FSS-ETHERNET-INTERFACE Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
26
.1.3.6.1.4.1.211.1.24.12.700.100.1 · 1 row entry · 26 columns
ethernet-dataEntry entry .1.3.6.1.4.1.211.1.24.12.700.100.1.1
Indexes
No indexes recorded
Column Syntax OID
ethernetAdmin-status Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.1
ethernetRate
Set rate - units kbps.
Unsigned32r/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.2
ethernetFec
Forward Error Correction Choices.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.3
ethernetLoopback
loopback operation and release
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.4
ethernetLocation
Set Loopback Location.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.5
ethernetType
Set Loopback type (or direction).
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.6
ethernetOper-status Enumeration .1.3.6.1.4.1.211.1.24.12.700.100.1.1.7
ethernetTestsignal
testsignal connect and disconnect
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.8
ethernetTestPattern
Set test signal pattern
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.9
ethernetTestsignal-type
Set test signal type (or direction).
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.10
ethernetBitErrors
bit errors for test signal in facility direction.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.11
ethernetBitErrorsTerminal
bit errors for test signal in terminal direction.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.12
ethernetSyncSeconds
number of seconds the received facility test signal is in sync.
String
Textual Convention: String OctetString
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.13
ethernetSyncSecondsTerminal
number of seconds the received terminal test signal is in sync.
String
Textual Convention: String OctetString
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.14
ethernetSpeed
Set speed of the interface, unit mbps.
This is for ETH facility.
Editable when not part of a LAG.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.15
ethernetDuplex
Set duplex selections.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.16
ethernetMtu
Set Maximum Frame Size.
Unsigned32r/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.17
ethernetAuto-negotiation
Set Auto Negotiation: Enabled/Disabled.
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.18
ethernetAct-laser
actual transmit laser status
Enumeration .1.3.6.1.4.1.211.1.24.12.700.100.1.1.19
ethernetTsf
Codeword to send during Transport Signal Failure
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.20
ethernetBtsf
Codeword to send during Backward Transport Signal Failure
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.21
ethernetLtxoff
LTXOFF Choices
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.22
ethernetDirection
direction Choices
Enumerationr/w .1.3.6.1.4.1.211.1.24.12.700.100.1.1.23
ethernetOper-duplex
Get duplex
String
Textual Convention: String OctetString
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.24
ethernetOper-speed
Get Speed
String
Textual Convention: String OctetString
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.25
ethernetWavelength
Wavelength
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.26