HMIT-SW-PORTMGR-DDMI-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
58

portDDMITable

table
.1.3.6.1.4.1.248.100.1.6.3.1.13.6 · 1 row entry · 58 columns
Open in standard view 
The information of the DDMI on the switch.
portDDMIEntry entry .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1
The information of the DDMI on the switch.
Indexes
portDDMIIFindex
Column Syntax OID
portDDMIIFindex
The index of the port.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.1
portDDMIDeviceId
The physical device described by
the two-wire interface information.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.2
portDDMIConnector
The external optical or electrical cable connector
provided as the media interface.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.3
portDDMIEncoding
The serial encoding mechanisms that are supported
by the particular transceiver.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.4
portDDMITransmitLen
The link length that is supported by the transceiver while
operating in compliance with the applicable standards using
single mode fiber, 62.5 micron multimode OM1[200MHz*km at 850nm,
500MHz*km at 1310nm] fiber, 50 micr…
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.6
portDDMIVendorOUI
The vendor organizationally unique identifier(OUI)
of the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.7
portDDMIVendorName
The vendor name of the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.8
portDDMIPartName
The vendor part number(vendor PN) of the transceiver. A value
of all zero indicates that the vendor PN is unspecified.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.9
portDDMIRevisionNum
The vendor revision number(vendor rev) of the transceiver.
A value of all zero indicates that the vendor rev is unspecified.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.10
portDDMILaserWaveLen
The laser wavelength of the transceiver.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.11
portDDMISerialNum
The vendor serial number(vendor SN) of the transceiver.
A value of all zero indicates that the vendor SN is unspecified.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.12
portDDMIClass
No longer in use.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.13
portDDMIProductDate
The produce date of the transceiver.
OctetString
Constraints:
range: 0-8
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.14
portDDMIVendorSpecific
The specific content from the vendor of the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.15
portDDMITmperature
The internal temperature measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.16
portDDMITempHighAlarmThreshold
The high alarm threshold of the temprature for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.17
portDDMITempLowAlarmThreshold
The low alarm threshold of the temprature for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.18
portDDMITempHighWarningThreshold
The high warning threshold of the temprature for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.19
portDDMITempLowWarningThreshold
The low warning threshold of the temprature for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.20
portDDMIVoltage
The supply voltage measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.21
portDDMIVolHighAlarmThreshold
The high alarm threshold of the voltage for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.22
portDDMIVolLowAlarmThreshold
The low alarm threshold of the voltage for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.23
portDDMIVolHighWarningThreshold
The high warning threshold of the voltage for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.24
portDDMIVolLowWarningThreshold
The low warning threshold of the voltage for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.25
portDDMITxBias
The tx bias measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.26
portDDMITxBiasHighAlarmThreshold
The high alarm threshold of the tx bias for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.27
portDDMITxBiasLowAlarmThreshold
The low alarm threshold of the tx bias for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.28
portDDMITxBiasHighWarningThreshold
The high warning threshold of the tx bias for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.29
portDDMITxBiasLowWarningThreshold
The low warning threshold of the tx bias for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.30
portDDMITxPower
The tx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.31
portDDMITxPowerHighAlarmThreshold
The high alarm threshold of the tx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.32
portDDMITxPowerLowAlarmThreshold
The low alarm threshold of the tx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.33
portDDMITxPowerHighWarningThreshold
The high warning threshold of the tx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.34
portDDMITxPowerLowWarningThreshold
The low warning threshold of the tx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.35
portDDMIRxPower
The rx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.36
portDDMIRxPowerHighAlarmThreshold
The high alarm threshold of the rx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.37
portDDMIRxPowerLowAlarmThreshold
The low alarm threshold of the rx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.38
portDDMIRxPowerHighWarningThreshold
The high warning threshold of the rx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.39
portDDMIRxPowerLowWarningThreshold
The low warning threshold of the rx power for the transceiver.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.40
portDDMIAlarmStatus
The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.41
portDDMIWarningStatus
The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.42
portDDMIIsMonotorImpt
The diagnostic monitoring type that is implemented in the transceiver.
Enumeration
Enumerated Values:
1no_monitor
2has_monitor
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.43
portDDMIResult
The operation result for the transceiver.
Enumeration
Enumerated Values:
1ok
2offline
3timeout
4error
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.44
portDDMITxBias2
The tx bias measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.45
portDDMITxBias3
The tx bias measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.46
portDDMITxBias4
The tx bias measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.47
portDDMIRxPower2
The rx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.48
portDDMIRxPower3
The rx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.49
portDDMIRxPower4
The rx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.50
portDDMIAlarmStatus2
The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.51
portDDMIAlarmStatus3
The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.52
portDDMIAlarmStatus4
The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.53
portDDMIWarningStatus2
The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.54
portDDMIWarningStatus3
The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.55
portDDMIWarningStatus4
The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver.
OctetString .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.56
portDDMITxPower2
The tx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.57
portDDMITxPower3
The tx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.58
portDDMITxPower4
The tx power measured by the transceiver itself.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.59