portDDMITransmitLen
HMIT-SW-PORTMGR-DDMI-MIB ·
.1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.6
Object
column
OctetString
The link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber, 62.5 micron multimode OM1[200MHz*km at 850nm, 500MHz*km at 1310nm] fiber, 50 micron multimode OM2[500MHz*km at 850nm] fiber, 50 micron multimode OM3[2000MHz*km] fiber, copper cable, etc.
Context
- MIB
- HMIT-SW-PORTMGR-DDMI-MIB
- OID
.1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- portDDMIEntry
- Table
- portDDMITable
- Siblings
- 57
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portDDMIIFindex The index of the port. | column | Integer32 | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.1 |
| portDDMIRevisionNum The vendor revision number(vendor rev) of the transceiver.
A value of all zero indicates that the vendor rev is unspecified. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.10 |
| portDDMILaserWaveLen The laser wavelength of the transceiver. | column | Integer32 | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.11 |
| portDDMISerialNum The vendor serial number(vendor SN) of the transceiver.
A value of all zero indicates that the vendor SN is unspecified. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.12 |
| portDDMIClass No longer in use. | column | Integer32 | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.13 |
| portDDMIProductDate The produce date of the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.14 |
| portDDMIVendorSpecific The specific content from the vendor of the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.15 |
| portDDMITmperature The internal temperature measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.16 |
| portDDMITempHighAlarmThreshold The high alarm threshold of the temprature for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.17 |
| portDDMITempLowAlarmThreshold The low alarm threshold of the temprature for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.18 |
| portDDMITempHighWarningThreshold The high warning threshold of the temprature for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.19 |
| portDDMIDeviceId The physical device described by
the two-wire interface information. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.2 |
| portDDMITempLowWarningThreshold The low warning threshold of the temprature for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.20 |
| portDDMIVoltage The supply voltage measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.21 |
| portDDMIVolHighAlarmThreshold The high alarm threshold of the voltage for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.22 |
| portDDMIVolLowAlarmThreshold The low alarm threshold of the voltage for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.23 |
| portDDMIVolHighWarningThreshold The high warning threshold of the voltage for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.24 |
| portDDMIVolLowWarningThreshold The low warning threshold of the voltage for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.25 |
| portDDMITxBias The tx bias measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.26 |
| portDDMITxBiasHighAlarmThreshold The high alarm threshold of the tx bias for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.27 |
| portDDMITxBiasLowAlarmThreshold The low alarm threshold of the tx bias for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.28 |
| portDDMITxBiasHighWarningThreshold The high warning threshold of the tx bias for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.29 |
| portDDMIConnector The external optical or electrical cable connector
provided as the media interface. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.3 |
| portDDMITxBiasLowWarningThreshold The low warning threshold of the tx bias for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.30 |
| portDDMITxPower The tx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.31 |
| portDDMITxPowerHighAlarmThreshold The high alarm threshold of the tx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.32 |
| portDDMITxPowerLowAlarmThreshold The low alarm threshold of the tx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.33 |
| portDDMITxPowerHighWarningThreshold The high warning threshold of the tx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.34 |
| portDDMITxPowerLowWarningThreshold The low warning threshold of the tx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.35 |
| portDDMIRxPower The rx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.36 |
| portDDMIRxPowerHighAlarmThreshold The high alarm threshold of the rx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.37 |
| portDDMIRxPowerLowAlarmThreshold The low alarm threshold of the rx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.38 |
| portDDMIRxPowerHighWarningThreshold The high warning threshold of the rx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.39 |
| portDDMIEncoding The serial encoding mechanisms that are supported
by the particular transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.4 |
| portDDMIRxPowerLowWarningThreshold The low warning threshold of the rx power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.40 |
| portDDMIAlarmStatus The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.41 |
| portDDMIWarningStatus The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.42 |
| portDDMIIsMonotorImpt The diagnostic monitoring type that is implemented in the transceiver. | column | Enumeration | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.43 |
| portDDMIResult The operation result for the transceiver. | column | Enumeration | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.44 |
| portDDMITxBias2 The tx bias measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.45 |
| portDDMITxBias3 The tx bias measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.46 |
| portDDMITxBias4 The tx bias measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.47 |
| portDDMIRxPower2 The rx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.48 |
| portDDMIRxPower3 The rx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.49 |
| portDDMIRxPower4 The rx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.50 |
| portDDMIAlarmStatus2 The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.51 |
| portDDMIAlarmStatus3 The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.52 |
| portDDMIAlarmStatus4 The current alarm status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.53 |
| portDDMIWarningStatus2 The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.54 |
| portDDMIWarningStatus3 The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.55 |
| portDDMIWarningStatus4 The current warning status of the temprature/supply voltage
/TX bias/TX power/RX power for the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.56 |
| portDDMITxPower2 The tx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.57 |
| portDDMITxPower3 The tx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.58 |
| portDDMITxPower4 The tx power measured by the transceiver itself. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.59 |
| portDDMIVendorOUI The vendor organizationally unique identifier(OUI)
of the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.7 |
| portDDMIVendorName The vendor name of the transceiver. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.8 |
| portDDMIPartName The vendor part number(vendor PN) of the transceiver. A value
of all zero indicates that the vendor PN is unspecified. | column | OctetString | .1.3.6.1.4.1.248.100.1.6.3.1.13.6.1.9 |