hmTrackIfNumber
HMTRACKING-SNMP-MIB ·
.1.3.6.1.4.1.248.14.15.1.1.1.7
Object
The number of the interface being tracked. The number of the interface to send ping packets. For ping objects the value 65535 is used to show that no valid interface number has been set. It cannot be written.
Context
- MIB
- HMTRACKING-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.15.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hmTrackingEntry
- Table
- hmTrackingTable
- Siblings
- 17
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmTrackId The id of an object being tracked. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.15.1.1.1.1 |
| hmTrackPingIpAddress The IP address of the router being monitored. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.15.1.1.1.10 |
| hmTrackPingInterval The number of seconds between the pings to the
target IP address. | column | seconds Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.11 |
| hmTrackPingMiss This specifies the number of consecutive ping
misses until the tracked object is considered
to be down. | column | Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.12 |
| hmTrackPingSuccess This specifies the number of consecutive ping
successes until the tracked object is considered
to be up. | column | Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.13 |
| hmTrackPingTimeout This specifies the timeout in milliseconds for
a ping reply. After the timeout the ping reply
is considered as lost. | column | milliseconds Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.14 |
| hmTrackPingTTL This specifies the time to live for a ping request
packet. | column | Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.15 |
| hmTrackPingBestRouteIfNumber This shows the number of the interface which
belongs to the best route. The interface number
is zero if the best route is not used to send
ping packets. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.248.14.15.1.1.1.16 |
| hmTrackLogicalOperator Defines the logical operation performed on the instances | column | Enumeration | .1.3.6.1.4.1.248.14.15.1.1.1.17 |
| hmTrackSendStateChangeTrap Enables or disables the sending of a trap when hmTrackState changes | column | Enumeration | .1.3.6.1.4.1.248.14.15.1.1.1.18 |
| hmTrackRowStatus Defines the status of the Tracking database entry.
Set to createAndWait(5) to create a new row.
Set to destroy(6) to delete an entry.
Set to notInService(2) to change an entry.
Re… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.14.15.1.1.1.2 |
| hmTrackType The kind of an object being tracked. | column | Enumeration | .1.3.6.1.4.1.248.14.15.1.1.1.3 |
| hmTrackState Shows if the tracked object is currently UP or DOWN. | column | Enumeration | .1.3.6.1.4.1.248.14.15.1.1.1.4 |
| hmTrackNumberOfChanges The number of state changes after an object being
tracked, entered its operational state.
If the current state was entered prior to the last
re-initialization of the local network… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.15.1.1.1.5 |
| hmTrackTimeSinceLastChange The time difference to the last state change of an object being
tracked (in hundredths of a second).
If the current state was entered prior to the last
re-initialization of the lo… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.248.14.15.1.1.1.6 |
| hmTrackIfLinkUpDelay If a link-up recovers within this delay,
the tracked object is not considered as up. | column | seconds Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.8 |
| hmTrackIfLinkDownDelay If a link-down recovers within this delay,
the tracked object is not considered as down. | column | seconds Integer32 | .1.3.6.1.4.1.248.14.15.1.1.1.9 |