FOUNDRY-SN-IP-VRRP-MIB Table View

The IP port of this VRRP interface.

The authentication type of this interface.

The simple text password is allowed if only if
the snVrrpIfAuthType type is simpleTextPasswd(1).

The received Header error counts in this interface.

The received authentication type error counts in this interface.

The received authentication password mismatched error counts in this interface.

The received unfound VRID error counts in this interface.

The IP port of this VRRP interface.

One of the virtual router ID of this VRRP interface.

The ownership of this VRRP router interface
can be set either owner(1) or backup(2).
VirRtr SNMP-GET returns incomplete(0), it means
no IP address has assigned to this VRRP router interface.

The higher the number the higher the priority is.
This parameter decides which backup router should becomes
the Active Router for the interface. A backup Router with
higher priority selected to becomes the Active Route…

The higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtrCurrPriority
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
c…

The higher the number the higher the priority is.
This object will be adjusted dynamically with the
track priority when the Track Port states first
changes from UP to DOWN.

Time interval between advertisements (seconds).

Dead interval (seconds).

This mode controls whether a higher priority Backup router
preempts a lower priority Master. The mode with enabled(1)
allow preemption and disabled(0) prohibit preemption.

This object specifies the VRRP Router's interface state as:
init(0)...initialization state.
master(1)...master state.
backup(2)...backup state.

This object specifies the VRRP Router's activate command as:
disabled(0)...deactivate this VRRP Router.
enabled(1)....activate this VRRP Router.

The numbers of IP Addresses of this virtual router of this interface.

This object specifies the identity of the physical port
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this interfac…

This object specifies the identity of the virtual interface
whose state is to be monitored. Each bit is a port of
the system. Default value is 0. VirRtr this object is configured
then the Preference Level of this int…

This object is used to create and
delete row in the table and control
if they are used. The values
that can be written are:
delete(3)...deletes the row
create(4)...creates a new row
modify(5)...modifies an existing row
…

The received VRRP ARP Packet Drop Counts.

The received VRRP IP Packet Drop Counts.

The received VRRP Port mismatching Counts.

The received VRRP Number of IP Addresses mismatching Counts.

The received VRRP IP Address mismatching Counts.

The counts of the virtual router interface with hello interval mismatch counts.

The counts of the virtual router interface with Priority zero from the master.

The counts of the virtual router interface with higher Priority.

The counts of the virtual router interface transition to master state.

The counts of the virtual router interface transition to backup state.

Current Dead interval (in 100 milliseconds).

This object specifies the identity of the physical port
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. 8-bit is the slot
number, the other 8-bit is the port number. Default val…

This object specifies the identity of the virtual interface
whose state is to be monitored. Each port index is a
16-bit integer in big endian order. Default value
is 0 length octet string. If this object is configur…