hpnicfMplsPsRevertiveMode
HPN-ICF-MPLSOAM-PS-MIB ·
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.5
Object
column
r/w
Integer32
Revertive mode is a protection switching mode where revertive action (switch back to the working LSP) is taken after the working LSP is repaired. And switching does not occur in a non-revertive mode. 1: revertive; 2: non-revertive;
Context
- MIB
- HPN-ICF-MPLSOAM-PS-MIB
- OID
.1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hpnicfMplsPsEntry
- Table
- hpnicfMplsPsTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hpnicfMplsPsIndex This is a unique index for an entry in the mplspsEntry. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.1 |
| hpnicfMplsPsWorkLspUpDownState The state of working static-lsp state in one protection group,
whether it is up or down:
1: it is in up state;
2: it is in down state. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.10 |
| hpnicfMplsPsProtLspDetectState The state of protection static-lsp state in one protection group,
whether it is in detection:
1: it is out of defect;
2: it enters defect. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.11 |
| hpnicfMplsPsProtLspUpDownState The state of protection static-lsp state in one protection group,
whether it is up or down:
1: it is in up state;
2: it is in down state. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.12 |
| hpnicfMplsPsSwitchResult Which tunnel is used to transfer the data stream.
1: working static-lsp;
2: protection static-lsp. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.13 |
| hpnicfMplsPsRowStatus This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, hpnicf… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.14 |
| hpnicfMplsPsGroupID This is a unique group id for an entry in the mplspsEntry.
One protect-switch group is composed of one working static-lsp
and one protection static-lsp. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.2 |
| hpnicfMplsPsWorkLspName The name of the working static-lsp. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.3 |
| hpnicfMplsPsProtectLspName The name of the protection static-lsp. | column | OctetString | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.4 |
| hpnicfMplsPsWTR Wait to Restore timer is only applicable for the revertive mode
and applies to a working LSP, it prevents reversion back to
select the working LSP until the Wait to Restore timer … | column | 30s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.6 |
| hpnicfMplsPsHoldOff The time between declaration of signal degrade or signal fail,
and the initialization of the protection switching algorithm.
Step is 100ms, maximum is 10s. | column | 100ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.7 |
| hpnicfMplsPsSwitchCondition The current switch condition of the protection group.
1: clear, this command clears all of the externally
initiated switch commands listed below;
2: lockout of protection, fix the… | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.8 |
| hpnicfMplsPsWorkLspDetectState The state of working static-lsp state in one protection group,
whether it is in defect:
1: it is out of defect;
2: it enters defect. | column | Integer32 | .1.3.6.1.4.1.11.2.14.11.15.2.80.2.1.1.9 |