HIRSCHMANN-MMP4-QOS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
71

aclTable

table
.1.3.6.1.4.1.248.15.3.2.1 · 1 row entry · 2 columns
Open in standard view 
A table of ACL instances.
aclEntry entry .1.3.6.1.4.1.248.15.3.2.1.1
The entry of the aclTable.
Indexes
aclIndex
Column Syntax OID
aclIndex
The IP ACL table index this instance is associated with.
SNMPv2-SMIInteger32
Enumerated Values:
1enabled
2disabled
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.1.1.1
aclStatus
Status of this instance. Entries can not be deleted until all rows in
the aclIfTable and aclRuleTable with corresponding values of aclIndex
have been deleted.

active(1) - this ACL instance is acti…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.15.3.2.1.1.3

aclRuleTable

table
.1.3.6.1.4.1.248.15.3.2.4 · 1 row entry · 21 columns
Open in standard view 
A table of IP ACL Rule instances.
aclRuleEntry entry .1.3.6.1.4.1.248.15.3.2.4.1
A table of IP ACL Classification Rules
Indexes
FS-BFD-MIBfsBfdSessIndex aclIndex aclRuleIndex
Column Syntax OID
aclRuleIndex
The index of this rule instance within an IP ACL.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.1
aclRuleAction
The type of action this rule should perform.
Enumerationr/w
Enumerated Values:
1permit
2deny
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.15.3.2.4.1.2
aclRuleProtocol
icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.248.15.3.2.4.1.3
aclRuleSrcIpAddress
The Source IP Address used in the ACL Classification.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-4294967295
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.15.3.2.4.1.4
aclRuleSrcIpMask
The Source IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary 1's and …
SNMPv2-SMIIpAddressr/w
Constraints:
range: 0-4294967295
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.15.3.2.4.1.5
aclRuleSrcL4Port
The Source Port Number (Layer 4) used in the ACL Classification.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.6
aclRuleSrcL4PortRangeStart
The Source Port Number(Layer 4) range start.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.7
aclRuleSrcL4PortRangeEnd
The Source Port Number(Layer 4) range end.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.8
aclRuleDestIpAddress
The Destination IP Address used in the ACL Classification.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1stop
2start
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.15.3.2.4.1.9
aclRuleDestIpMask
The Destination IP Mask used in the ACL Classification.
This mask is expressed using wild-card notation,which
is the 1's compliment of traditional Subnet Masks.
Here, the 'Don't care bits' are represented by binary …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.248.15.3.2.4.1.10
aclRuleDestL4Port
The Destination Port (Layer 4) used in ACl classification.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.11
aclRuleDestL4PortRangeStart
The Destination Port (Layer 4) starting range used in ACL classification.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.12
aclRuleDestL4PortRangeEnd
The Destination Port (Layer 4) ending range used in ACL classification.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.13
aclRuleIPDSCP
The Differentiated Services Code Point value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.14
aclRuleIpPrecedence
The Type of Service (TOS) IP Precedence value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.15
aclRuleIpTosBits
The Type of Service (TOS) Bits value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.16
aclRuleIpTosMask
The Type of Service (TOS) Mask value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.17
aclRuleStatus
Status of this instance.

active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.15.3.2.4.1.18
aclRuleAssignQueueId
Queue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the numbe…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.15.3.2.4.1.19
aclRuleRedirectIntf
A non-zero value indicates the external ifIndex to which all
inbound packets matching this ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this object.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.15.3.2.4.1.20
aclRuleMatchEvery
Flag to indicate that the acl rule is defined to match on every IP packet,
regardless of content.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.15.3.2.4.1.21

aclMacTable

table
.1.3.6.1.4.1.248.15.3.2.6 · 1 row entry · 3 columns
Open in standard view 
A table of MAC ACL instances.
aclMacEntry entry .1.3.6.1.4.1.248.15.3.2.6.1
The entry of the aclMacTable.
Indexes
aclMacIndex
Column Syntax OID
aclMacIndex
The MAC ACL table index this instance is associated with.
When creating a new MAC ACL, refer to the aclMacIndexNextFree
object to determine the next available aclMacIndex to use.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.6.1.1
aclMacName
The name of this MAC ACL entry, which must consist of
1 to 31 alphanumeric characters and uniquely identify
this MAC ACL. An existing MAC ACL can be renamed by
setting this object to a new name.

