hmAgentCosQueueMaxBandwidth
HIRSCHMANN-MMP4-QOS-MIB ·
.1.3.6.1.4.1.248.15.3.3.2.4.1.4
Object
column
r/w
Unsigned32
Maximum bandwidth allowed for this queue, typically
used to shape the outbound transmission rate. The
value is specified in terms of percentage of overall
link speed for the port in 1% increments. A value
of 0 means there is no maximum bandwidth limit in
effect and that the queue is allowed to use any
available excess bandwidth (i.e., work conserving
method). The default value is 0.
When set to a non-zero value, the queue is restricted
to using at most the bandwidth specified in this
object for the outbound transmission rate (i.e.,
non-work-conserving method). Any non-zero value set
for this object must be equal to or greater than the
value of hmAgentCosQueueMinBandwidth for the same
hmAgentCosQueueIndex on this interface.
Context
- MIB
- HIRSCHMANN-MMP4-QOS-MIB
- OID
.1.3.6.1.4.1.248.15.3.3.2.4.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hmAgentCosQueueEntry
- Table
- hmAgentCosQueueTable
- Siblings
- 4
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmAgentCosQueueIndex The COS queue index, numbered 0 to (n-1), where n is
the total number of configurable interface queues for
the device as indicated by hmAgentCosQueueNumQueuesPerPort.
In general… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.248.15.3.3.2.4.1.1 |
| hmAgentCosQueueSchedulerType The type of scheduling used for this queue. If
strict(1), then all traffic placed on this queue is
transmitted before any queue with a lower precedence
(lower hmAgentCosQueueI… | column | Enumeration | .1.3.6.1.4.1.248.15.3.3.2.4.1.2 |
| hmAgentCosQueueMinBandwidth Minimum guaranteed bandwidth allotted to this queue.
The value is specified in terms of percentage of
overall link speed for the port in 1% increments. A
value of 0 means ther… | column | Unsigned32 | .1.3.6.1.4.1.248.15.3.3.2.4.1.3 |
| hmAgentCosQueueMgmtType The queue depth management technique used when
per-queue specification is supported. If
taildrop(1), then all new packets presented to the
queue are dropped based on some maxi… | column | Enumeration | .1.3.6.1.4.1.248.15.3.3.2.4.1.5 |