H3C-BFD-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
28

h3cBfdIfTable

table
.1.3.6.1.4.1.2011.10.2.72.1.2 · 1 row entry · 5 columns
Open in standard view 
This Table describes the BFD interface specific information.
h3cBfdIfEntry entry .1.3.6.1.4.1.2011.10.2.72.1.2.1
This Entry describes the BFD interface specific information.
Indexes
h3cBfdIfIndex
Column Syntax OID
h3cBfdIfIndex
This variable contains an index that represents a
unique BFD interface on this device.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.10.2.72.1.2.1.1
h3cBfdIfDesiredMinTxInterval
This variable defines the minimum interval, in
microseconds, that the interface would like to use when
transmitting BFD Control packets.
BfdIntervalr/w
Textual Convention: BfdInterval Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.2.1.2
h3cBfdIfDesiredMinRxInterval
This variable defines the minimum interval, in,
microseconds, between received BFD Control packets the
local system is capable of supporting.
BfdIntervalr/w
Textual Convention: BfdInterval Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.2.1.3
h3cBfdIfDetectMult
The desired detect time multiplier for BFD control packets.
The negotiated control packet transmission interval, multiplied
by this variable, will be the detection time for this session
(as seen by the remote system.) …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.2.1.4
h3cBfdIfAuthType
The Authentication Type used for this interface. This
field is valid only when the Authentication Present bit is set.

The 'none' indicates the session doesn't support
authentication.
The 'simple' indicate…
Enumeration
Enumerated Values:
1none
2simple
3md5
4mmd5
5sha1
6msha1
 .1.3.6.1.4.1.2011.10.2.72.1.2.1.5

h3cBfdSessTable

table
.1.3.6.1.4.1.2011.10.2.72.1.3 · 1 row entry · 15 columns
Open in standard view 
This table describes the BFD sessions.
h3cBfdSessEntry entry .1.3.6.1.4.1.2011.10.2.72.1.3.1
This Entry describes the BFD sessions.
Indexes
h3cBfdSessIndex
Column Syntax OID
h3cBfdSessIndex
This variable contains an index which represents a
unique BFD session on this device.
BfdSessIndexTC
Textual Convention: BfdSessIndexTC Unsigned32
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.1
h3cBfdSessIfIndex
This variable contains an interface's index under which the BFD
session runs.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.2
h3cBfdSessAppSupportId
This variable contains an ID used to indicate
a local application which owns or maintains this
BFD session. Note, a BFD session can support several route
protocols. This is a bit-map of possible conditions.
The correspo…
Bits
Enumerated Values:
0none
1ospf
2isis
3bgp
4mpls
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.3
h3cBfdSessLocalDiscr
This variable defines the local discriminator for this BFD
session, used to uniquely identify it.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.4
h3cBfdSessRemoteDiscr
This variable defines the session discriminator chosen
by the remote system for this BFD session.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.5
h3cBfdSessDstPort
The UDP Port for BFD. The default value is the
well-known value for this port.
INET-ADDRESS-MIBInetPortNumber
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.6
h3cBfdSessOperMode
This variable defines current operating mode that BFD
session is running in.

The primary mode which the BFD session runs in is known as
Asynchronous mode. In this mode, the systems periodically
send BFD …
Enumeration
Enumerated Values:
1asynchModeWOEchoFun
2demandModeWOEchoFunction
3asyncModeWEchoFun
4demandModeWEchoFunction
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.7
h3cBfdSessAddrType
This object defines IP address type of the interface
associated with this BFD session.

Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.

A value of unknown(0) is allowed only…
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.8
h3cBfdSessLocalAddr
This variable defines IP address of the local interface
from which the BFD packets is transmitted.
It can also be used to enabled BFD on a specific
interface. The value is set to zero when BFD session is not
associated …
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.9
h3cBfdSessRemoteAddr
This variable defines IP address of the remote interface
from which the BFD packets is transmitted.
It can also be used to enabled BFD on a specific
interface. The value is set to zero when BFD session is not
associated…
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.10
h3cBfdSessLocalDiag
The BFD diagnostic code for the BFD session was down with the
neighbor. If no such event happens this object contains a zero
value.
BfdDiag
Textual Convention: BfdDiag Enumeration
Type Values:
1noDiagnostic
2controlDetectionTimeExpired
3echoFunctionFailed
4neighborSignaledSessionDown
5forwardingPlaneReset
6pathDown
7concatenatedPathDown
8administrativelyDown
9reverseConcatenatedPathDown
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.11
h3cBfdSessState
The state of the running BFD session.

There are three states through which a session normally
proceeds, two for establishing a session (Init and Up)
and one for tearing down a session (Down.) This allows…
Enumeration
Enumerated Values:
0adminDown
1down
2init
3up
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.12
h3cBfdSessControlPlanIndepFlag
This variable indicates whether the local system
can continue to work while the control plane is out
of work. Specifically, it is set to true(1) if the
local system is independent of the control plane. Otherwise,
the va…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.13
h3cBfdSessAuthFlag
This variable indicates that the local system wants
to use Authentication. Specifically, it is set
to true(1) if the local system wishes the session
to be authenticated or false(2) if not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.14
h3cBfdSessDemandModeFlag
This variable indicates that the local system wants
to use Demand mode. Specifically, it is set
to true(1) if the local system wishes to use
Demand mode or false(2) if not
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.2011.10.2.72.1.3.1.15

h3cBfdSessStatTable

table
.1.3.6.1.4.1.2011.10.2.72.1.4 · 1 row entry · 5 columns
Open in standard view 
The table defines BFD session state.
h3cBfdSessStatEntry entry .1.3.6.1.4.1.2011.10.2.72.1.4.1
An entry in this table is created by a BFD-enabled node for
every BFD Session. It defines BFD session statistics.
Indexes
No indexes recorded
Column Syntax OID
h3cBfdSessStatPktInHC
The total number of BFD messages received by this BFD
session.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.72.1.4.1.1
h3cBfdSessStatPktOutHC
The total number of BFD messages sent by this BFD session.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.72.1.4.1.2
h3cBfdSessStatDownCount
The number of times this session has gone into the Down
state since the router last rebooted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.10.2.72.1.4.1.3
h3cBfdSessStatPktDiscard
The number of packets the local system has discarded
since the router last rebooted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.72.1.4.1.4
h3cBfdSessStatPktLost
The number of packets the local system has failed to transmit
since the router last rebooted.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.2011.10.2.72.1.4.1.5

h3cBfdSessPerfTable

table
.1.3.6.1.4.1.2011.10.2.72.1.5 · 1 row entry · 3 columns
Open in standard view 
The table defines BFD session performance.
h3cBfdSessPerfEntry entry .1.3.6.1.4.1.2011.10.2.72.1.5.1
An entry in this table is created by a BFD-enabled node for
every BFD session. It defines BFD Session performance.
Indexes
No indexes recorded
Column Syntax OID
h3cBfdSessPerfCreatTime
The value of sysUpTime when the session was created. If no such
create event exists this object contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2011.10.2.72.1.5.1.1
h3cBfdSessPerfLastUpTime
The value of sysUpTime when the last time communication was lost.
If no such up event exists this variable contains a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2011.10.2.72.1.5.1.2
h3cBfdSessPerfLastDownTime
The value of sysUpTime when the last time communication was lost
with the neighbor. If no such event exist this variable contains
a zero value.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.2011.10.2.72.1.5.1.3