HH3C-PBR-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
48
.1.3.6.1.4.1.25506.2.113.2.1
·
1 row entry
·
19 columns
A table for PBR nodes.
An entry for PBR nodes.
Indexes
hh3cPBRMibPolicyNodeAddrType hh3cPBRMibPolicyName hh3cPBRMibPolicyNodeId
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cPBRMibPolicyNodeAddrType
Address type of policy node, which can be IPv4 or IPv6, Dual-stack.
|
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.1 |
||||||||||||||
|
hh3cPBRMibPolicyName
Policy name of PBR node.
|
OctetString Constraints: range: 1-19 |
.1.3.6.1.4.1.25506.2.113.2.1.1.2 |
||||||||||||||
|
hh3cPBRMibPolicyNodeId
Sequence identifier of PBR node.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.25506.2.113.2.1.1.3 |
||||||||||||||
|
hh3cPBRMibPolicyNodeMode
Mode of PBR node. If the mode of a node is marked as true,
the packets that meet the matching rules are processed by action rules in the node. If the mode of a node is marked as false, the packets that meet the matchi… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.4 |
||||||||||||||
|
hh3cPBRMibPolicyNodeRowStatus
Operation status of this table entry.
Three actions are used: active, createAndGo, and destroy. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.5 |
||||||||||||||
|
hh3cPBRMibMinPktLen
Specifies the minimum IP packet length in the range of 1 and 65535.
Value 0 indicates that this rule is not set. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.1.1.6 |
||||||||||||||
|
hh3cPBRMibMaxPktLen
Specifies the maximum IP packet length in the range of 1 and 65535.
The maximum length must be no less than the minimum length. The maximum and the minimum lengths must be both configured. Value 0 indicates that this ru… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.1.1.7 |
||||||||||||||
|
hh3cPBRMibQosId
Specifies a local Quality of Service(QoS) ID in the range of 1 and 4095.
Value 0 indicates that this rule is not set. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.1.1.8 |
||||||||||||||
|
hh3cPBRMibQosIdMode
The mode of the QoS Local ID.
The default value is normal. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.9 |
||||||||||||||
|
hh3cPBRMibVxlanId
Specifies a VXLAN ID in the range of 0 to 16777215.
Value -1 indicates that this rule is not set. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.1.1.10 |
||||||||||||||
|
hh3cPBRMibDescription
A description for a policy node.
|
OctetStringr/w Constraints: range: 0-127 |
.1.3.6.1.4.1.25506.2.113.2.1.1.11 |
||||||||||||||
|
hh3cPBRMibApplyContinue
Use apply continue to compare packets
with the next policy node upon failure on the current node. Value FALSE indicates that this action is not set. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.12 |
||||||||||||||
|
hh3cPBRMibApplyFailDropNextHop
Configure the policy node to drop matching packets when
the next hop is invalid. If no next hops are specified on the policy node, this command drops all packets that match the node. Value FALSE indicates that this act… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.13 |
||||||||||||||
|
hh3cPBRMibApplyIpDf
Sets the Don't Fragment(DF) bit in the IP header of
matching packets. The value can be 0 or 1. Value -1 indicates that this action is not set. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.1.1.14 |
||||||||||||||
|
hh3cPBRMibApplyLoadShareNextHop
Enables load sharing among multiple next hops.
Value FALSE indicates that this action is not set. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.15 |
||||||||||||||
|
hh3cPBRMibApplyLoadShareOutIf
Enables load sharing among multiple output interfaces.
Value FALSE indicates that this action is not set. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.16 |
||||||||||||||
|
hh3cPBRMibApplyLSDefaultNextHop
Enables load sharing among multiple default next hops.
Value FALSE indicates that this action is not set. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.17 |
||||||||||||||
|
hh3cPBRMibApplyLSDefaultOutIf
Enables load sharing among multiple default output interfaces.
Value FALSE indicates that this action is not set. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.18 |
||||||||||||||
|
hh3cPBRMibApplyStatisticsValue
Use apply statistics to enable match counting on a policy node.
