HP-SN-POS-GROUP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
41

snPOSInfoTable

table mandatory
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1 · 1 row entry · 41 columns
Open in standard view 
A specific snPOSInfo group consists of a number of 
switch ports.
snPOSInfoEntry entry .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1
An entry in the snPOSInfo table indicates the
configuration on a specified port. A SNMP SET PDU
for a row of the snPOSInfoTable requires the entired
sequence of the MIB Objects in each
snPOSInfoEntry stored in one P…
Indexes
snPOSInfoPortNum
Column Syntax OID
snPOSInfoPortNum mandatory
The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only).
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.1
snPOSIfIndex mandatory
In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.2
snPOSDescr mandatory
A textual string containing the slot/port information
about the interface.
DisplayString
Textual Convention: DisplayString OctetString
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.3
snPOSName mandatory
Port Name string.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.4
snPOSInfoSpeed mandatory
The speed configuration for a port. The values are:
155000
622000
2488000
Enumerationr/w
Enumerated Values:
1s155000
2s622000
3other
4s2488000
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.5
snPOSInfoAdminStatus mandatory
The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II)
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.6
snPOSInfoLinkStatus mandatory
The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II)
Enumeration
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.7
snPOSInfoClock mandatory
Clock default internal
Enumerationr/w
Enumerated Values:
1internal
2line
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.8
snPOSInfoLoopBack mandatory
Loop back default none
Enumerationr/w
Enumerated Values:
1line
2internal
3none
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.9
snPOSInfoScrambleATM mandatory
ATM style scrambling default off
POSStatusr/w
Textual Convention: POSStatus Enumeration
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.10
snPOSInfoFraming mandatory
Framing default SONET
Enumerationr/w
Enumerated Values:
1sonet
2sdh
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.11
snPOSInfoCRC mandatory
CRC default 32 bit
Enumerationr/w
Enumerated Values:
1crc32bits
2crc16bits
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.12
snPOSInfoKeepAlive mandatory
Keep-alive default 10
Integer32r/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.13
snPOSInfoFlagC2 mandatory
C2 flag
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.14
snPOSInfoFlagJ0 mandatory
J0 flag
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.15
snPOSInfoFlagH1 mandatory
H1 flag
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.16
snPOSStatsInFrames mandatory
The total number of packets received on the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.17
snPOSStatsOutFrames mandatory
The total number of packets transmitted out of the interface.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.18
snPOSStatsAlignErrors mandatory
dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.

The count represented by an instance o…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.19
snPOSStatsFCSErrors mandatory
dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.

The count represented by an instance of this
obj…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.20
snPOSStatsFrameTooLongs mandatory
dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.

The count represented by an instance of this
object is incremented when the fr…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.21
snPOSStatsFrameTooShorts mandatory
A count of frames received on a particular
interface that below the minimum permitted
frame size.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.22
snPOSStatsInDiscard mandatory
The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.23
snPOSStatsOutDiscard mandatory
The number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.24
snPOSInOctets mandatory
The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet string is in big-endian byte order.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.25
snPOSOutOctets mandatory
The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The octet string is in big-endian byte order.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.26
snPOSStatsInBitsPerSec mandatory
The number of bits per second received on the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.27
snPOSStatsOutBitsPerSec mandatory
The number of bits per second transmitted out of the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.28
snPOSStatsInPktsPerSec mandatory
The number of packets per second received on the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.29
snPOSStatsOutPktsPerSec mandatory
The number of packets per second transmitted out of the interface
over a 5 minutes interval.
RFC1155-SMIGauge
Textual Convention: RFC1155-SMIGauge Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.30
snPOSStatsInUtilization mandatory
The input network utilization in hundredths of a percent
over a 5 minutes interval.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.31
snPOSStatsOutUtilization mandatory
The output network utilization in hundredths of a percent
over a 5 minutes interval.
Integer32
Constraints:
range: 0-10000
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.32
snPOSTagType mandatory
For tagged port, we could have multiple VLANs
per port.
Enumeration
Enumerated Values:
1tagged
2untagged
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.33
snPOSStatsB1 mandatory
Section error monitoring.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.34
snPOSStatsB2 mandatory
Line error monitoring.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.35
snPOSStatsB3 mandatory
Path error monitoring.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.36
snPOSStatsAIS mandatory
Alarm indication signal.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.37
snPOSStatsRDI mandatory
Remote defect indication.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.38
snPOSStatsLOP mandatory
Loss of pointer.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.39
snPOSStatsLOF mandatory
Loss of frame.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.40
snPOSStatsLOS mandatory
Loss of signal.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.41