This obj…
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.248.15.3.2.6.1.2
aclMacStatus
Status of this instance. ACL MAC entries can not be deleted until all rows in
the aclIfTable and aclRuleTable with corresponding values of aclMacIndex
have been deleted.

active(1) - this ACL insta…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.15.3.2.6.1.3

aclMacRuleTable

table
.1.3.6.1.4.1.248.15.3.2.7 · 1 row entry · 20 columns
Open in standard view 
A table of layer 2 MAC ACL Rule instances.
aclMacRuleEntry entry .1.3.6.1.4.1.248.15.3.2.7.1
A table of layer 2 MAC ACL Classification Rules
Indexes
aclMacIndex aclMacRuleIndex
Column Syntax OID
aclMacRuleIndex
The index of this rule instance within an MAC ACL.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.7.1.1
aclMacRuleAction
The type of action this MAC ACL rule should perform.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.248.15.3.2.7.1.2
aclMacRuleCos
The Class of Service (COS) used in the MAC ACL Classification.

This is the three-bit user priority field in the 802.1Q tag
header of a tagged Ethernet frame. For frames containing a
double VLAN tag, thi…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.15.3.2.7.1.3
aclMacRuleCos2
The Secondary Class of Service (COS2) used in the MAC ACL Classification.

This is the three-bit user priority field in the second/inner 802.1Q
tag header of a double VLAN tagged Ethernet frame.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.15.3.2.7.1.4
aclMacRuleDestMacAddr
The Destination MAC address used in the MAC ACL Classification.
SNMPv2-TCMacAddressr/w
Constraints:
range: -1-255
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.15.3.2.7.1.5
aclMacRuleDestMacMask
The Destination MAC address mask used in the MAC ACL Classification.

This mask value identifies the portion of the aclMacRuleDestMacAddr
that is compared against a packet. A non-contiguous mask value is …
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.15.3.2.7.1.6
aclMacRuleEtypeKey
The Ethertype keyword used in the MAC ACL Classification.

A keyword of custom(1) requires that the aclMacRuleEtypeValue
object also be set.
Enumerationr/w
Enumerated Values:
1custom
2appletalk
3arp
4ibmsna
5ipv4
6ipv6
7ipx
8mplsmcast
9mplsucast
10netbios
11novell
12pppoe
13rarp
 .1.3.6.1.4.1.248.15.3.2.7.1.7
aclMacRuleEtypeValue
The Ethertype custom value used in the MAC ACL Classification.

This object is only valid if the aclMacRuleEtypeKey is set to
custom(1). The allowed value for this object is 0x0600 to 0xFFFF
(1536 to 65…
EtypeValuer/w
Textual Convention: EtypeValue Unsigned32
Type Constraints:
range: 1536..65535
 .1.3.6.1.4.1.248.15.3.2.7.1.8
aclMacRuleSrcMacAddr
The Source MAC address used in the MAC ACL Classification.
SNMPv2-TCMacAddressr/w
Constraints:
range: 0-255
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.15.3.2.7.1.9
aclMacRuleSrcMacMask
The Source MAC address mask used in the MAC ACL Classification.

This mask value identifies the portion of the aclMacRuleSrcMacAddr
that is compared against a packet. A non-contiguous mask value is
permi…
SNMPv2-TCMacAddressr/w
Constraints:
range: 0-255
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.248.15.3.2.7.1.10
aclMacRuleVlanId
The VLAN ID value used in the MAC ACL Classification.

