FS-FRAME-RELAY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
109

fsfrLmiTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1 · 1 row entry · 13 columns
Open in standard view 
Table of Frame Relay LMI information that are
either supplemental to the frDlcmiTable of RFC 1315
or specific to FS's implementation.
fsfrLmiEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1
Each entry of the table contains information
of Frame Relay LMI over one physical interface.
They are mostly FR generic and some FS specific.
Indexes
No indexes recorded
Column Syntax OID
fsfrLmiLinkstatus
Data link status via LMI.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.1
fsfrLmiLinkType
Frame Relay link type.
Enumeration
Enumerated Values:
1dte
2dce
3nni
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.2
fsfrLmiEnquiryIns
Number of Status Enquiry messages received.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.3
fsfrLmiEnquiryOuts
Number of Status Enquiry messages sent.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.4
fsfrLmiStatusIns
Number of Status messages received.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.5
fsfrLmiStatusOuts
Number of Status messages sent.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.6
fsfrLmiUpdateStatusIns
Number of Update Status messages received.
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.7
fsfrLmiUpdateStatusOuts
Number of Update Status messages sent
messagesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.8
fsfrLmiStatusTimeouts
Number of times when timeout occurred on waiting
for Status message
timesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.9
fsfrLmiStatusEnqTimeouts
Number of times when timeout occurred on waiting
for Status Enquiry message
timesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.10
fsfrLmiN392Dce
LMI error threshold for DCE interface.
For DTE, value becomes 0.
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.11
fsfrLmiN393Dce
LMI monitored event count for DCE interface.
For DTE, value becomes zero (0).
Integer32
Constraints:
range: 0-10
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.12
fsfrLmiT392Dce
DCE polling verification timer for DCE interface
For DTE, the value becomes zero (0).
secondsInteger32
Constraints:
range: 0-30
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.1.1.1.13

fsfrCircuitTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.1 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive and statistics information
that are generic to Frame Relay virtual circuits.
fsfrCircuitEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.1.1
Each entry of the table contains information of a
circuit that are not included in frCircuitTable of
RFC1315 but are generic to Frame Relay.
Indexes
No indexes recorded
Column Syntax OID
fsfrCircuitDEins
Number of packets received with the Discarded
Eligibility indictor (the DE bit) set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.1.1.1
fsfrCircuitDEouts
Number of packets transmitted with DE bit set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.1.1.2
fsfrCircuitDropPktsOuts
Number of discarded packets that were to be sent.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.1.1.3
fsfrCircuitType
Basic circuit type
Enumeration
Enumerated Values:
1pvc
2svc
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.1.1.4

fsfrExtCircuitTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2 · 1 row entry · 30 columns
Open in standard view 
Table of FS implementation specific FR
circuit information. This is a FS extension
for the frCircuitTable of RFC 1315.
fsfrExtCircuitEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1
Each entry of the table contains information
of a Frame Relay virtual circuit that are specific
to FS implementation.
Indexes
No indexes recorded
Column Syntax OID
fsfrExtCircuitIfName
The textual name of the main interface or the
subinterface that this DLCI is associated with.
This is the same name string of an interface used
in the configuration and all console displays,
such as 'serial 0', 'serial…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.1
fsfrExtCircuitIfType
Type of the subinterface this DLCI is associated
with, if configured.
Enumeration
Enumerated Values:
1mainInterface
2pointToPoint
3multipoint
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.2
fsfrExtCircuitSubifIndex
For value greater than zero (0), it indicates
the network management interface index
for the subinterface associated with
this DLCI. Value 0 means the DLCI is not
associated with any subinterface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.3
fsfrExtCircuitMapStatus
The mapping protocols (internally considered as
the 'link type') applied on this circuit.
The value ranges from 0 to 2047.
For point-to-point DLCI, the value stays zero.
Otherwise, the value is a sum. It initially takes…
Integer32
Constraints:
range: 0-2047
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.4
fsfrExtCircuitCreateType
Identify the last source of the circuit's creation.
Enumeration
Enumerated Values:
1dynamic
2static
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.5
fsfrExtCircuitMulticast
Indicate if this DLCI is a multicast DLCI.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.6
fsfrExtCircuitRoutedDlci
The routed DLCI to pair up with this DLCI
for switching function. NOTE: Value zero (0)
indicates that there is no such routed DLCI
corresponding to this DLCI.
DlciNumber
Textual Convention: DlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.7
fsfrExtCircuitRoutedIf
The interface for the routed DLCI that pairs up
with this DLCI for switching. Value greater than 0
is the InterfaceIndex for that interface. Value
zero (0) indicates that there is no such routed DLCI
corresponding to th…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.8
fsfrExtCircuitUncompressIns
Number of inbound octets of the data packets,
accounted at Frame Relay level after FRF.9
payload decompression is applied. In the case of
non-FRF.9, this value could be identical to
frCircuitReceivedOctets, unless other…
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.9
fsfrExtCircuitUncompressOuts
Number of outbound octets of the data packets,
accounted at Frame Relay level before FRF.9
payload compression is applied. In the case of
non-FRF.9, this value could be identical to
frCircuitSentOctets, unless otherwise…
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.10
fsfrExtCircuitFECNOuts
Total number of frames sent out to the network
indicating forward congestion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.11
fsfrExtCircuitBECNOuts
Total number of frames sent out to the network
indicating backward congestion.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.12
fsfrExtCircuitMinThruputOut
Circuit's outgoing minimal Throughput based on
configuration.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.13
fsfrExtCircuitMinThruputIn
Circuit's incoming minimal Throughput based on
configuration.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.14
fsfrExtCircuitBcastPktOuts
Total number of broadcast packets sent out to the
network.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.15
fsfrExtCircuitBcastByteOuts
Total number of bytes sent out to the network in
broadcast packets.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.16
fsfrExtCircuitBandwidth
Bandwidth of the virtual circuit, acquired from
FS typed LMI Full Status message.
bits per secondInteger32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.17
fsfrExtCircuitShapeByteLimit
Maximum number of tokens a token bucket can hold in any
time interval in case of traffic shaping.
octetsInteger32
Constraints:
range: 125-2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.18
fsfrExtCircuitShapeInterval
Committed rate measurement interval.
millisecondsInteger32
Constraints:
range: 10-125
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.19
fsfrExtCircuitShapeByteIncrement
Number of tokens added into the token bucket per time
interval in case of traffic shaping.
octetsInteger32
Constraints:
range: 125-2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.20
fsfrExtCircuitShapePkts
Total number of packets that went through traffic
shaping.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.21
fsfrExtCircuitShapeBytes
Total number of bytes that went through traffic
shaping.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.22
fsfrExtCircuitShapePktsDelay
Total number of packets that were delayed by the
traffic shaper.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.23
fsfrExtCircuitShapeBytesDelay
Total number of bytes that were delayed by the
traffic shaper.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.24
fsfrExtCircuitShapeActive
Shows whether shaping is active or not.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.25
fsfrExtCircuitShapeAdapting
Type of Adaptive Shaping configured.
none(1) - No adaptive shaping configured
becn(2) - Backward Explicit Congestion Notification
foreSight(3) - ForeSight is the network traffic control
softwar…
Enumeration
Enumerated Values:
1none
2becn
3foreSight
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.26
fsfrExtCircuitTxDataRate
The average rate (bytes/second) at which data is
transmitted in this circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.27
fsfrExtCircuitTxPktRate
The average number of packets sent in a second in this
circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.28
fsfrExtCircuitRcvDataRate
The average rate (bytes/second) at which data is
received in this circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.29
fsfrExtCircuitRcvPktRate
The average number of packets received in a second in
this circuit.
Integer32
Constraints:
range: 1-45000000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.30

fsfrMapTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1 · 1 row entry · 10 columns
Open in standard view 
Table of protocols and addresses mapping
information of FR virtual circuit.
fsfrMapEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1
Each entry of the table contains one mapping
information of a Frame Relay virtual circuit.
Indexes
FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci fsfrMapIndex
Column Syntax OID
fsfrMapIndex
An arbitrary Index to the mapping information
associated with a certain circuit. The maximum
value is arbitrarily picked which is considered
sufficient for usual configuration.
Integer32
Constraints:
range: 1-999
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.1
fsfrMapProtocol
Mapping protocol for this circuit.
FSfrMapProtocols
Textual Convention: FSfrMapProtocols Enumeration
Type Values:
1arp
6serialArp
7ip
10xns
11novell
12apollo
13vines
16appletalk
18ieeeSpanning
22decnet
25clns
37rsrb
38bridge
39stun
40frArp
47uncompressedTcp
48compressedTcp
49llc2
53frSwitch
63dlsw
74nhrp
83compressedRtp
999wildcard
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.2
fsfrMapAddress
Mapping protocol address at remote end for
this DLCI.
NOTE: For point-to-point DLCI, the string is fixed
to be point-to-point.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.3
fsfrMapType
Type for the map creation.
Enumeration
Enumerated Values:
1static
2dynamic
3svc
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.4
fsfrMapEncaps
Indication of the encapsulation type for this
mapping protocol.
Enumeration
Enumerated Values:
1ietf
2cisco
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.5
fsfrMapBroadcast
Broadcast enabled or disabled.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.6
fsfrMapPayloadCompress deprecated
Indicate if payload compression is enabled.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.7
fsfrMapTcpHdrCompress
TCP header compression type, if applicable.
Enumeration
Enumerated Values:
1inapplicable
2passive
3active
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.8
fsfrMapRtpHdrCompress
RTP header compression type, if applicable.
The value 'passive' means that the header of an
outgoing RTP/IP packet is compressed only if an
incoming RTP/IP packet had a compressed header.
The value 'active' means the he…
Enumeration
Enumerated Values:
1inapplicable
2passive
3active
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.9
fsfrMapPayloadCompressType
FR payload compression type, if applicable.
FRF.9 is the Frame Relay Forum Implementation Agreement
on FR payload compression. The compression can be done
by either software or hardware (when equipped with the
supportin…
Enumeration
Enumerated Values:
1inapplicable
2cisco
3frf9Software
4frf9Hardware
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.3.1.1.10

fsfrSvcTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1 · 1 row entry · 8 columns
Open in standard view 
Table of FR SVC specific, descriptive
and statistics information.
fsfrSvcEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1
Each entry of the table contains circuit information
specific to a Frame Relay Switched Virtual Circuit.
Indexes
FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci
Column Syntax OID
fsfrSvcAddrLocal
Local E.164/X.125 address for the circuit.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.1
fsfrSvcAddrRemote
Remote E.164/X.125 address for the circuit.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.2
fsfrSvcThroughputIn
Circuit's incoming throughput. For outgoing
throughput (commonly referred to as CIR) see
frCircuitThroughput per RFC1315.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.3
fsfrSvcMinThruputOut deprecated
Circuit's outgoing minimal Throughput.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.4
fsfrSvcMinThruputIn deprecated
Circuit's incoming minimal Throughput.
bits per secondInteger32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.5
fsfrSvcCommitBurstIn
Circuit's incoming Committed Burst Rate.
See ANSI and/or ITU specifications for
definition and calculations. For outgoing
CBR, see frCircuitCommittedBurst per RFC 1315.
Integer32
Constraints:
range: 9600-1544000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.6
fsfrSvcExcessBurstIn
Circuit's incoming Excess Burst Rate.
See ANSI and/or ITU specifications for
definition and calculations. For outgoing
EBR, see frCircuitExcessBurst per RFC 1315.
Integer32
Constraints:
range: 9600-2440000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.7
fsfrSvcIdleTime
Circuit's idle time period. If expires, the
circuit is cleared.
secondsSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.4.1.1.8

fsfrElmiTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.5.2 · 1 row entry · 3 columns
Open in standard view 
Table of FS Frame Relay ELMI information that is
specific to FS implementation
fsfrElmiEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.2.1
Each entry of the table contains information about a
physical interface. The table can be accessible only
if the device supports ELMI protocol and if LMI is
enabled on the interface.
Indexes
IF-MIBifIndex
Column Syntax OID
fsfrElmiLinkStatus
This variable states whether Enhanced Link Management
Interface(ELMI) protocol is enabled or not on a
frame relay interface.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.2.1.1
fsfrElmiArStatus
This variable states whether the Enhanced Link
Management Interface(ELMI) address registration(AR)
mechanism is enabled or not on a frame relay
interface. A value of 1 indicates ELMI AR is
supported on the interface. …
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.2.1.2
fsfrElmiRemoteStatus
This variable states the Enhanced Link
Management(ELMI) status on the other end of the
interface. If cfrElmiLinkStatus is enabled on the
other end a value of 1 will be returned,
else 2 will be returned. This object doe…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.2.1.3

fsfrElmiNeighborTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3 · 1 row entry · 6 columns
Open in standard view 
Table of FS Frame Relay Neighbor ELMI information
that is specific to FS implementation.
fsfrElmiNeighborEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1
Each entry of the table contains information of the
neighboring device connected to a physical interface.
The entry will be present only if ELMI is enabled on
the neighboring device interface. If the value of the
fsfrEl…
Indexes
IF-MIBifIndex
Column Syntax OID
fsfrElmiNeighborArStatus
This variable indicates the status of ELMI Address
registration(AR) on the neighboring device. A value
of 1 indicates ELMI AR is not supported on the
neighboring device. A value of 2 indicates ELMI AR is
enabled on t…
Enumeration
Enumerated Values:
1notsupported
2enabled
3disabled
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1.1
fsfrElmiNeighborIpAddress
The Management IP address of the neighboring device
to which the other end of this interface is
connected. Network management system can use this
address to send management messages to the device.
If address registrat…
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1.2
fsfrElmiNeighborIfIndex
The Interface index of the neighboring device to
which this interface is connected. If the value of
fsfrElmiNeighborArStatus is 2 then this will have a
valid value. If the value of fsfrElmiNeighborArStatus
is 3 or 1 th…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1.3
fsfrElmiNeighborVendorName
Vendor name of the neighboring device to which the
other end of this interface is connected.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1.4
fsfrElmiNeighborPlatformName
Platform name of the neighboring device to which the
other end of this interface is connected.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1.5
fsfrElmiNeighborDeviceName
Device name of the neighboring device to which the
other end of this interface is connected.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.5.3.1.6

fsfrFragTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1 · 1 row entry · 21 columns
Open in standard view 
Table of Frame Relay Fragmentation information. 
These are specific to FS's implementation.
fsfrFragEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1
Each entry of the table contains details of
fragmentation configured on this circuit.
Indexes
FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci
Column Syntax OID
fsfrFragSize
fsfrFragSize defines the payload size of a fragment
and it excludes the FR headers and any FR fragmentation
header.
octetsInteger32
Constraints:
range: 16-1600
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.1
fsfrFragType
Fragmentation type configured by the user. The types
supported are end-to-end, VoFR-fs and VoFR.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.2
fsfrFragInPkts
Total number of frames received that have a
fragmentation header.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.3
fsfrFragOutPkts
Total number of fragments that are transmitted with a
fragmenation header.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.4
fsfrFragInOctets
Total number of bytes received in frames that have a
fragmentation header. The number of bytes include the
FR header.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.5
fsfrFragOutOctets
Total number of bytes that are transmitted in frames
with a fragmenation header. The number of bytes also
includes the FR header.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.6
fsfrFragNotInPkts
Total number of frames received that do not require
reassembly and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation type is set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.7
fsfrFragNotOutPkts
Total number of frames transmitted without fragmenting
and therefore will not contain the fragmentation header.
This counter is valid only when end-to-end fragmentation
type is set.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.8
fsfrFragNotInOctets
Total number of bytes received in frames that do not
require reassembly and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation type is set.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.9
fsfrFragNotOutOctets
Total number of bytes transmitted in frames that are
not fragmented and therefore will not contain the
fragmentation header. This counter is valid only when
end-to-end fragmentation type is set.
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.10
fsfrFragAssembledInPkts
Total number of fully reassembled frames. It also
counts the number of packets received without FR
fragmentation header (i.e. in un-fragmentated pkts).
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.11
fsfrFragAssembledInOctets
Total number of bytes received in fully reassembled
frames. It also counts the number of packets received
without FR fragmentation header (i.e.in un-fragmentated
pkts).
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.12
fsfrFragPreOutPkts
Total number of frames fragmented and trasmitted. It
also counts the number of packets trasmitted without FR
fragmentation header (i.e. in un-fragmentated pkts).
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.13
fsfrFragPreOutOctets
Total number of bytes transmitted in fragmented frames.
It also counts the number of bytes trasmitted in frames
without FR fragmentation header (i.e. in un-fragmentated
pkts).
octetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.14
fsfrFragDroppedReAssembledInPkts
Number of received fragments dropped for reasons such
as : running out of memory, receiving segments out of
sequence, receiving an unexpected frame with a B bit
set, timing out on a reassembling frame.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.15
fsfrFragDroppedFragmentedOutPkts
Number of fragments dropped because of running
out of memory.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.16
fsfrFragTimeoutsIn
Number of reassemble timer timeouts for this circuit.
A frame requiring more than two minutes to fully
reassemble is dropped and timeout will be incremented
by one.
Integer32
Constraints:
range: 0-1000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.17
fsfrFragOutOfSeqFragPkts
Indicates the total number of packets received with an
unexpected sequence number. All fragments being
reassembled are dropped. Start a new packet with the
received segment only if the B bit is set on the
segment. Oth…
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.18
fsfrFragUnexpectedBBitSetPkts
Number of fragments received in this circuit with
a B bit set. All fragments being reassembled are dropped
and a new packet is started with this segment.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.19
fsfrFragSeqMissedPkts
Number of fragments received in this circuit with
skipped sequence number.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.20
fsfrFragInterleavedOutPkts
Number of packets that have been interleaved between
segments.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.6.1.1.21

