FDRY-MPLS-L2VPN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
33

fdryVllEndPointTable

table
.1.3.6.1.4.1.1991.1.2.15.2.1.1 · 1 row entry · 11 columns
Open in standard view 
This table specifies information about the VLL and VLL-local endpoints which are not
available in the PW tables.
fdryVllEndPointEntry entry .1.3.6.1.4.1.1991.1.2.15.2.1.1.1
A row in this table represents a VLL or VLL-local end point for a
pseudo-wire (PW) virtual connection across a packet network.
For a VLL, we would have one instance of this table for a given PW.
For a VLL-local, there …
Indexes
fdryVllEndPointServiceType FOUNDRY-PW-STD-MIBpwIndex FOUNDRY-PW-ENET-STD-MIBpwEnetPwInstance
Column Syntax OID
fdryVllEndPointServiceType
A service type indicating VLL or VLL-local service for this endpoint.
The value vpls(3) is not used in this table.
MplsServiceType
Textual Convention: MplsServiceType Enumeration
Type Values:
1vll
2vllLocal
3vpls
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.1
fdryVllEndPointVlanTagMode
This value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.
FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagModer/w
Textual Convention: FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagMode Enumeration
Type Values:
1tagged
2untagged
3dual
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.2
fdryVllEndPointClassOfService
This value indicates the Class Of Service for this endpoint.
For VLL, this value is used to select the appropriate tunnel
whose COS value is either same, or almost approaching this value.
For VLL-local, this value is ap…
ClassOfServicer/w
Textual Convention: ClassOfService Unsigned32
Type Constraints:
range: 0..7
range: 255
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.3
fdryVllEndPointInHCPkts
This value indicates the number of packets ingressing into this endpoint.
This counter is not supported in CES/CER platform.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.4
fdryVllEndPointOutHCPkts
This value indicates the number of packets egressing out from this endpoint.
For VLL-local, this value could be the fdryVllEndPointInHCPkts of the other endpoint
of this VLL instance. But since rate limit could be appli…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.5
fdryVllEndPointAdminStatus
The desired administrative status of this endpoint. This object MAY
be set at any time.
AdminStatusr/w
Textual Convention: AdminStatus Enumeration
Type Values:
1up
2down
3testing
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.6
fdryVllEndPointOperStatus
This object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this table
FOUNDRY-PW-TC-STD-MIBPwOperStatusTC
Textual Convention: FOUNDRY-PW-TC-STD-MIBPwOperStatusTC Enumeration
Type Values:
1up
2down
3testing
4dormant
5notPresent
6lowerLayerDown
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.7
fdryVllEndPointRowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object, and the fdryVllEndPointAdminStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.8
fdryVllEndPointInnerVlanId
This value indicates the inner vlan id for this endpoint.
Returns 0 if not configured or is not supported.
FOUNDRY-PW-TC-STD-MIBPwVlanCfgr/w
Textual Convention: FOUNDRY-PW-TC-STD-MIBPwVlanCfg Unsigned32
Type Constraints:
range: 0..4097
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.9
fdryVllEndPointInHCOctets
This value indicates the number of octets ingressing into this endpoint
from a Customer Edge (CE) device.
This counter is supported in CES/CER platform.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.10
fdryVllEndPointOutHCOctets
This value indicates the number of octets egressing out from this endpoint towards
the Customer Edge (CE) device.
This counter is not supported in CES/CER platform.
Within CES/CER, any packet coming in from the tunne…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.11

fdryVplsEndPointTable

table deprecated
.1.3.6.1.4.1.1991.1.2.15.2.2.1 · 1 row entry · 9 columns
Open in standard view 
This table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib.
fdryVplsEndPointEntry entry .1.3.6.1.4.1.1991.1.2.15.2.2.1.1
A row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows wit…
Indexes
VPLS-GENERIC-DRAFT-01-MIBvplsConfigIndex fdryVplsEndPointPortVlan fdryVplsEndPointIfIndex
Column Syntax OID
fdryVplsEndPointPortVlan deprecated
This value specifies the VLAN id value of this endpoint.
FOUNDRY-PW-TC-STD-MIBPwVlanCfg
Textual Convention: FOUNDRY-PW-TC-STD-MIBPwVlanCfg Unsigned32
Type Constraints:
range: 0..4097
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.1
fdryVplsEndPointIfIndex deprecated
This value specifies the ifIndex value of this endpoint.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.2
fdryVplsEndPointVlanTagMode deprecated
This value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.
FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagModer/w
Textual Convention: FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagMode Enumeration
Type Values:
1tagged
2untagged
3dual
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.3
fdryVplsEndPointOutHCPkts deprecated
This counter indicates the number of packets egressing
out from this endpoint towards the Customer Edge (CE).
This value counts packets coming from multiple pseudo-wires
towards the endpoint, as well as locally switche…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.4
fdryVplsEndPointState deprecated
A L2 state of this VPLS endpoint.
Enumeration
Enumerated Values:
1disabled
2blocking
5forwarding
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.5
fdryVplsEndPointAdminStatus deprecated
The desired administrative status of this endpoint. This object MAY
be set at any time.
AdminStatusr/w
Textual Convention: AdminStatus Enumeration
Type Values:
1up
2down
3testing
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.6
fdryVplsEndPointOperStatus deprecated
This object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this table
FOUNDRY-PW-TC-STD-MIBPwOperStatusTC
Textual Convention: FOUNDRY-PW-TC-STD-MIBPwOperStatusTC Enumeration
Type Values:
1up
2down
3testing
4dormant
5notPresent
6lowerLayerDown
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.7
fdryVplsEndPointRowStatus deprecated
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object and the fdryVplsEndPointAdminStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.8
fdryVplsEndPointInHCOctets deprecated
This counter indicates the number of octets ingressing
into this endpoint from the Customer Edge (CE).
This object is supported in CES/CER only.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.2.1.1.9

