fsFiberBias
FS-FIBER-MIB ·
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.21
Object
column
Integer32
The bias of the Fiber module insered into the port. The value is in units of uA. If the fsFiberDDMSupportStatus is false or the Fiber module type is neither SFP/SFP+ nor XFP, the bias value is 0.
Context
- MIB
- FS-FIBER-MIB
- OID
.1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsFiberEntry
- Table
- fsFiberTable
- Siblings
- 84
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsFiberPortIndex Port index of the port. | column | FS-TCIfIndex | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.1 |
| fsFiberTransferDistance50um The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.10 |
| fsFiberTransferDistance50umOM3 The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.11 |
| fsFiberTransferDistanceEBW50um The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.12 |
| fsFiberTransferDistanceCopper The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.13 |
| fsFiberTransferDistanceCableAssembly The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length of the Cable assembly passive.
The value is in units of meters.
A v… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.14 |
| fsFiberDDMSupportStatus This object indicates that whether the Digital Diagnostic Monitors is implemeted. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.15 |
| fsFiberSerialNumber The serial number of the Fiber module insered into the port. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.16 |
| fsFiberTemp The temperature of the Fiber module insered into the port.
The value is in units of degrees Celsius.
If the fsFiberDDMSupportStatus is false, the temperature value is 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.17 |
| fsFiberTempStatus The status ok(2) indicates that the temperature of the Fiber module is in
the normal level. The status warning(3) indicates that the temperature of
the Fiber module exceeds high … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.18 |
| fsFiberVoltage The voltage of the Fiber module insered into the port.
The value is in units of mVolts.
If the fsFiberDDMSupportStatus is false, the voltage value is 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.19 |
| fsFiberPortDescr Discription of the port. | column | OctetString | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.2 |
| fsFiberVoltageStatus The status ok(2) indicates that the voltage of the Fiber module is in
the normal level. The status warning(3) indicates that the voltage of
the Fiber module exceeds high warning … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.20 |
| fsFiberBiasStatus The status ok(2) indicates that the bias of the Fiber module is in
the normal level. The status warning(3) indicates that the bias of
the Fiber module exceeds high warning level … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.22 |
| fsFiberChannel1Bias The bias in Channel 1 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
not QSFP+,… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.23 |
| fsFiberChannel1BiasStatus The status ok(2) indicates that the bias in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 1 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.24 |
| fsFiberChannel2Bias The bias in Channel 2 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
not QSFP+,… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.25 |
| fsFiberChannel2BiasStatus The status ok(2) indicates that the bias in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 2 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.26 |
| fsFiberChannel3Bias The bias in Channel 3 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
not QSFP+,… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.27 |
| fsFiberChannel3BiasStatus The status ok(2) indicates that the bias in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 3 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.28 |
| fsFiberChannel4Bias The bias in Channel 4 of the QSFP+ Fiber module insered into the port.
The value is in units of uA.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
not QSFP+,… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.29 |
| fsFiberTransceiverType Transceiver type of the Fiber module insered into the port. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.3 |
| fsFiberChannel4BiasStatus The status ok(2) indicates that the bias in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates
that the bias in the Channel 4 exceeds high warning lev… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.30 |
| fsFiberRXpowerIntegerpart The integer part of Rx power of the Fiber module insered into the port.
The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
neither … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.31 |
| fsFiberRXpowerDecimalpart The decimal part of Rx power of the Fiber module insered into the port.
The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
neither … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.32 |
| fsFiberRXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3).
If the fsFiberDDMSupportStatus is false or the Fiber module type … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.33 |
| fsFiberRXpowerStatus The status ok(2) indicates that the Rx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Rx power of
the Fiber module exceeds high warnin… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.34 |
| fsFiberChannel1RXpowerIntegerpart The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.35 |
| fsFiberChannel1RXpowerDecimalpart The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.36 |
| fsFiberChannel1RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 1 of QSFP+.
If the fsFiberDDMSupportStatus is false or … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.37 |
| fsFiberChannel1RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 1 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.38 |
| fsFiberChannel2RXpowerIntegerpart The integer part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.39 |
| fsFiberConnectorType Connector type of the Fiber module insered into the port.
If the transceiver type of Fiber module is unknown(1), then this
object contains a zero value. | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.4 |
| fsFiberChannel2RXpowerDecimalpart The decimal part of Rx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.40 |
| fsFiberChannel2RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 2 of QSFP+.
If the fsFiberDDMSupportStatus is false or … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.41 |
| fsFiberChannel2RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 2 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.42 |
| fsFiberChannel3RXpowerIntegerpart The integer part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.43 |
| fsFiberChannel3RXpowerDecimalpart The decimal part of Rx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.44 |
| fsFiberChannel3RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 3 of QSFP+.
