fsfrExtCircuitShapeActive

FS-FRAME-RELAY-MIB · .1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.25
MIB view Table view

Object

column SNMPv2-TCTruthValue 
Shows whether shaping is active or not.

Context

MIB
FS-FRAME-RELAY-MIB
OID
.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.25
Type
column
Access
readonly
Status
current
Parent
fsfrExtCircuitEntry
Table
fsfrExtCircuitTable
Siblings
29

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsfrExtCircuitIfName
The textual name of the main interface or the subinterface that this DLCI is associated with. This is the same name string of an interface used in the configuration and all conso…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.1
fsfrExtCircuitUncompressOuts
Number of outbound octets of the data packets, accounted at Frame Relay level before FRF.9 payload compression is applied. In the case of non-FRF.9, this value could be identical …
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.10
fsfrExtCircuitFECNOuts
Total number of frames sent out to the network indicating forward congestion.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.11
fsfrExtCircuitBECNOuts
Total number of frames sent out to the network indicating backward congestion.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.12
fsfrExtCircuitMinThruputOut
Circuit's outgoing minimal Throughput based on configuration.
columnbits per second Integer32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.13
fsfrExtCircuitMinThruputIn
Circuit's incoming minimal Throughput based on configuration.
columnbits per second Integer32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.14
fsfrExtCircuitBcastPktOuts
Total number of broadcast packets sent out to the network.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.15
fsfrExtCircuitBcastByteOuts
Total number of bytes sent out to the network in broadcast packets.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.16
fsfrExtCircuitBandwidth
Bandwidth of the virtual circuit, acquired from FS typed LMI Full Status message.
columnbits per second Integer32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.17
fsfrExtCircuitShapeByteLimit
Maximum number of tokens a token bucket can hold in any time interval in case of traffic shaping.
columnoctets Integer32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.18
fsfrExtCircuitShapeInterval
Committed rate measurement interval.
columnmilliseconds Integer32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.19
fsfrExtCircuitIfType
Type of the subinterface this DLCI is associated with, if configured.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.2
fsfrExtCircuitShapeByteIncrement
Number of tokens added into the token bucket per time interval in case of traffic shaping.
columnoctets Integer32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.20
fsfrExtCircuitShapePkts
Total number of packets that went through traffic shaping.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.21
fsfrExtCircuitShapeBytes
Total number of bytes that went through traffic shaping.
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.22
fsfrExtCircuitShapePktsDelay
Total number of packets that were delayed by the traffic shaper.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.23
fsfrExtCircuitShapeBytesDelay
Total number of bytes that were delayed by the traffic shaper.
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.24
fsfrExtCircuitShapeAdapting
Type of Adaptive Shaping configured. none(1) - No adaptive shaping configured becn(2) - Backward Explicit Congestion Notification foreSight(3) - ForeSight is the network…
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.26
fsfrExtCircuitTxDataRate
The average rate (bytes/second) at which data is transmitted in this circuit.
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.27
fsfrExtCircuitTxPktRate
The average number of packets sent in a second in this circuit.
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.28
fsfrExtCircuitRcvDataRate
The average rate (bytes/second) at which data is received in this circuit.
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.29
fsfrExtCircuitSubifIndex
For value greater than zero (0), it indicates the network management interface index for the subinterface associated with this DLCI. Value 0 means the DLCI is not associated with …
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.3
fsfrExtCircuitRcvPktRate
The average number of packets received in a second in this circuit.
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.30
fsfrExtCircuitMapStatus
The mapping protocols (internally considered as the 'link type') applied on this circuit. The value ranges from 0 to 2047. For point-to-point DLCI, the value stays zero. Otherwise…
columnInteger32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.4
fsfrExtCircuitCreateType
Identify the last source of the circuit's creation.
columnEnumeration.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.5
fsfrExtCircuitMulticast
Indicate if this DLCI is a multicast DLCI.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.6
fsfrExtCircuitRoutedDlci
The routed DLCI to pair up with this DLCI for switching function. NOTE: Value zero (0) indicates that there is no such routed DLCI corresponding to this DLCI.
columnDlciNumber.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.7
fsfrExtCircuitRoutedIf
The interface for the routed DLCI that pairs up with this DLCI for switching. Value greater than 0 is the InterfaceIndex for that interface. Value zero (0) indicates that there is…
columnIF-MIBInterfaceIndex.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.8
fsfrExtCircuitUncompressIns
Number of inbound octets of the data packets, accounted at Frame Relay level after FRF.9 payload decompression is applied. In the case of non-FRF.9, this value could be identical …
columnoctets SNMPv2-SMICounter32.1.3.6.1.4.1.52642.1.1.10.2.50.1.2.2.1.9