HM2-TRAFFICMGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

hm2TrafficMgmtIfTable

table
.1.3.6.1.4.1.248.11.31.1.1 · 1 row entry · 10 columns
Open in standard view 
A list of management objects for traffic control per interface.
hm2TrafficMgmtIfEntry entry .1.3.6.1.4.1.248.11.31.1.1.1
Traffic Mgmt table entry.
Indexes
IF-MIBifIndex
Column Syntax OID
hm2TrafficMgmtIfFlowControl
Enables or disables flow control per port
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.31.1.1.1.1
hm2TrafficMgmtIfEgressShapingRate
Maximum bandwidth allowed for this interface as a
whole, typically used to shape the outbound
transmission rate. The value is either specified in terms
of percentage of overall link speed for the port in
1% incremen…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.11.31.1.1.1.2
hm2TrafficMgmtIfEgressShapingRateUnit
The unit of the interface shaping value.
Can be either percentage of port speed
or kilobits per second (kbps).
Enumeration
Enumerated Values:
1percent
2kbps
 .1.3.6.1.4.1.248.11.31.1.1.1.3
hm2TrafficMgmtIfIngressStormCtlThresholdUnit
Configures the units of the threshold value(s) to percentage of
port speed or absolute packets per second.
Enumerationr/w
Enumerated Values:
1percent
2pps
 .1.3.6.1.4.1.248.11.31.1.1.1.4
hm2TrafficMgmtIfIngressStormCtlBcastMode
If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.31.1.1.1.5
hm2TrafficMgmtIfIngressStormCtlBcastThreshold
Configures the broadcast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate.
This threshold is also valid for multicasts or unknown unicasts,
when the device…
Unsigned32r/w
Constraints:
range: 0-14880000
 .1.3.6.1.4.1.248.11.31.1.1.1.6
hm2TrafficMgmtIfIngressStormCtlMcastMode
If enabled, multicast storm recovery will function on this port.
When you specify Enable for multicast Storm Recovery and the multicast
traffic on this Ethernet port exceeds the configured threshold, the
switch blocks (…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.31.1.1.1.7
hm2TrafficMgmtIfIngressStormCtlMcastThreshold
Configures the multicast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate.
Unsigned32r/w
Constraints:
range: 0-14880000
 .1.3.6.1.4.1.248.11.31.1.1.1.8
hm2TrafficMgmtIfIngressStormCtlUcastMode
If enabled, unknown unicast storm recovery will function on this port.
When you specify Enable for unicast Storm Recovery and the unknown
unicast traffic on this Ethernet port exceeds the configured threshold, the
swit…
HM2-TC-MIBHmEnabledStatusr/w
Textual Convention: HM2-TC-MIBHmEnabledStatus Enumeration
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.31.1.1.1.9
hm2TrafficMgmtIfIngressStormCtlUcastThreshold
Configures the unicast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate.
Unsigned32r/w
Constraints:
range: 0-14880000
 .1.3.6.1.4.1.248.11.31.1.1.1.10