HP-ICF-SMART-LINK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
33
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3 · 1 row entry · 15 columns
This table allows user to configure Smart link
groups.
hpicfSmartLinkGroupEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1
An entry containing information about a Smart link
group.
Indexes
hpicfSmartLinkGroupIndex
Column Syntax OID
hpicfSmartLinkGroupIndex
The Object which uniquely identifies the Smart
link group.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.1
hpicfSmartLinkGroupMasterPort
This object is used to configure master port of
this group. The value of 0 (zero) indicates that
master port is not configured for this group.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.2
hpicfSmartLinkGroupSlavePort
This object is used to configure slave port of
this group. The value of 0 (zero) indicates that
slave port is not configured for this group.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.3
hpicfSmartLinkGroupSendControlVlan
The object indicates the VLAN on which the flush
packets are sent for this group.
Q-BRIDGE-MIBVlanIndexr/w
Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.4
hpicfSmartLinkGroupPreemptionMode
The object specifies the preemption mechanism for
this group.
off(1) - No preemption happens from primary to
secondary.

role(2) - The primary always preempts to secondary after
the time specified in
hpicf…
Enumerationr/w
Enumerated Values:
1off
2role
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.5
hpicfSmartLinkGroupPreemptionDelay
The delay time, in seconds, until
standby preempts active on this group.
Integer32r/w
Constraints:
range: 0-300
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.6
hpicfSmartLinkGroupProtectedVlan1k
A string of octets containing one bit per
protected VLAN from VLAN IDs 1 to 1024. The first
octet corresponds to VLAN IDs 1 through 8, the
second octet to VLAN IDs 9 through 16, etc.
Within each octet, the most signif…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.7
hpicfSmartLinkGroupProtectedVlan2k
A string of octets containing one bit per
protected VLAN from VLAN IDs 1025 to 2048. The
first octet corresponds to VLAN IDs 1025 through
1032, the second octet to VLAN IDs 1033 through
1040, etc. Within each octet, t…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.8
hpicfSmartLinkGroupProtectedVlan3k
A string of octets containing one bit per
protected VLAN from VLAN IDs 2049 to 3072. The
first octet corresponds to VLAN IDs 2049 through
2056, the second octet to VLAN IDs 2057 through
2064, etc. Within each octet, th…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.9
hpicfSmartLinkGroupProtectedVlan4k
A string of octets containing one bit per
protected VLAN from VLAN IDs 3073 to 4094.
The first octet corresponds to VLAN IDs 3073
through 3080, the second octet to VLAN IDs 3081
through 3088, etc. Within each octet, th…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.10
hpicfSmartLinkGroupTrapControl
Setting this object to the value of true(1)
allows the system to send
hpicfSmartLinkPortRoleChangeNotification
trap whenever standby link takes over active link.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.11
hpicfSmartLinkGroupClearStats
Setting this object to the value of true(1) clears
the group statistics.
This object will always return false(2).
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.12
hpicfSmartLinkGroupRowStatus
Status of the row in hpicfSmartLinkGroupTable.
This object must be set to 'creatAndGo' to
create an entry and set to 'destroy' to delete an
entry. The columns can be modified only when
the RowStatus is 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.13
hpicfSmartLinkGroupPrimaryPort
This object is used to configure primary port of
this group. The value of 0 (zero) indicates that
primary port is not configured for this group.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.14
hpicfSmartLinkGroupSecondaryPort
This object is used to configure secondary port of
this group. The value of 0 (zero) indicates that
secondary port is not configured for this group.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.15
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4 · 1 row entry · 12 columns
This table contains information of Smart link
groups.
hpicfSmartLinkExtendedGroupEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1
An entry containing information about a Smart link
group.