If the fsFiberDDMSupportStatus is false or … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.45 |
| fsFiberChannel3RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 3 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.46 |
| fsFiberChannel4RXpowerIntegerpart The integer part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.47 |
| fsFiberChannel4RXpowerDecimalpart The decimal part of Rx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.48 |
| fsFiberChannel4RXpowertype The value indicates whether the received power measurement
represents average input optical power(2) or oma(3) in Channel 4 of QSFP+.
If the fsFiberDDMSupportStatus is false or … | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.49 |
| fsFiberWavelength The value of wavelength of the Fiber module insered into the port.
If the transceiver type of Fiber module is either fiber100CopperSFP(7)
or fiber1000CopperSFP(13) (or fiber10GC… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.5 |
| fsFiberChannel4RXpowerStatus The status ok(2) indicates that the Rx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Rx power in the Channel 4 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.50 |
| fsFiberTXpowerIntegerpart The integer part of Tx power of the Fiber module insered into the port.
The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
neither … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.51 |
| fsFiberTXpowerDecimalpart The decimal part of Tx power of the Fiber module insered into the port.
The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
neither … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.52 |
| fsFiberTXpowerStatus The status ok(2) indicates that the Tx power of the Fiber module is in
the normal level. The status warning(3) indicates that the Tx power of
the Fiber module exceeds high warnin… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.53 |
| fsFiberChannel1TXpowerIntegerpart The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.54 |
| fsFiberChannel1TXpowerDecimalpart The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.55 |
| fsFiberChannel1TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 1 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 1 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.56 |
| fsFiberChannel2TXpowerIntegerpart The integer part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.57 |
| fsFiberChannel2TXpowerDecimalpart The decimal part of Tx power in Channel 1 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.58 |
| fsFiberChannel2TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 2 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 2 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.59 |
| fsFiberTransferDistanceSMF The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.6 |
| fsFiberChannel3TXpowerIntegerpart The integer part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.60 |
| fsFiberChannel3TXpowerDecimalpart The decimal part of Tx power in Channel 3 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.61 |
| fsFiberChannel3TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 3 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 3 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.62 |
| fsFiberChannel4TXpowerIntegerpart The integer part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.63 |
| fsFiberChannel4TXpowerDecimalpart The decimal part of Tx power in Channel 4 of the QSFP+
Fiber module insered into the port. The value is in units of dbm.
If the fsFiberDDMSupportStatus is false or the Fiber modu… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.64 |
| fsFiberChannel4TXpowerStatus The status ok(2) indicates that the Tx power in the Channel 4 of QSFP+ is in
the normal level. The status warning(3) indicates that
the Tx power in the Channel 4 exceeds high war… | column | Enumeration | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.65 |
| fsFiberRXpowerSign The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.66 |
| fsFiberChannel1RXpowerSign The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.67 |
| fsFiberChannel2RXpowerSign The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.68 |
| fsFiberChannel3RXpowerSign The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.69 |
| fsFiberTransferDistance62point5umOM1 The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.7 |
| fsFiberChannel4RXpowerSign The sign (-1) indicates that the Rx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.70 |
| fsFiberTXpowerSign The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.71 |
| fsFiberChannel1TXpowerSign The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.72 |
| fsFiberChannel2TXpowerSign The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.73 |
| fsFiberChannel3TXpowerSign The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.74 |
| fsFiberChannel4TXpowerSign The sign (-1) indicates that the Tx power value is lower than 0, while sign (1) is higher than 0. | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.75 |
| fsFiberRXpowerInteger The integer of Rx power of the Fiber module insered into the port.
The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
neither … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.76 |
| fsFiberChannel1RXpowerInteger The integer part of Rx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.77 |
| fsFiberChannel2RXpowerInteger The integer part of Rx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.78 |
| fsFiberChannel3RXpowerInteger The integer part of Rx power in Channel 3 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.79 |
| fsFiberTransferDistance62point5um The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.8 |
| fsFiberChannel4RXpowerInteger The integer part of Rx power in Channel 4 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.80 |
| fsFiberTXpowerInteger The integer part of Tx power of the Fiber module inserted into the port.
The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fiber module type is
ne… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.81 |
| fsFiberChannel1TXpowerInteger The integer part of Tx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.82 |
| fsFiberChannel2TXpowerInteger The integer part of Tx power in Channel 1 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.83 |
| fsFiberChannel3TXpowerInteger The integer part of Tx power in Channel 3 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.84 |
| fsFiberChannel4TXpowerInteger The integer part of Tx power in Channel 4 of the QSFP+
Fiber module inserted into the port. The value is in units of 0.01 dbm.
If the fsFiberDDMSupportStatus is false or the Fibe… | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.85 |
| fsFiberTransferDistance50umOM2 The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance … | column | Integer32 | .1.3.6.1.4.1.52642.1.1.10.2.105.1.1.1.9 |