FutureL2tp-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
38

l2tpPortTable

table
.1.3.6.1.4.1.29601.2.108.1.2.1 · 1 row entry · 4 columns
Open in standard view 
This table is used for configuring the status of l2tp on a port. i.e enabled/disabled.
l2tpPortEntry entry .1.3.6.1.4.1.29601.2.108.1.2.1.1
This object specifies port-based administrator configurations of l2tp.
Indexes
l2tpPortIfIndex
Column Syntax OID
l2tpPortIfIndex
This object specifies the Index of the interface on which the l2tp configuration are made.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.108.1.2.1.1.1
l2tpEnabledStatus
This object specifies the status of l2tp on a particular port.
The status can be either enable or disable.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.108.1.2.1.1.2
l2tpPortEncapType
This object specifies the type of the packet to be traversed through the tunnel.
Encapsulation type can be (port based / port,vlan / QinQ /QinAny)

Port based - All the packet ingressed on this (port, atta…
Enumerationr/w
Enumerated Values:
1port
2port-vlan
3qinq
4qinAny
 .1.3.6.1.4.1.29601.2.108.1.2.1.1.3
l2tpPortRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.108.1.2.1.1.4

l2tpPseudowireTable

table
.1.3.6.1.4.1.29601.2.108.1.3.1 · 1 row entry · 9 columns
Open in standard view 
This table is used for configuring static tunnels between two LCCEs.
This table has information about the configured pseudowire class name, 
loopback interface ip, IPSec status, encapsulation mode fields.
l2tpPseudowireEntry entry .1.3.6.1.4.1.29601.2.108.1.3.1.1
This object specifies pseudowire class name, encapsulation mode, IPSec Status and Loopback interface
of every pseudowire that is configured by the user.
Indexes
l2tpPwIndex
Column Syntax OID
l2tpPwIndex
This object uniquely identifies the specified tunnel.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.1
l2tpPwEncapMode
This object specifies the mode in which the packets are encapsulated and de-capsulated i.e L2tp.
Enumeration
Enumerated Values:
1l2tpv3
2mpls
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.2
l2tpIPSecEnabledStatus
This object specifies the status of L2tpv3 over IPSec - enabled/disabled.
When enabled the packet processing will include encryption/decryption.
EnabledStatusr/w
Textual Convention: EnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.3
l2tpIPSecMode
This object specifies the IPSec mode.
Tunnel - IP header is also encrypted.
Transparent - IP header is not encrypted.
Enumeration
Enumerated Values:
1tunnel
2transparent
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.4
l2tpPwLoopBack
The object displays the loopback which the tunnel uses to encapsulate and de-capsulate the packet.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.5
l2tpRemoteIpAddress
The object specifies the remote IP address of the pseudowire
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.6
l2tpPwSrcMacAddr
The object indicates the source mac address that has to be matched with the packet
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.7
l2tpPwDestMacAddr
The object indicates the destination mac address that has to be matched with the packet
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.8
l2tpPwRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.108.1.3.1.1.9

l2tpSessionTable

table
.1.3.6.1.4.1.29601.2.108.1.4.1 · 1 row entry · 10 columns
Open in standard view 
This table is used for configuring static sessions between the tunnels.
This table has information about the configured remote end Id, session ID, peer session ID, 
cookie type, local cookie and remote cookie details .
l2tpSessionEntry entry .1.3.6.1.4.1.29601.2.108.1.4.1.1
This object indicates the remote end Id, local and remote cookie Id, cookie type, local and
remote cookie values of every session that is configured by the administrator.
Indexes
l2tpRemoteEndId
Column Syntax OID
l2tpRemoteEndId
This object specifies the remote end identifier of a session which is unique across a
particular connection (LCCE's sessions).
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.1
l2tpLocalSessionId
This object specifies the local session identifier.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.2
l2tpRemoteSessionId
This object specifies the remote session identifier.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.3
l2tpSessionPwIndex
This object specifies the Pseudo wire index of a particular tunnel that is to be used
for the virtual connection.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.4
l2tpSessionCookieSize
The cookie type which can be either 4 byte or 8 byte, Default value is none
when the cookiesize is configured as 4-byte, l2tpSessionLocalCookie and
l2tpSessionRemoteCookie will accept only 4 byte cookie-ID
when the coo…
Enumerationr/w
Enumerated Values:
1four-byte
2eight-byte
3none
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.5
l2tpSessionLocalCookie
This object specifies the Local cookie this is configured by the administrator based
on the size configured in l2tpSessionCookieSize.
OctetStringr/w .1.3.6.1.4.1.29601.2.108.1.4.1.1.6
l2tpSessionRemoteCookie
This object specifies the Remote cookie this is configured by the administrator based
on the size configured in l2tpSessionCookieSize.
OctetStringr/w .1.3.6.1.4.1.29601.2.108.1.4.1.1.7
l2tpSessionStatus
This object specifies the status of the particular session i.e up/down based on the
reachability of the destination IP network/address configured in the attachment-circuit
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.8
l2tpSessionClearStatistics
This object clear the statistics of this L2TP session .
- True - clears the statistics.
- False - Doesn't clear the statistics.By default it is set as ‘False’.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.9
l2tpSessionRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.108.1.4.1.1.10