Indexes
No indexes recorded
Column Syntax OID
hpicfSmartLinkGroupMasterPortState
The status of an interface participating in Smart
link operation.
uninitialized (1) - A value of 'uninitialized'
indicates that, the interface is not configured.
active(2) - A value of 'active' indicates that,
the …
Enumeration
Enumerated Values:
1uninitialized
2active
3standby
4down
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.1
hpicfSmartLinkGroupSlavePortState
The status of an interface participating in Smart
link operation.
uninitialized (1) - A value of ' uninitialized '
indicates that, the interface
is not configured.
active(2) - A v…
Enumeration
Enumerated Values:
1uninitialized
2active
3standby
4down
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.2
hpicfSmartLinkMasterFlushPktTx
Number of flush packets sent on master port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.3
hpicfSmartLinkMasterFlushPktLastUpdate
This MIB object indicates the time at which the
last flush packet was sent on master port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.4
hpicfSmartLinkSlaveFlushPktTx
Number of flush packets sent on slave port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.5
hpicfSmartLinkSlaveFlushPktLastUpdate
This MIB object indicates the time at which the
last flush packet was sent on slave port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.6
hpicfSmartLinkGroupPrimaryPortState
The status of an interface participating in Smart
link operation.
uninitialized (1) - A value of 'uninitialized'
indicates that, the interface is not configured.
active(2) - A value of 'active' indicates that,
the i…
Enumeration
Enumerated Values:
1uninitialized
2active
3standby
4down
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.7
hpicfSmartLinkGroupSecondaryPortState
The status of an interface participating in Smart
link operation.
uninitialized (1) - A value of ' uninitialized '
indicates that, the interface
is not configured.
active(2) - A v…
Enumeration
Enumerated Values:
1uninitialized
2active
3standby
4down
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.8
hpicfSmartLinkPrimaryFlushPktTx
Number of flush packets sent on primary port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.9
hpicfSmartLinkPrimaryFlushPktLastUpdate
This MIB object indicates the time at which the
last flush packet was sent on primary port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.10
hpicfSmartLinkSecondaryFlushPktTx
Number of flush packets sent on secondary port.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.11
hpicfSmartLinkSecondaryFlushPktLastUpdate
This MIB object indicates the time at which the
last flush packet was sent on secondary port.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.4.1.12
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5 · 1 row entry · 6 columns
This table allows user to configure Smart
link port attributes.
hpicfSmartLinkPortEntry entry .1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1
An entry, containing configuration information of
a Smart link port. An entry will be created when
receive control VLANs are configured for this
port.
Indexes
hpicfSmartLinkPortIndex
Column Syntax OID
hpicfSmartLinkPortIndex
The port which uniquely identifies a row in
this entry
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.1
hpicfSmartLinkRecvControlVlans1k
A string of octets containing one bit per
protected VLAN from VLAN IDs 1 to 1024. The first
octet corresponds to VLAN IDs 1 through 8, the
second octet to VLAN IDs 9 through 16, etc.
Within each octet, the most signifi…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.2
hpicfSmartLinkRecvControlVlans2k
A string of octets containing one bit per
protected VLAN from VLAN IDs 1025 to 2048. The
first octet corresponds to VLAN IDs 1025 through
1032, the second octet to VLAN IDs 1033 through
1040, etc. Within each octet, th…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.3
hpicfSmartLinkRecvControlVlans3k
A string of octets containing one bit per
protected VLAN from VLAN IDs 2049 to 3072. The
first octet corresponds to VLAN IDs 2049 through
2056, the second octet to VLAN IDs 2057 through
2064, etc. Within each octet, th…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.4
hpicfSmartLinkRecvControlVlans4k
A string of octets containing one bit per
protected VLAN from VLAN IDs 3073 to 4094. The
first octet corresponds to VLAN IDs 3073 through
3080, the second octet to VLAN IDs 3081 through
3088, etc. Within each octet, the…
OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.5
hpicfSmartLinkPortRowStatus
Status of the row in hpicfSmartLinkPortTable.
This object must be set to 'creatAndGo' to
create an entry and set to 'destroy' to delete an
entry. The columns can be modified only when the
rowstatus is 'active'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.5.1.6