hpicfSmartLinkGroupProtectedVlan2k

HP-ICF-SMART-LINK-MIB · .1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.8
MIB view Table view

Object

column r/w OctetString 
A string of octets containing one bit per
protected VLAN from VLAN IDs 1025 to 2048. The
first octet corresponds to VLAN IDs 1025 through 
1032, the second octet to VLAN IDs 1033 through 
1040, etc. Within each octet, the most significant
bit represents the lowest numbered VLAN ID, and the
least significant bit represents the highest
numbered VLAN ID.

Context

MIB
HP-ICF-SMART-LINK-MIB
OID
.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.8
Type
column
Access
readwrite
Status
current
Parent
hpicfSmartLinkGroupEntry
Table
hpicfSmartLinkGroupTable
Siblings
14

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-128

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hpicfSmartLinkGroupIndex
The Object which uniquely identifies the Smart link group.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.1
hpicfSmartLinkGroupProtectedVlan4k
A string of octets containing one bit per protected VLAN from VLAN IDs 3073 to 4094. The first octet corresponds to VLAN IDs 3073 through 3080, the second octet to VLAN IDs 3081 …
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.10
hpicfSmartLinkGroupTrapControl
Setting this object to the value of true(1) allows the system to send hpicfSmartLinkPortRoleChangeNotification trap whenever standby link takes over active link.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.11
hpicfSmartLinkGroupClearStats
Setting this object to the value of true(1) clears the group statistics. This object will always return false(2).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.12
hpicfSmartLinkGroupRowStatus
Status of the row in hpicfSmartLinkGroupTable. This object must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The columns can be modified o…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.13
hpicfSmartLinkGroupPrimaryPort
This object is used to configure primary port of this group. The value of 0 (zero) indicates that primary port is not configured for this group.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.14
hpicfSmartLinkGroupSecondaryPort
This object is used to configure secondary port of this group. The value of 0 (zero) indicates that secondary port is not configured for this group.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.15
hpicfSmartLinkGroupMasterPort
This object is used to configure master port of this group. The value of 0 (zero) indicates that master port is not configured for this group.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.2
hpicfSmartLinkGroupSlavePort
This object is used to configure slave port of this group. The value of 0 (zero) indicates that slave port is not configured for this group.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.3
hpicfSmartLinkGroupSendControlVlan
The object indicates the VLAN on which the flush packets are sent for this group.
columnQ-BRIDGE-MIBVlanIndex.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.4
hpicfSmartLinkGroupPreemptionMode
The object specifies the preemption mechanism for this group. off(1) - No preemption happens from primary to secondary. role(2) - The primary always preempts to sec…
columnEnumeration.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.5
hpicfSmartLinkGroupPreemptionDelay
The delay time, in seconds, until standby preempts active on this group.
columnInteger32.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.6
hpicfSmartLinkGroupProtectedVlan1k
A string of octets containing one bit per protected VLAN from VLAN IDs 1 to 1024. The first octet corresponds to VLAN IDs 1 through 8, the second octet to VLAN IDs 9 through 16, …
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.7
hpicfSmartLinkGroupProtectedVlan3k
A string of octets containing one bit per protected VLAN from VLAN IDs 2049 to 3072. The first octet corresponds to VLAN IDs 2049 through 2056, the second octet to VLAN IDs 2057 …
columnOctetString.1.3.6.1.4.1.11.2.14.11.5.1.96.1.3.1.9