l2tpXconnectTable

table
.1.3.6.1.4.1.29601.2.108.1.5.1 · 1 row entry · 6 columns
Open in standard view 
This table is used for configuring static AC to connect the pseudo wire to the respective 
sessions.This table has information about the peer destination IP, Remote End Id of the session,
Pseudowireclass name and encap type (port based / port,vlan / QinQ /QinAny)
l2tpXconnectEntry entry .1.3.6.1.4.1.29601.2.108.1.5.1.1
This object indicates the destination IP, Remote End Id of the session,Pseudowireclass name
and encap type (port based / port,vlan / QinQ /QinAny) of a particular xconnect.
Indexes
l2tpXconnectIfIndex l2tpXconnectId
Column Syntax OID
l2tpXconnectIfIndex
This object specifies the Index of the interface on which the Ac is configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.108.1.5.1.1.1
l2tpXconnectId
This object specifies the attachment circuit identifier.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.108.1.5.1.1.2
l2tpXconnectRemoteEndId
This object specifies the remote end Id of the session to be used for the virtual connection.
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.29601.2.108.1.5.1.1.3
l2tpXconnectInnerVlanId
This object specifies the Inner Vlan Id in which the AC is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.108.1.5.1.1.4
l2tpXconnectOuterVlanId
This object specifies the Outer Vlan Id in which the AC is configured.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.108.1.5.1.1.5
l2tpXconnectRowStatus
This object specifies the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.29601.2.108.1.5.1.1.6

l2tpSessionStatsTable

table
.1.3.6.1.4.1.29601.2.108.1.6.1 · 1 row entry · 5 columns
Open in standard view 
This table specifies information about the statistics of the configured sessions.
This table has the information about the total Tx & Rx packets, total packets encapsulated,
total packets decapsulated, total invalid packets received.
l2tpSessionStatsEntry entry .1.3.6.1.4.1.29601.2.108.1.6.1.1
This table specifies the information about the total Tx & Rx packets, total packets encapsulated,
total packets decapsulated, total invalid packets received in a particular
session/pesudowire class/xconnect
Indexes
l2tpSessionRemoteEndId
Column Syntax OID
l2tpSessionRemoteEndId
This object specifies the Remote End Identifier which is unique across the
connection (LCCE's sessions)
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.6.1.1.1
l2tpSessionStatsTotalEncap
This object specifies the total number of packets encapsulated in a particular session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.6.1.1.2
l2tpSessionStatsTotalDecap
This object specifies the total number of packets decapsulated in a particular session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.6.1.1.3
l2tpSessionStatsCookieMismatch
This object specifies the total number of packets with cookie mismatch that are
received on a particular session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.6.1.1.4
l2tpSessionStatsInvalidPeerIp
This object specifies the total number of packets with Invalid Ip Address that are
received on a particular encap session.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.6.1.1.5

l2tpPortStatsTable

table
.1.3.6.1.4.1.29601.2.108.1.7.1 · 1 row entry · 4 columns
Open in standard view 
This table specifies information about the statistics of a particular port.
This table contains port based packet drops information.
l2tpPortStatsEntry entry .1.3.6.1.4.1.29601.2.108.1.7.1.1
This table specifies the information on the statistics of packet drops in a particular port
Indexes
l2tpPortStatsIfIndex
Column Syntax OID
l2tpPortStatsIfIndex
This object specifies the Index of the interface on which the l2tp configuration are made.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.29601.2.108.1.7.1.1.1
l2tpPortStatsInvalidFrames
This object specifies the total packets with invalid frames like packets that does not belong
to any session etc that are received on a particular port.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.7.1.1.2
l2tpPortTotalTx
This object specifies the total number of packets transmitted via particular inteface .
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.7.1.1.3
l2tpPortTotalRx
This object specifies the total number of packets Received via particular inteface .
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.29601.2.108.1.7.1.1.4