FS-FIBER-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
92
fsFiberTable
table.1.3.6.1.4.1.52642.1.1.10.2.105.1.1
·
1 row entry
·
85 columns
A table for getting Fiber Module information
Entry of a Fiber Module information.
Indexes
fsFiberPortIndex
| Column | Syntax | OID | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
fsFiberPortIndex
Port index of the port.
|
FS-TCIfIndex Textual Convention: FS-TCIfIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.1 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberPortDescr
Discription of the port.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransceiverType
Transceiver type of the Fiber module insered into the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.3 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberConnectorType
Connector type of the Fiber module insered into the port.
If the transceiver type of Fiber module is unknown(1), then this object contains a zero value. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.4 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberWavelength
The value of wavelength of the Fiber module insered into the port.
If the transceiver type of Fiber module is either fiber100CopperSFP(7) or fiber1000CopperSFP(13) (or fiber10GCopperSFPPlus(14), or fiber10GCopperXFP(… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.5 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistanceSMF
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using sin… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.6 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistance62point5umOM1
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 62.… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.7 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistance62point5um
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 62.… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.8 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistance50umOM2
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.9 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistance50um
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.10 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistance50umOM3
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 50 … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.11 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistanceEBW50um
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using 200… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.12 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistanceCopper
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using cop… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.13 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTransferDistanceCableAssembly
The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length of the Cable assembly passive. The value is in units of meters. A value of zero means that the transceiver … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.14 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberDDMSupportStatus
This object indicates that whether the Digital Diagnostic Monitors is implemeted.
|
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.15 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberSerialNumber
The serial number of the Fiber module insered into the port.
|
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.16 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTemp
The temperature of the Fiber module insered into the port.
The value is in units of degrees Celsius. If the fsFiberDDMSupportStatus is false, the temperature value is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.17 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTempStatus
The status ok(2) indicates that the temperature of the Fiber module is in
the normal level. The status warning(3) indicates that the temperature of the Fiber module exceeds high warning level or is below low warning le… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.18 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberVoltage
The voltage of the Fiber module insered into the port.
The value is in units of mVolts. If the fsFiberDDMSupportStatus is false, the voltage value is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.19 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberVoltageStatus
The status ok(2) indicates that the voltage of the Fiber module is in
the normal level. The status warning(3) indicates that the voltage of the Fiber module exceeds high warning level or is below low warning level. Th… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.20 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberBias
The bias of the Fiber module insered into the port.
The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the bias value is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.21 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberBiasStatus
The status ok(2) indicates that the bias of the Fiber module is in
the normal level. The status warning(3) indicates that the bias of the Fiber module exceeds high warning level or is below low warning level. The stat… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.22 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1Bias
The bias in Channel 1 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 1 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.23 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1BiasStatus
The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 1 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.24 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2Bias
The bias in Channel 2 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 2 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.25 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2BiasStatus
The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 2 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.26 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3Bias
The bias in Channel 3 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 3 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.27 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3BiasStatus
The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 3 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.28 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4Bias
The bias in Channel 4 of the QSFP+ Fiber module insered into the port.
The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the bias value in Channel 4 is 0. |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.29 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4BiasStatus
The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the bias in the Channel 4 exceeds high warning level or is below low warning level. The s… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.30 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberRXpowerIntegerpart
The integer part of Rx power of the Fiber module insered into the port.
The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of Rx… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.31 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberRXpowerDecimalpart
The decimal part of Rx power of the Fiber module insered into the port.
