h3cBfdSessAddrType

H3C-BFD-STD-MIB · .1.3.6.1.4.1.2011.10.2.72.1.3.1.8
MIB view Table view

Object

column INET-ADDRESS-MIBInetAddressType 
This object defines IP address type of the interface
associated with this BFD session.
              
Only values unknown(0), ipv4(1) or ipv6(2)
have to be supported.
              
A value of unknown(0) is allowed only when
the outgoing interface is of type point-to-point, or
when the BFD session is not associated with a specific
interface.
              
If any other unsupported values are attempted in a set
operation, the agent must return an inconsistentValue
error.

Context

MIB
H3C-BFD-STD-MIB
OID
.1.3.6.1.4.1.2011.10.2.72.1.3.1.8
Type
column
Access
readonly
Status
current
Parent
h3cBfdSessEntry
Table
h3cBfdSessTable
Siblings
14

Syntax

INET-ADDRESS-MIBInetAddressType
Source
INET-ADDRESS-MIBInetAddressType
Base type
Enumeration

Values & Constraints

Type Values
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
h3cBfdSessIndex
This variable contains an index which represents a unique BFD session on this device.
columnBfdSessIndexTC.1.3.6.1.4.1.2011.10.2.72.1.3.1.1
h3cBfdSessRemoteAddr
This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.72.1.3.1.10
h3cBfdSessLocalDiag
The BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value.
columnBfdDiag.1.3.6.1.4.1.2011.10.2.72.1.3.1.11
h3cBfdSessState
The state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one for tea…
columnEnumeration.1.3.6.1.4.1.2011.10.2.72.1.3.1.12
h3cBfdSessControlPlanIndepFlag
This variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local system is independent…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.72.1.3.1.13
h3cBfdSessAuthFlag
This variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(2…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.72.1.3.1.14
h3cBfdSessDemandModeFlag
This variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(2) if not
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2011.10.2.72.1.3.1.15
h3cBfdSessIfIndex
This variable contains an interface's index under which the BFD session runs.
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.2011.10.2.72.1.3.1.2
h3cBfdSessAppSupportId
This variable contains an ID used to indicate a local application which owns or maintains this BFD session. Note, a BFD session can support several route protocols. This is a bit-…
columnBits.1.3.6.1.4.1.2011.10.2.72.1.3.1.3
h3cBfdSessLocalDiscr
This variable defines the local discriminator for this BFD session, used to uniquely identify it.
columnUnsigned32.1.3.6.1.4.1.2011.10.2.72.1.3.1.4
h3cBfdSessRemoteDiscr
This variable defines the session discriminator chosen by the remote system for this BFD session.
columnUnsigned32.1.3.6.1.4.1.2011.10.2.72.1.3.1.5
h3cBfdSessDstPort
The UDP Port for BFD. The default value is the well-known value for this port.
columnINET-ADDRESS-MIBInetPortNumber.1.3.6.1.4.1.2011.10.2.72.1.3.1.6
h3cBfdSessOperMode
This variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In this …
columnEnumeration.1.3.6.1.4.1.2011.10.2.72.1.3.1.7
h3cBfdSessLocalAddr
This variable defines IP address of the local interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to …
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.2011.10.2.72.1.3.1.9