fdryVllEndPointOutHCPkts

FDRY-MPLS-L2VPN-MIB · .1.3.6.1.4.1.1991.1.2.15.2.1.1.1.5
MIB view Table view

Object

column SNMPv2-SMICounter64 
This value indicates the number of packets egressing out from this endpoint.
For VLL-local, this value could be the fdryVllEndPointInHCPkts of the other endpoint
of this VLL instance. But since rate limit could be applied to the incoming packet,
the count value will not be accurate. Due to this, the value will be 0 for VLL-local.
  This counter is not supported in CES/CER platform.

Context

MIB
FDRY-MPLS-L2VPN-MIB
OID
.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.5
Type
column
Access
readonly
Status
current
Parent
fdryVllEndPointEntry
Table
fdryVllEndPointTable
Siblings
10

Syntax

SNMPv2-SMICounter64
Source
SNMPv2-SMICounter64
Base type
Unsigned64

Values & Constraints

Type Constraints
range: 0..18446744073709551615

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fdryVllEndPointServiceType
A service type indicating VLL or VLL-local service for this endpoint. The value vpls(3) is not used in this table.
columnMplsServiceType.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.1
fdryVllEndPointInHCOctets
This value indicates the number of octets ingressing into this endpoint from a Customer Edge (CE) device. This counter is supported in CES/CER platform.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.10
fdryVllEndPointOutHCOctets
This value indicates the number of octets egressing out from this endpoint towards the Customer Edge (CE) device. This counter is not supported in CES/CER platform. Within CES/…
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.11
fdryVllEndPointVlanTagMode
This value indicates the vlan mode for this endpoint. The values, dual(3) and other(4) is not used in this table.
columnFOUNDRY-SN-SWITCH-GROUP-MIBVlanTagMode.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.2
fdryVllEndPointClassOfService
This value indicates the Class Of Service for this endpoint. For VLL, this value is used to select the appropriate tunnel whose COS value is either same, or almost approaching thi…
columnClassOfService.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.3
fdryVllEndPointInHCPkts
This value indicates the number of packets ingressing into this endpoint. This counter is not supported in CES/CER platform.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.4
fdryVllEndPointAdminStatus
The desired administrative status of this endpoint. This object MAY be set at any time.
columnAdminStatus.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.6
fdryVllEndPointOperStatus
This object indicates the operational status of this endpoint. Only values up(1), down(2) are used in this table
columnFOUNDRY-PW-TC-STD-MIBPwOperStatusTC.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.7
fdryVllEndPointRowStatus
This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this obje…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.8
fdryVllEndPointInnerVlanId
This value indicates the inner vlan id for this endpoint. Returns 0 if not configured or is not supported.
columnFOUNDRY-PW-TC-STD-MIBPwVlanCfg.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.9