fsfrConnectionTable

table
.1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1 · 1 row entry · 14 columns
Open in standard view 
Table of Frame Relay/Frame Relay and Frame Relay/ATM
Network/Service Interworking connection information. 
These are specific to FS's implementation.
fsfrConnectionEntry entry .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1
Each entry of the table contains information of a
connection that is established for Frame Relay/Frame
Relay and Frame Relay/ATM Network/Service Interworking.
Indexes
FRAME-RELAY-DTE-MIBfrCircuitIfIndex FRAME-RELAY-DTE-MIBfrCircuitDlci
Column Syntax OID
fsfrConnName
The textual name of a for FR/FR or FR/ATM
Network/Service Interworking connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.1
fsfrConnID
The numerical identifier of a FR/FR or FR/ATM
Network/Service Interworking connection.
Integer32
Constraints:
range: 1-2000
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.2
fsfrConnState
Status of a FR/FR or FR/ATM Network/Service
Interworking connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.3
fsfrConnSegment1Name
The textual name used to identify the first segment of
a FR/FR or FR/ATM Network/Service Interworking
connection.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.4
fsfrConnSegment1VCGroup
The textual name used to identify the VC-Group in the
first segment of a Frame Relay/ATM Network Interworking
(FRF.5)connection.
This field is not applicabe in case of,
FRF.8 (Frame Relay/ATM Service Interwo…
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.5
fsfrConnSegment1Dlci
The DLCI used as the first segment of a FR-FR or FR-ATM
Network/Service Interworking connection.
DlciNumber
Textual Convention: DlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.6
fsfrConnSegment2Name
The interface on which second segment of a FR-FR or
FR-ATM Network/Service Interworking connection is
configured.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.7
fsfrConnSegment2Vpi
The value of VPI, in the ATM connection, used as the
second segment of a FR-ATM Network/Service Interworking
connection. In case of FR-FR connection, the same will
be used to display the DLCI used as the second segme…
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.8
fsfrConnSegment2Vci
The value of VCI, in the ATM connection, used as the
second segment of a FR-ATM Network/Service Interworking
connection. In case of FR-FR connection, this is not
supported.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.9
fsfrConnServiceTranslation
Shows whether Service Translation Mode is supported or
not. Translation Mode is the interworking of
internetworking (routed and/or bridged) protocols used
in FR-ATM Service PVC Interworking(FRF.8).
This is not suppor…
Enumeration
Enumerated Values:
1serviceTranslationEnabled
2serviceTranslationNotEnabled
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.10
fsfrConnFrSscsDlci
The DLCI value used at the FR-SSCS layer. This is one of
connection multiplexing methods used in Frame Relay/ATM
Network Interworking.
Not supported in case of FRF.8 (FR-ATM Service PVC
Interworking) and FR-FR connec…
DlciNumber
Textual Convention: DlciNumber Integer32
Type Constraints:
range: 0..1023
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.11
fsfrConnEfciBit
Shows whether the FECN field in the FR frame is mapped
to the ATM EFCI field of every cell generated out of the
FR frame. This is used to indicate congestion in FR to
ATM direction in case of Frame Relay/ATM Service …
Enumeration
Enumerated Values:
1mapFecn
2notMapFecn
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.12
fsfrConnDeBit
The method of operation for loss priority mapping in the
B-ISDN to FR direction..
Not supported in case of FR-FR connection.
Enumeration
Enumerated Values:
1noMapClp
2mapClp
3setDe0
4setDe1
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.13
fsfrConnClpBit
The method of operation used to map loss priority
mapping in the FR to ATM direction.
Not supported in case of FR-FR connection.
Enumeration
Enumerated Values:
1setClpTo0AndCopyDeToFrsscsDe
2setClpTo1AndCopyDeToFrsscsDe
3copyDeToFrsscsDeAndClp
4copyDeToClp
5setClp1
6setClp0
 .1.3.6.1.4.1.52642.1.1.10.2.50.1.7.1.1.14