Value FALSE indicates that this action is not set. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.1.1.19 |
hh3cPBRMibIfPolicyTable
table.1.3.6.1.4.1.25506.2.113.2.2
·
1 row entry
·
4 columns
A table for interfaces being applied with PBR nodes with the same policy name.
An entry for reference relation between interface and policy
nodes.
nodes.
Indexes
hh3cPBRMibPolicyAddressType IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cPBRMibPolicyAddressType
Address type of policy node, which can be
IPv4 or IPv6, Dual-stack. |
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.2.1.1 |
||||||||||||||
|
hh3cPBRMibAppliedPolicyName
Policy name of PBR nodes.
|
OctetStringr/w Constraints: range: 1-19 |
.1.3.6.1.4.1.25506.2.113.2.2.1.2 |
||||||||||||||
|
hh3cPBRMibIfPolicyRowStatus
Operation status of this table entry.
Three actions are used: active, createAndGo, and destroy. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.2.1.3 |
||||||||||||||
|
hh3cPBRMibIfPolicyShareMode
Applies the policy in resource sharing mode.
In this mode, all interfaces on an interface card with the same policy applied share one hardware resource. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.2.1.4 |
hh3cPBRMibMatchAclTable
table.1.3.6.1.4.1.25506.2.113.2.3
·
1 row entry
·
3 columns
A table for ACLs being used by a policy node. Only one ACL can be used within a node at most.
An entry for policy node that uses an ACL group as its
if-match rule.
if-match rule.
Indexes
hh3cPBRMibPolicyNodeAddrType hh3cPBRMibPolicyName hh3cPBRMibPolicyNodeId
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cPBRMibAclGroupId
Index of number-acl group.
Setting -1 indicates closing this rule. When ACLName is configured with a valid value, value -1 will be returned for ACLNumber. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.3.1.1 |
||||||||
|
hh3cPBRMibAclGroupName
ACL match criterion by name. The ACL name must start with
letter a to z or A to Z. The ACL name cannot be all in any combination of upper-case and lower-case letters. To delete an ACL match criterion, you must configur… |
OctetStringr/w Constraints: range: 0-63 |
.1.3.6.1.4.1.25506.2.113.2.3.1.2 |
||||||||
|
hh3cPBRMibAclGroupVersion
The type of the ACL.
The hh3cPBRMibAclGroupVersion can only be configured when the policy node type is Dual-stack, and cannot be empty. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.25506.2.113.2.3.1.3 |
.1.3.6.1.4.1.25506.2.113.2.4
·
1 row entry
·
1 columns
A table for precedence values being used by a policy node. Only one precedence value can be used within a node at most.
An entry for policy node with an action
to set IP precedence for matching packets.
to set IP precedence for matching packets.
Indexes
hh3cPBRMibPolicyNodeAddrType hh3cPBRMibPolicyName hh3cPBRMibPolicyNodeId
| Column | Syntax | OID |
|---|---|---|
|
hh3cPBRMibApplyPrecedenceValue
Value of precedence being applied on IP header.
<0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify immediate preceden… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.4.1.1 |
.1.3.6.1.4.1.25506.2.113.2.5
·
1 row entry
·
11 columns
A table for next hop actions being used by a policy node.
An entry for policy node with an action
to set next hop for matching packets.
to set next hop for matching packets.
Indexes
hh3cPBRMibPolicyNodeAddrType hh3cPBRMibPolicyName hh3cPBRMibPolicyNodeId hh3cPBRMibApplyNexthopIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cPBRMibApplyNexthopIndex
Index of next hop for the apply next hop action.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.25506.2.113.2.5.1.1 |
||||||||||||||
|
hh3cPBRMibApplyNexthopVpnName
Name of VPN instance where apply next hop action is used.
|
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.25506.2.113.2.5.1.2 |
||||||||||||||
|
hh3cPBRMibApplyNexthopAddressType
Address type of hh3cPBRMibApplyNexthopAddress,
which can be IPv4 or IPv6. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.5.1.3 |
||||||||||||||
|
hh3cPBRMibApplyNexthopAddress
Next hop IP address of apply next hop action.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.25506.2.113.2.5.1.4 |
||||||||||||||
|
hh3cPBRMibApplyNexthopTrackId
Identifier of track object related with next hop.
