hh3cPBRMibApplyFailDropNextHop

HH3C-PBR-MIB · .1.3.6.1.4.1.25506.2.113.2.1.1.13
MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
Configure the policy node to drop matching packets when
the next hop is invalid.  If no next hops are specified
on the policy node, this command drops all packets that
match the node. Value FALSE indicates that this action is not set.

Context

MIB
HH3C-PBR-MIB
OID
.1.3.6.1.4.1.25506.2.113.2.1.1.13
Type
column
Access
readwrite
Status
current
Parent
hh3cPBRMibPolicyNodeEntry
Table
hh3cPBRMibPolicyNodeTable
Siblings
18

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
hh3cPBRMibPolicyNodeAddrType
Address type of policy node, which can be IPv4 or IPv6, Dual-stack.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.25506.2.113.2.1.1.1
hh3cPBRMibVxlanId
Specifies a VXLAN ID in the range of 0 to 16777215. Value -1 indicates that this rule is not set.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.113.2.1.1.10
hh3cPBRMibDescription
A description for a policy node.
columnOctetString.1.3.6.1.4.1.25506.2.113.2.1.1.11
hh3cPBRMibApplyContinue
Use apply continue to compare packets with the next policy node upon failure on the current node. Value FALSE indicates that this action is not set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.12
hh3cPBRMibApplyIpDf
Sets the Don't Fragment(DF) bit in the IP header of matching packets. The value can be 0 or 1. Value -1 indicates that this action is not set.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.113.2.1.1.14
hh3cPBRMibApplyLoadShareNextHop
Enables load sharing among multiple next hops. Value FALSE indicates that this action is not set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.15
hh3cPBRMibApplyLoadShareOutIf
Enables load sharing among multiple output interfaces. Value FALSE indicates that this action is not set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.16
hh3cPBRMibApplyLSDefaultNextHop
Enables load sharing among multiple default next hops. Value FALSE indicates that this action is not set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.17
hh3cPBRMibApplyLSDefaultOutIf
Enables load sharing among multiple default output interfaces. Value FALSE indicates that this action is not set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.18
hh3cPBRMibApplyStatisticsValue
Use apply statistics to enable match counting on a policy node. Value FALSE indicates that this action is not set.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.19
hh3cPBRMibPolicyName
Policy name of PBR node.
columnOctetString.1.3.6.1.4.1.25506.2.113.2.1.1.2
hh3cPBRMibPolicyNodeId
Sequence identifier of PBR node.
columnInteger32.1.3.6.1.4.1.25506.2.113.2.1.1.3
hh3cPBRMibPolicyNodeMode
Mode of PBR node. If the mode of a node is marked as true, the packets that meet the matching rules are processed by action rules in the node. If the mode of a node is marked as…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25506.2.113.2.1.1.4
hh3cPBRMibPolicyNodeRowStatus
Operation status of this table entry. Three actions are used: active, createAndGo, and destroy.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.25506.2.113.2.1.1.5
hh3cPBRMibMinPktLen
Specifies the minimum IP packet length in the range of 1 and 65535. Value 0 indicates that this rule is not set.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.113.2.1.1.6
hh3cPBRMibMaxPktLen
Specifies the maximum IP packet length in the range of 1 and 65535. The maximum length must be no less than the minimum length. The maximum and the minimum lengths must be both co…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.113.2.1.1.7
hh3cPBRMibQosId
Specifies a local Quality of Service(QoS) ID in the range of 1 and 4095. Value 0 indicates that this rule is not set.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25506.2.113.2.1.1.8
hh3cPBRMibQosIdMode
The mode of the QoS Local ID. The default value is normal.
columnEnumeration.1.3.6.1.4.1.25506.2.113.2.1.1.9