The VLAN ID field is defined as the 12-bit VLAN identifier
in the 802.1Q tag header of a tagged Ethernet frame. This is
contained in the first/outer…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.248.15.3.2.7.1.11
aclMacRuleVlanIdRangeStart
The VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanIdRangeEnd
changes the VLAN ID range end to the same value as the range start.

T…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.248.15.3.2.7.1.12
aclMacRuleVlanIdRangeEnd
The VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanIdRangeStart
changes the VLAN ID range start to the same value as the range end.

The …
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.248.15.3.2.7.1.13
aclMacRuleVlanId2
The Secondary VLAN ID value used in the MAC ACL Classification.

The Secondary VLAN ID field is defined as the 12-bit VLAN identifier
in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet …
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.248.15.3.2.7.1.14
aclMacRuleVlanId2RangeStart
The Secondary VLAN ID range start value used in the MAC ACL Classification.
Setting this value greater than the current aclMacRuleVlanId2RangeEnd
changes the Secondary VLAN ID range end to the same value as the range st…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.248.15.3.2.7.1.15
aclMacRuleVlanId2RangeEnd
The Secondary VLAN ID range end value used in the MAC ACL Classification.
Setting this value less than the current aclMacRuleVlanId2RangeStart
changes the Secondary VLAN ID range start to the same value as the range end…
Unsigned32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.248.15.3.2.7.1.16
aclMacRuleStatus
Status of this instance.

active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.15.3.2.7.1.17
aclMacRuleAssignQueueId
Queue identifier to which all inbound packets matching this
MAC ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE 802.1D
specification based on the n…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.15.3.2.7.1.18
aclMacRuleRedirectIntf
A non-zero value indicates the external ifIndex to which all
inbound packets matching this MAC ACL rule are directed. A
value of zero means packet redirection is not in effect, which
is the default value of this objec…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.15.3.2.7.1.19
aclMacRuleMatchEvery
Flag to indicate that the MAC acl rule is defined to match all packets,
regardless of Ethertype.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.248.15.3.2.7.1.20

aclIfTable

table
.1.3.6.1.4.1.248.15.3.2.8 · 1 row entry · 6 columns
Open in standard view 
A table of ACL interface instances per direction.
aclIfEntry entry .1.3.6.1.4.1.248.15.3.2.8.1
The entry of the aclIfTable.
Indexes
aclIfIndex aclIfDirection aclIfSequence aclIfAclType aclIfAclId
Column Syntax OID
aclIfIndex
The interface to which this ACL instance applies.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.8.1.1
aclIfDirection
The interface direction to which this ACL instance applies.
Enumeration
Enumerated Values:
1inbound
2outbound
 .1.3.6.1.4.1.248.15.3.2.8.1.2
aclIfSequence
The relative evaluation sequence of this ACL for this
interface and direction. When multiple ACLs are allowed
for a given interface and direction, the sequence number
determines the order in which the list of ACLs ar…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.248.15.3.2.8.1.3
aclIfAclType
The type of this ACL, which is used to interpret the
aclIfId object value. Each type of ACL uses its own
numbering scheme for identification (see aclIfId object
for details).

The aclIfId object must be …
Enumeration
Enumerated Values:
1ip
2mac
 .1.3.6.1.4.1.248.15.3.2.8.1.4
aclIfAclId
The ACL identifier value, which is interpreted based on
the aclIfType object.

For the IP ACLs, the actual ACL number is its identifier
as follows: IP standard ranges from 1-99, while
IP extended ranges …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.248.15.3.2.8.1.5
aclIfStatus
Status of this instance.

