to Restore timer is only applicable for the revertive mode
and applies to a working LSP, it prevents reversion back to select the working LSP until the Wait to Restore timer has expired. The default value is 12 min… |
30sSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.6 |
||||||||||||
|
hpnicfMplsPsHoldOff
The time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm. Step is 100ms, maximum is 10s. |
100msSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.7 |
||||||||||||
|
hpnicfMplsPsSwitchCondition
The current switch condition of the protection group.
1: clear, this command clears all of the externally initiated switch commands listed below; 2: lockout of protection, fix the selector position on the working LSP, P… |
Integer32r/w Constraints: range: 1-9 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.8 |
||||||||||||
|
hpnicfMplsPsWorkLspDetectState
The state of working static-lsp state in one protection group,
whether it is in defect: 1: it is out of defect; 2: it enters defect. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.9 |
||||||||||||
|
hpnicfMplsPsWorkLspUpDownState
The state of working static-lsp state in one protection group,
whether it is up or down: 1: it is in up state; 2: it is in down state. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.10 |
||||||||||||
|
hpnicfMplsPsProtLspDetectState
The state of protection static-lsp state in one protection group,
whether it is in detection: 1: it is out of defect; 2: it enters defect. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.11 |
||||||||||||
|
hpnicfMplsPsProtLspUpDownState
The state of protection static-lsp state in one protection group,
whether it is up or down: 1: it is in up state; 2: it is in down state. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.12 |
||||||||||||
|
hpnicfMplsPsSwitchResult
Which tunnel is used to transfer the data stream.
1: working static-lsp; 2: protection static-lsp. |
Integer32 Constraints: range: 1-2 |
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.13 |
||||||||||||
|
hpnicfMplsPsRowStatus
This object is responsible for managing the creation,
deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hpnicfMplsPsGroupID, hpnicfMplsPsWorkLspName, … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.14 |