HMTRACKING-SNMP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
22

hmTrackingTable

table
.1.3.6.1.4.1.248.14.15.1.1 · 1 row entry · 18 columns
Open in standard view 
This table contains variables to define
an entry in the Hirschmann Tracking database.
hmTrackingEntry entry .1.3.6.1.4.1.248.14.15.1.1.1
The entry of the hmTrackingTable.
Indexes
hmTrackId
Column Syntax OID
hmTrackId
The id of an object being tracked.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.14.15.1.1.1.1
hmTrackRowStatus
Defines the status of the Tracking database entry.
Set to createAndWait(5) to create a new row.
Set to destroy(6) to delete an entry.
Set to notInService(2) to change an entry.
Reads as active(1) if the tracked object e…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.14.15.1.1.1.2
hmTrackType
The kind of an object being tracked.
Enumerationr/w
Enumerated Values:
1undefined
2interface
3ping
4logical
 .1.3.6.1.4.1.248.14.15.1.1.1.3
hmTrackState
Shows if the tracked object is currently UP or DOWN.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.248.14.15.1.1.1.4
hmTrackNumberOfChanges
The number of state changes after an object being
tracked, entered its operational state.
If the current state was entered prior to the last
re-initialization of the local network management
subsystem, then this object …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.14.15.1.1.1.5
hmTrackTimeSinceLastChange
The time difference to the last state change of an object being
tracked (in hundredths of a second).
If the current state was entered prior to the last
re-initialization of the local network management
subsystem, then t…
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.14.15.1.1.1.6
hmTrackIfNumber
The number of the interface being tracked.
The number of the interface to send ping
packets. For ping objects the value 65535
is used to show that no valid interface
number has been set. It cannot be written.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.14.15.1.1.1.7
hmTrackIfLinkUpDelay
If a link-up recovers within this delay,
the tracked object is not considered as up.
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.14.15.1.1.1.8
hmTrackIfLinkDownDelay
If a link-down recovers within this delay,
the tracked object is not considered as down.
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.14.15.1.1.1.9
hmTrackPingIpAddress
The IP address of the router being monitored.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.14.15.1.1.1.10
hmTrackPingInterval
The number of seconds between the pings to the
target IP address.
secondsInteger32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.248.14.15.1.1.1.11
hmTrackPingMiss
This specifies the number of consecutive ping
misses until the tracked object is considered
to be down.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.248.14.15.1.1.1.12
hmTrackPingSuccess
This specifies the number of consecutive ping
successes until the tracked object is considered
to be up.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.248.14.15.1.1.1.13
hmTrackPingTimeout
This specifies the timeout in milliseconds for
a ping reply. After the timeout the ping reply
is considered as lost.
millisecondsInteger32r/w
Constraints:
range: 10-10000
 .1.3.6.1.4.1.248.14.15.1.1.1.14
hmTrackPingTTL
This specifies the time to live for a ping request
packet.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.248.14.15.1.1.1.15
hmTrackPingBestRouteIfNumber
This shows the number of the interface which
belongs to the best route. The interface number
is zero if the best route is not used to send
ping packets.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.14.15.1.1.1.16
hmTrackLogicalOperator
Defines the logical operation performed on the instances
Enumerationr/w
Enumerated Values:
1and
2or
 .1.3.6.1.4.1.248.14.15.1.1.1.17
hmTrackSendStateChangeTrap
Enables or disables the sending of a trap when hmTrackState changes
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.248.14.15.1.1.1.18

hmTrackingApplicationTable

table
.1.3.6.1.4.1.248.14.15.1.2 · 1 row entry · 2 columns
Open in standard view 
This table contains information about registered
applications, for each object being tracked.
hmTrackingApplicationEntry entry .1.3.6.1.4.1.248.14.15.1.2.1
The entry of the hmTrackingApplicationTable.
Indexes
hmTrackId hmTrackAppId
Column Syntax OID
hmTrackAppId
The id of an application which tracks an object.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.14.15.1.2.1.2
hmTrackAppName
The name of the registered application.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.248.14.15.1.2.1.3

hmTrackLogicalInstanceTable

table
.1.3.6.1.4.1.248.14.15.1.3 · 1 row entry · 2 columns
Open in standard view 
This table contains information the tracking
instances that are combined into a logical
tracking instance.
hmTrackLogicalInstanceEntry entry .1.3.6.1.4.1.248.14.15.1.3.1
The entry of the hmTrackLogicalInstanceTable.
Indexes
hmTrackId hmTrackLogicalInstanceId
Column Syntax OID
hmTrackLogicalInstanceId
The id of an object that is a member of the logical tracking object.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.14.15.1.3.1.2
hmTrackLogicInstRowStatus
Defines the status of the Logic Tracking member entry.
Set to createAndGo(4) to create a new row.
Set to destroy(6) to delete an entry.
Reads as active(1) if the row exists.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.14.15.1.3.1.3