active(1) - this ACL interface instance is active
createAndGo(4) - set to this value to assign an ACL to an interface and direction
destroy(6) - set to this value to remo…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.248.15.3.2.8.1.6

hmAgentCosMapIpPrecTable

table
.1.3.6.1.4.1.248.15.3.3.1.1 · 1 row entry · 3 columns
Open in standard view 
A table mapping evaluated IP precedence to Traffic 
Class for a specific physical port.  Traffic class 
is a number in the range 
(0..(dot1dPortNumTrafficClasses-1)).
hmAgentCosMapIpPrecEntry entry .1.3.6.1.4.1.248.15.3.3.1.1.1
IP Precedence to Traffic Class mapping for a port.
Indexes
hmAgentCosMapIpPrecIntfIndex hmAgentCosMapIpPrecValue
Column Syntax OID
hmAgentCosMapIpPrecIntfIndex
This is a unique index for an entry in the
hmAgentCosMapIpPrecTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTable. A value of zero represents global
configuration, …
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.15.3.3.1.1.1.1
hmAgentCosMapIpPrecValue
The IP precedence value contained in the received
frame. This value is only indicated in IP packets,
but is independent of both media-type and frame
tagging.

Non-IP packets are handled in accordance …
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.15.3.3.1.1.1.2
hmAgentCosMapIpPrecTrafficClass
Traffic class priority queue the received frame is
mapped to. This represents the actual configuration
setting the port is using.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.15.3.3.1.1.1.3

hmAgentCosMapIpDscpTable

table
.1.3.6.1.4.1.248.15.3.3.1.2 · 1 row entry · 3 columns
Open in standard view 
A table mapping evaluated IP DSCP to Traffic Class 
for a specific physical port.  Traffic class is a 
number in the range 
(0..(dot1dPortNumTrafficClasses-1)).
hmAgentCosMapIpDscpEntry entry .1.3.6.1.4.1.248.15.3.3.1.2.1
IP DSCP to Traffic Class mapping for a port.
Indexes
hmAgentCosMapIpDscpIntfIndex hmAgentCosMapIpDscpValue
Column Syntax OID
hmAgentCosMapIpDscpIntfIndex
This is a unique index for an entry in the
hmAgentCosMapIpDscpTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTable. A value of zero represents global
configuration, …
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.15.3.3.1.2.1.1
hmAgentCosMapIpDscpValue
The IP DSCP value contained in the received frame.
This value is only indicated in IP packets, but is
independent of both media-type and frame tagging.

Non-IP packets are handled in accordance with the…
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.248.15.3.3.1.2.1.2
hmAgentCosMapIpDscpTrafficClass
Traffic class priority queue the received frame is
mapped to.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.15.3.3.1.2.1.3

hmAgentCosMapIntfTrustTable

table
.1.3.6.1.4.1.248.15.3.3.1.3 · 1 row entry · 3 columns
Open in standard view 
Specifies the interface trust mode of operation for 
a port.  The trust mode setting determines which COS 
mapping table is used for directing ingress packets 
to a Traffic Class.
hmAgentCosMapIntfTrustEntry entry .1.3.6.1.4.1.248.15.3.3.1.3.1
COS interface trust mode.
Indexes
hmAgentCosMapIntfTrustIntfIndex
Column Syntax OID
hmAgentCosMapIntfTrustIntfIndex
This is a unique index for an entry in the
hmAgentCosMapIntfTrustTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTable. A value of zero represents global
configuratio…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.15.3.3.1.3.1.1
hmAgentCosMapIntfTrustMode
The class of service trust mode of an interface.
When set to a trusted mode, the appropriate COS
mapping table is used as follows:

trustDot1p(2) : dot1dTrafficClassTable
trustIpPrecedence(3):…
Enumerationr/w
Enumerated Values:
1untrusted
2trustDot1p
3trustIpPrecedence
4trustIpDscp
 .1.3.6.1.4.1.248.15.3.3.1.3.1.2
hmAgentCosMapUntrustedTrafficClass
The traffic class (i.e. hardware queue) to which all
untrusted traffic is assigned. This includes all
traffic when the hmAgentCosMapIntfTrustMode is set to
untrusted(1), or just non-IP packets when in
trustIpPrece…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.15.3.3.1.3.1.3