The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the decimal part of Rx… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.32 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberRXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3). If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP (or not QSF… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.33 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberRXpowerStatus
The status ok(2) indicates that the Rx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Rx power of the Fiber module exceeds high warning level or is below low warning level. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.34 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1RXpowerIntegerpart
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.35 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1RXpowerDecimalpart
The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.36 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 1 of QSFP+. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.37 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 1 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.38 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2RXpowerIntegerpart
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.39 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2RXpowerDecimalpart
The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.40 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 2 of QSFP+. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.41 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 2 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.42 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3RXpowerIntegerpart
The integer part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.43 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3RXpowerDecimalpart
The decimal part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.44 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 3 of QSFP+. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.45 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 3 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.46 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4RXpowerIntegerpart
The integer part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.47 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4RXpowerDecimalpart
The decimal part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.48 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4RXpowertype
The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 4 of QSFP+. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.49 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4RXpowerStatus
The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the Rx power in the Channel 4 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.50 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTXpowerIntegerpart
The integer part of Tx power of the Fiber module insered into the port.
The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of Tx… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.51 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTXpowerDecimalpart
The decimal part of Tx power of the Fiber module insered into the port.
The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the decimal part of Tx… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.52 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTXpowerStatus
The status ok(2) indicates that the Tx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Tx power of the Fiber module exceeds high warning level or is below low warning level. … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.53 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1TXpowerIntegerpart
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.54 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1TXpowerDecimalpart
The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.55 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 1 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.56 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2TXpowerIntegerpart
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.57 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2TXpowerDecimalpart
The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.58 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 2 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.59 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3TXpowerIntegerpart
The integer part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.60 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3TXpowerDecimalpart
The decimal part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.61 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 3 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.62 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4TXpowerIntegerpart
The integer part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.63 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4TXpowerDecimalpart
The decimal part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the decimal part … |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.64 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4TXpowerStatus
The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that the Tx power in the Channel 4 exceeds high warning level or is below low warning leve… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.65 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberRXpowerSign
The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.66 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1RXpowerSign
The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.67 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2RXpowerSign
The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.68 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3RXpowerSign
The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.69 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4RXpowerSign
The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.70 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTXpowerSign
The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.71 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1TXpowerSign
The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.72 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2TXpowerSign
The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.73 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3TXpowerSign
The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.74 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4TXpowerSign
The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0.
|
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.75 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberRXpowerInteger
The integer of Rx power of the Fiber module insered into the port.
The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part of Rx… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.76 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1RXpowerInteger
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.77 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2RXpowerInteger
The integer part of Rx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.78 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3RXpowerInteger
The integer part of Rx power in Channel 3 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.79 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4RXpowerInteger
The integer part of Rx power in Channel 4 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.80 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberTXpowerInteger
The integer part of Tx power of the Fiber module inserted into the port.
The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the integer part… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.81 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel1TXpowerInteger
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.82 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel2TXpowerInteger
The integer part of Tx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.83 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel3TXpowerInteger
The integer part of Tx power in Channel 3 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.84 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
fsFiberChannel4TXpowerInteger
The integer part of Tx power in Channel 4 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm. If the fsFiberDDMSupportStatus is false or the Fiber module type is not QSFP+, the integer… |
Integer32 Textual Convention: COPS-PR-SPPIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.85 |
fsFiberVendorTable
table.1.3.6.1.4.1.52642.1.1.10.2.105.1.2
·
1 row entry
·
7 columns
A table of Vendor info entries.
Entry contains Vendor info.
Indexes
fsFiberVendorPortIndex
| Column | Syntax | OID |
|---|---|---|
|
fsFiberVendorPortIndex
The port index of Vendor info .
|
FS-TCIfIndex Textual Convention: FS-TCIfIndex Integer32Type Constraints: range: 1..2147483647 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.1 |
|
fsFiberVendorName
The description of vendor name.
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.2 |
|
fsFiberVendorOUI
Added by Observium developers
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.3 |
|
fsFiberVendorPN
Added by Observium developers
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.4 |
|
fsFiberVendorRev
Added by Observium developers
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.5 |
|
fsFiberVendorDate
Added by Observium developers
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.6 |
|
fsFiberVendorEncoding
Added by Observium developers
|
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.52642.1.1.10.2.105.1.2.1.7 |