Specifies a track entry by its number in the range of 1 to 1024. Setting 0 indicates closing this function. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.5.1.5 |
||||||||||||||
|
hh3cPBRMibApplyNexthopDirect
Direct route attribute of next hop
according to route information. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.5.1.6 |
||||||||||||||
|
hh3cPBRMibApplyNexthopRowStatus
Operation status of this table entry.
Three actions are used: active, createAndGo, and destroy. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.5.1.7 |
||||||||||||||
|
hh3cPBRMibApplyNexthopInboundVpn
Specifies the VPN instance where the inbound interface belongs.
If the value is set to TRUE, the VPN instance name will be ignored. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.5.1.8 |
||||||||||||||
|
hh3cPBRMibApplyNexthopWeight
Specifies a load sharing weight in the range of 1 and 100 for the next hop.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.5.1.9 |
||||||||||||||
|
hh3cPBRMibApplyNexthopPathId
Specifies a service chain by its path ID in the range of 1 and 16777215.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.5.1.10 |
||||||||||||||
|
hh3cPBRMibApplyNexthopPathIndex
Specifies a node in the service chain as
a next hop by its index in the range of 1 and 255. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.5.1.11 |
.1.3.6.1.4.1.25506.2.113.2.6
·
1 row entry
·
10 columns
A table for default next hop actions being used by a policy node.
An entry for policy node with an action
to set default next hop for matching packets.
to set default next hop for matching packets.
Indexes
hh3cPBRMibPolicyNodeAddrType hh3cPBRMibPolicyName hh3cPBRMibPolicyNodeId hh3cPBRMibApplyDefaultNexthopIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
hh3cPBRMibApplyDefaultNexthopIndex
Index of default next hop for the apply
default next hop action. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.25506.2.113.2.6.1.1 |
||||||||||||||
|
hh3cPBRMibApplyDefaultNexthopVpnName
Name of VPN instance where apply default next hop action
is used. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.25506.2.113.2.6.1.2 |
||||||||||||||
|
hh3cPBRMibApplyDefaultNexthopAddressType
Address type of hh3cPBRMibApplyDefaultNexthopAddress,
which can be IPv4 or IPv6. |
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.6.1.3 |
||||||||||||||
|
hh3cPBRMibApplyDefaultNexthopAddress
Next hop IP address of apply default next hop action.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.25506.2.113.2.6.1.4 |
||||||||||||||
|
hh3cPBRMibApplyDefaultNexthopTrackId
Identifier of track object related with default next hop.
Specifies a track entry by its number in the range of 1 to 1024. Setting 0 indicates closing this function. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.6.1.5 |
||||||||||||||
|
hh3cPBRMibApplyDefaultNexthopDirect
Direct route attribute of apply default next hop
address according to route information. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.6.1.6 |
||||||||||||||
|
hh3cPBRMibApplyDefaultNexthopRowStatus
Operation status of this table entry.
Three actions are used: active, createAndGo, and destroy. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.6.1.7 |
||||||||||||||
|
hh3cPBRMibApplyDefNexthopInbVpn
Specifies the VPN instance where the inbound interface belongs.
If the value is set to TRUE, the VPN instance name will be ignored. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.25506.2.113.2.6.1.8 |
||||||||||||||
|
hh3cPBRMibApplyDefNexthopPathId
Specifies a service chain by its path ID in the range of 1 and 16777215.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.6.1.9 |
||||||||||||||
|
hh3cPBRMibApplyDefNexthopPathInd
Specifies a node in the service chain as
a default next hop by its index in the range of 1 and 255. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.25506.2.113.2.6.1.10 |