hmAgentCosQueueControlTable

table
.1.3.6.1.4.1.248.15.3.3.2.3 · 1 row entry · 5 columns
Open in standard view 
Table of class-of-service queue configuration 
controls for the specified interface.
hmAgentCosQueueControlEntry entry .1.3.6.1.4.1.248.15.3.3.2.3.1
Provides a general control mechanism that affects
all queues on a given interface.
Indexes
hmAgentCosQueueIntfIndex
Column Syntax OID
hmAgentCosQueueIntfIndex
This is a unique index for an entry in the
hmAgentCosQueueControlTable, hmAgentCosQueueTable,
or hmAgentCosQueueMgmtTable. A non-zero value indicates
the ifIndex for the corresponding interface entry
in the ifTa…
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.248.15.3.3.2.3.1.1
hmAgentCosQueueIntfShapingRate
Maximum bandwidth allowed for this interface as a
whole, typically used to shape the outbound
transmission rate. The value is specified in terms
of percentage of overall link speed for the port in
1% increments. A …
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.248.15.3.3.2.3.1.2
hmAgentCosQueueMgmtTypeIntf
The management technique used for all queues on this
interface. If taildrop(1), then all new packets
presented to the queues are dropped based on some
maximum threshold value(s). If wred(2), then an
active queue ma…
Enumerationr/w
Enumerated Values:
1taildrop
2wred
 .1.3.6.1.4.1.248.15.3.3.2.3.1.3
hmAgentCosQueueWredDecayExponent
The decay exponent value used with the weighted
random early discard (WRED) algorithm to determine
how quickly the average queue length calculation
reacts to the current length of the queue. A higher
value produces…
Unsigned32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.248.15.3.3.2.3.1.4
hmAgentCosQueueDefaultsRestore
Causes the default values to be restored for all COS
queue objects defined for this interface. This
includes objects in the following tables:
hmAgentCosQueueTable
hmAgentCosQueueMgmtTable
…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.248.15.3.3.2.3.1.5

hmAgentCosQueueTable

table
.1.3.6.1.4.1.248.15.3.3.2.4 · 1 row entry · 5 columns
Open in standard view 
Table of class-of-service queue configuration 
parameters for the specified interface.
hmAgentCosQueueEntry entry .1.3.6.1.4.1.248.15.3.3.2.4.1
Each entry describes a single class-of-service (COS)
queue for a given Interface Index. The number of
configurable COS queues for an interface vary based
on device capabilities.

All objects defined for …
Indexes
hmAgentCosQueueIntfIndex hmAgentCosQueueIndex
Column Syntax OID
hmAgentCosQueueIndex
The COS queue index, numbered 0 to (n-1), where n is
the total number of configurable interface queues for
the device as indicated by hmAgentCosQueueNumQueuesPerPort.
In general, a higher numbered queue index is used …
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.248.15.3.3.2.4.1.1
hmAgentCosQueueSchedulerType
The type of scheduling used for this queue. If
strict(1), then all traffic placed on this queue is
transmitted before any queue with a lower precedence
(lower hmAgentCosQueueIndex). A weighted(2) scheme
gives this…
Enumerationr/w
Enumerated Values:
1strict
2weighted
 .1.3.6.1.4.1.248.15.3.3.2.4.1.2
hmAgentCosQueueMinBandwidth
Minimum guaranteed bandwidth allotted to this queue.
The value is specified in terms of percentage of
overall link speed for the port in 1% increments. A
value of 0 means there is no guaranteed minimum
bandwidth in…
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.248.15.3.3.2.4.1.3
hmAgentCosQueueMaxBandwidth
Maximum bandwidth allowed for this queue, typically
used to shape the outbound transmission rate. The
value is specified in terms of percentage of overall
link speed for the port in 1% increments. A value
of 0 mean…
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.248.15.3.3.2.4.1.4
hmAgentCosQueueMgmtType
The queue depth management technique used when
per-queue specification is supported. If
taildrop(1), then all new packets presented to the
queue are dropped based on some maximum threshold
value(s). If wred(2), the…
Enumerationr/w
Enumerated Values:
1taildrop
2wred
 .1.3.6.1.4.1.248.15.3.3.2.4.1.5