hm2TrafficMgmtIfIngressStormCtlBcastThreshold

HM2-TRAFFICMGMT-MIB · .1.3.6.1.4.1.248.11.31.1.1.1.6
MIB view Table view

Object

column r/w Unsigned32 
Configures the broadcast storm recovery threshold for this port
as a percentage of port speed in 1% increments or as an absolute pps rate.
This threshold is also valid for multicasts or unknown unicasts,
when the device does not support a separate limiter per storm type.
(A separate limiter per storm-type is supported when 
 hm2TrafficMgmtIngressStormBucketType has the value 'multi-bucket')

Context

MIB
HM2-TRAFFICMGMT-MIB
OID
.1.3.6.1.4.1.248.11.31.1.1.1.6
Type
column
Access
readwrite
Status
current
Parent
hm2TrafficMgmtIfEntry
Table
hm2TrafficMgmtIfTable
Siblings
9

Syntax

Unsigned32

Values & Constraints

Object Constraints
range: 0-14880000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hm2TrafficMgmtIfFlowControl
Enables or disables flow control per port
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.31.1.1.1.1
hm2TrafficMgmtIfIngressStormCtlUcastThreshold
Configures the unicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate.
columnUnsigned32.1.3.6.1.4.1.248.11.31.1.1.1.10
hm2TrafficMgmtIfEgressShapingRate
Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is either specified in terms of percentage of overall…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.248.11.31.1.1.1.2
hm2TrafficMgmtIfEgressShapingRateUnit
The unit of the interface shaping value. Can be either percentage of port speed or kilobits per second (kbps).
columnEnumeration.1.3.6.1.4.1.248.11.31.1.1.1.3
hm2TrafficMgmtIfIngressStormCtlThresholdUnit
Configures the units of the threshold value(s) to percentage of port speed or absolute packets per second.
columnEnumeration.1.3.6.1.4.1.248.11.31.1.1.1.4
hm2TrafficMgmtIfIngressStormCtlBcastMode
If enabled, broadcast storm recovery will function on this port. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the c…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.31.1.1.1.5
hm2TrafficMgmtIfIngressStormCtlMcastMode
If enabled, multicast storm recovery will function on this port. When you specify Enable for multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the c…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.31.1.1.1.7
hm2TrafficMgmtIfIngressStormCtlMcastThreshold
Configures the multicast storm recovery threshold for this port as a percentage of port speed in 1% increments or as an absolute pps rate.
columnUnsigned32.1.3.6.1.4.1.248.11.31.1.1.1.8
hm2TrafficMgmtIfIngressStormCtlUcastMode
If enabled, unknown unicast storm recovery will function on this port. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on this Ethernet port ex…
columnHM2-TC-MIBHmEnabledStatus.1.3.6.1.4.1.248.11.31.1.1.1.9