fdryVplsTable

table
.1.3.6.1.4.1.1991.1.2.15.2.2.2 · 1 row entry · 4 columns
Open in standard view 
This table specifies additional information about the VPLS instance configuration
which is not available in the VplsConfigTable. Some of these
objects are configuration specific, some are commands specific 
to that VPLS instance.
fdryVplsEntry entry .1.3.6.1.4.1.1991.1.2.15.2.2.2.1
A row in this table represents a VPLS instance. It augments
the vplsConfigTable in the VPLS draft mib.
Indexes
No indexes recorded
Column Syntax OID
fdryVplsClassOfService
This value indicates the Class Of Service for this VPLS instance.
This value is used to select the appropriate tunnel
whose COS value is either same, or almost approaching this value.
ClassOfServicer/w
Textual Convention: ClassOfService Unsigned32
Type Constraints:
range: 0..7
range: 255
 .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.1
fdryVplsMaxMacLearned
This value indicates the maximum number of MAC addresses
that can be learned by this VPLS instance.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.2
fdryVplsClearMac
The Set value of TRUE tells the system to clear all the MAC addresses
learned by this VPLS instance. Setting value of FALSE will return an error.
During read operations, value FALSE will be returned at all times.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.3
fdryVplsVcId
The VPLS Instance ID of a given VPLS session.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.15.2.2.2.1.4

fdryVplsEndPoint2Table

table
.1.3.6.1.4.1.1991.1.2.15.2.2.3 · 1 row entry · 9 columns
Open in standard view 
This table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib.
  This table deprecates fdryVplsEndPointTable, as inner VLAN and ISID
has been added as index to this table.
fdryVplsEndPoint2Entry entry .1.3.6.1.4.1.1991.1.2.15.2.2.3.1
A row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows wit…
Indexes
VPLS-GENERIC-DRAFT-01-MIBvplsConfigIndex fdryVplsEndPoint2VlanId fdryVplsEndPoint2InnerTagType fdryVplsEndPoint2InnerTag fdryVplsEndPoint2IfIndex
Column Syntax OID
fdryVplsEndPoint2VlanId
This value specifies the VLAN id value of this endpoint.
FOUNDRY-PW-TC-STD-MIBPwVlanCfg
Textual Convention: FOUNDRY-PW-TC-STD-MIBPwVlanCfg Unsigned32
Type Constraints:
range: 0..4097
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.1
fdryVplsEndPoint2InnerTagType
This value indicates the inner id for this endpoint.
If no inner tag is specified, value invalid(1) is returned.
Enumeration
Enumerated Values:
1invalid
2innerVlan
3isid
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.2
fdryVplsEndPoint2InnerTag
This value indicates the inner tag for this endpoint.
If the index fdryVplsEndPoint2InnerTagType has
value isid(3), then this object will have the
ISID value for that endpoint. Valid ISID value
is between 256 (0x100…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.3
fdryVplsEndPoint2IfIndex
This value specifies the ifIndex value of this endpoint.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.4
fdryVplsEndPoint2VlanTagMode
This value indicates the vlan mode for this endpoint. The values,
dual(3) and other(4) is not used in this table.
FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagModer/w
Textual Convention: FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagMode Enumeration
Type Values:
1tagged
2untagged
3dual
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.5
fdryVplsEndPoint2InHCOctets
This counter indicates the number of octets ingressing
into this endpoint from the Customer Edge (CE).
This object is supported in CES/CER only.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.6
fdryVplsEndPoint2Layer2State
The L2 state of this VPLS endpoint.
Layer2StateTC
Textual Convention: Layer2StateTC Enumeration
Type Values:
1disabled
2blocking
3listening
4learning
5preforwarding
6forwarding
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.7
fdryVplsEndPoint2OperStatus
This object indicates the operational status of this endpoint.
Only values up(1), down(2) are used in this table
FOUNDRY-PW-TC-STD-MIBPwOperStatusTC
Textual Convention: FOUNDRY-PW-TC-STD-MIBPwOperStatusTC Enumeration
Type Values:
1up
2down
3testing
4dormant
5notPresent
6lowerLayerDown
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.8
fdryVplsEndPoint2RowStatus
This variable is used to create, modify, and/or
delete a row in this table. When a row in this
table is in active(1) state, no objects in that row
can be modified except this object.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.1991.1.2.15.2.2.3.1.9