snVrrpVirRtr2TrackPriority

FOUNDRY-SN-IP-VRRP-MIB · .1.3.6.1.4.1.1991.1.2.12.5.1.1.4
MIB view Table view

Object

column r/w Integer32 
The higher the number the higher the priority is.
after this object is configured, the snVrrpVirRtr2CurrPriority 
of this interface will be adjusted dynamically with this
track priority when the Track Port states first
changes from UP to DOWN.

Context

MIB
FOUNDRY-SN-IP-VRRP-MIB
OID
.1.3.6.1.4.1.1991.1.2.12.5.1.1.4
Type
column
Access
readwrite
Status
current
Parent
snVrrpVirRtr2Entry
Table
snVrrpVirRtr2Table
Siblings
28

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snVrrpVirRtr2Id
One of the virtual router ID of this Vrrp and Vrrpe interface.
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.1
snVrrpVirRtr2IpAddrMask
The numbers of IP Addresses of this virtual router of this interface.
columnOctetString.1.3.6.1.4.1.1991.1.2.12.5.1.1.10
snVrrpVirRtr2Activate
This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe Routers.
columnEnumeration.1.3.6.1.4.1.1991.1.2.12.5.1.1.11
snVrrpVirRtr2BackupInt
Time interval between backup routers hello message advertisements (seconds).
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.12
snVrrpVirRtr2RowStatus
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new r…
columnEnumeration.1.3.6.1.4.1.1991.1.2.12.5.1.1.13
snVrrpVirRtr2RxArpPktDropCnts
The received Vrrp and Vrrpe ARP Packet Drop Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.14
snVrrpVirRtr2RxIpPktDropCnts
The received Vrrp and Vrrpe IP Packet Drop Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.15
snVrrpVirRtr2RxPortMismatchCnts
The received Vrrp and Vrrpe Port mismatching Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.16
snVrrpVirRtr2RxNumOfIpMismatchCnts
The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.17
snVrrpVirRtr2RxIpMismatchCnts
The received Vrrp and Vrrpe IP Address mismatching Counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.18
snVrrpVirRtr2RxHelloIntMismatchCnts
The counts of the virtual router interface with hello interval mismatch counts.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.19
snVrrpVirRtr2Ownership
The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp ro…
columnEnumeration.1.3.6.1.4.1.1991.1.2.12.5.1.1.2
snVrrpVirRtr2RxPriorityZeroFromMasterCnts
The counts of the virtual router interface with Priority zero from the master.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.20
snVrrpVirRtr2RxHigherPriorityCnts
The counts of the virtual router interface with higher Priority.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.21
snVrrpVirRtr2TransToMasterStateCnts
The counts of the virtual router interface transition to master state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.22
snVrrpVirRtr2TransToBackupStateCnts
The counts of the virtual router interface transition to backup state.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1991.1.2.12.5.1.1.23
snVrrpVirRtr2CurrDeadInt
Current Dead interval (in 100 milliseconds).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.24
snVrrpVirRtr2TrackPortList
This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifInd…
columnOctetString.1.3.6.1.4.1.1991.1.2.12.5.1.1.25
snVrrpVirRtr2AdvertiseBackup
Set Advertise this backup router to master
columnEnumeration.1.3.6.1.4.1.1991.1.2.12.5.1.1.26
snVrrpVirRtr2MasterIpAddr
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.1991.1.2.12.5.1.1.27
snVrrpVirRtr2IpAddrCount
The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/…
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.28
snVrrpVirRtr2VirtualMacAddr
The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obtainable by a manageme…
columnMacAddress.1.3.6.1.4.1.1991.1.2.12.5.1.1.29
snVrrpVirRtr2CfgPriority
This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not s…
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.3
snVrrpVirRtr2CurrPriority
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.5
snVrrpVirRtr2HelloInt
Time interval between advertisements (seconds).
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.6
snVrrpVirRtr2DeadInt
Dead interval (seconds).
columnInteger32.1.3.6.1.4.1.1991.1.2.12.5.1.1.7
snVrrpVirRtr2PreemptMode
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption.
columnEnumeration.1.3.6.1.4.1.1991.1.2.12.5.1.1.8
snVrrpVirRtr2State
This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state.
columnEnumeration.1.3.6.1.4.1.1991.1.2.12.5.1.1.9