snPOSStatsOutDiscard
HP-SN-POS-GROUP-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.24
Object
The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.
Context
- MIB
- HP-SN-POS-GROUP-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.24- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- snPOSInfoEntry
- Table
- snPOSInfoTable
- Siblings
- 40
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snPOSInfoPortNum mandatory The port index.
The bit 0 to bit 7: port number.
The bit 8 to bit 11: slot number (slot for chassis only). | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.1 |
| snPOSInfoScrambleATM mandatory ATM style scrambling default off | column | POSStatus | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.10 |
| snPOSInfoFraming mandatory Framing default SONET | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.11 |
| snPOSInfoCRC mandatory CRC default 32 bit | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.12 |
| snPOSInfoKeepAlive mandatory Keep-alive default 10 | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.13 |
| snPOSInfoFlagC2 mandatory C2 flag | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.14 |
| snPOSInfoFlagJ0 mandatory J0 flag | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.15 |
| snPOSInfoFlagH1 mandatory H1 flag | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.16 |
| snPOSStatsInFrames mandatory The total number of packets received on the interface. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.17 |
| snPOSStatsOutFrames mandatory The total number of packets transmitted out of the interface. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.18 |
| snPOSStatsAlignErrors mandatory dot3StatsAlignmentErrors : A count of frames
received on a particular interface that are
not an integral number of octets in length
and do not pass the FCS check.
… | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.19 |
| snPOSIfIndex mandatory In order to identify a particular interface, this
object shall identify the instance of the ifIndex
object, defined in RFC 1213 and RFC 1573. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.2 |
| snPOSStatsFCSErrors mandatory dot3StatsFCSErrors : A count of frames received
on a particular interface that are an integral
number of octets in length but do not pass the
FCS check.
The coun… | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.20 |
| snPOSStatsFrameTooLongs mandatory dot3StatsFrameTooLongs : A count of frames
received on a particular interface that
exceed the maximum permitted frame size.
The count represented by an instance o… | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.21 |
| snPOSStatsFrameTooShorts mandatory A count of frames received on a particular
interface that below the minimum permitted
frame size. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.22 |
| snPOSStatsInDiscard mandatory The number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possibl… | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.23 |
| snPOSInOctets mandatory The total number of octets received on the interface,
including framing characters. This object is a 64-bit
counter of the ifInOctets object, defined in RFC 1213.
The octet stri… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.25 |
| snPOSOutOctets mandatory The total number of octets transmitted out of the interface,
including framing characters. This object is a 64-bit
counter of the ifOutOctets object, defined in RFC 1213.
The oc… | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.26 |
| snPOSStatsInBitsPerSec mandatory The number of bits per second received on the interface
over a 5 minutes interval. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.27 |
| snPOSStatsOutBitsPerSec mandatory The number of bits per second transmitted out of the interface
over a 5 minutes interval. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.28 |
| snPOSStatsInPktsPerSec mandatory The number of packets per second received on the interface
over a 5 minutes interval. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.29 |
| snPOSDescr mandatory A textual string containing the slot/port information
about the interface. | column | DisplayString | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.3 |
| snPOSStatsOutPktsPerSec mandatory The number of packets per second transmitted out of the interface
over a 5 minutes interval. | column | RFC1155-SMIGauge | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.30 |
| snPOSStatsInUtilization mandatory The input network utilization in hundredths of a percent
over a 5 minutes interval. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.31 |
| snPOSStatsOutUtilization mandatory The output network utilization in hundredths of a percent
over a 5 minutes interval. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.32 |
| snPOSTagType mandatory For tagged port, we could have multiple VLANs
per port. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.33 |
| snPOSStatsB1 mandatory Section error monitoring. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.34 |
| snPOSStatsB2 mandatory Line error monitoring. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.35 |
| snPOSStatsB3 mandatory Path error monitoring. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.36 |
| snPOSStatsAIS mandatory Alarm indication signal. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.37 |
| snPOSStatsRDI mandatory Remote defect indication. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.38 |
| snPOSStatsLOP mandatory Loss of pointer. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.39 |
| snPOSName mandatory Port Name string. | column | OctetString | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.4 |
| snPOSStatsLOF mandatory Loss of frame. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.40 |
| snPOSStatsLOS mandatory Loss of signal. | column | RFC1155-SMICounter | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.41 |
| snPOSInfoSpeed mandatory The speed configuration for a port. The values are:
155000
622000
2488000 | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.5 |
| snPOSInfoAdminStatus mandatory The desired state of all ports. The
testing(3) state indicates that no operational
packets can be passed.
(same as ifAdminStatus in MIB-II) | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.6 |
| snPOSInfoLinkStatus mandatory The current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
(same as ifOperStatus in MIB-II) | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.7 |
| snPOSInfoClock mandatory Clock default internal | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.8 |
| snPOSInfoLoopBack mandatory Loop back default none | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.12.2.14.1.1.1.9 |