ethernetLocation
FSS-ETHERNET-INTERFACE ·
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.5
Object
column
r/w
Enumeration
Set Loopback Location.
Context
- MIB
- FSS-ETHERNET-INTERFACE
- OID
.1.3.6.1.4.1.211.1.24.12.700.100.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ethernet-dataEntry
- Table
- ethernet-dataTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ethernetAdmin-status | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.1 |
| ethernetTestsignal-type Set test signal type (or direction). | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.10 |
| ethernetBitErrors bit errors for test signal in facility direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.11 |
| ethernetBitErrorsTerminal bit errors for test signal in terminal direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.12 |
| ethernetSyncSeconds number of seconds the received facility test signal is in sync. | column | String | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.13 |
| ethernetSyncSecondsTerminal number of seconds the received terminal test signal is in sync. | column | String | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.14 |
| ethernetSpeed Set speed of the interface, unit mbps.
This is for ETH facility.
Editable when not part of a LAG. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.15 |
| ethernetDuplex Set duplex selections. | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.16 |
| ethernetMtu Set Maximum Frame Size. | column | Unsigned32 | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.17 |
| ethernetAuto-negotiation Set Auto Negotiation: Enabled/Disabled. | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.18 |
| ethernetAct-laser actual transmit laser status | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.19 |
| ethernetRate Set rate - units kbps. | column | Unsigned32 | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.2 |
| ethernetTsf Codeword to send during Transport Signal Failure | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.20 |
| ethernetBtsf Codeword to send during Backward Transport Signal Failure | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.21 |
| ethernetLtxoff LTXOFF Choices | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.22 |
| ethernetDirection direction Choices | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.23 |
| ethernetOper-duplex Get duplex | column | String | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.24 |
| ethernetOper-speed Get Speed | column | String | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.25 |
| ethernetWavelength Wavelength | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.26 |
| ethernetFec Forward Error Correction Choices. | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.3 |
| ethernetLoopback loopback operation and release | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.4 |
| ethernetType Set Loopback type (or direction). | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.6 |
| ethernetOper-status | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.7 |
| ethernetTestsignal testsignal connect and disconnect | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.8 |
| ethernetTestPattern Set test signal pattern | column | Enumeration | .1.3.6.1.4.1.211.1.24.12.700.100.1.1.9 |