F3-AMP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
2
Rows
2
Columns
45
f3AmpConfigTable
table.1.3.6.1.4.1.2544.1.12.24.1.1
·
1 row entry
·
31 columns
A list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes.
A conceptual row in the f3AmpConfigTable.
Indexes
f3AmpConfigIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
f3AmpConfigIndex
An integer index value used to uniquely identify
this AMP Config within the System. |
Integer32 Constraints: range: 1-255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.1 |
||||||||||||
|
f3AmpConfigRole
Configures AMP instance to be either Client or Server.
|
AMPRoler/w Textual Convention: AMPRole EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.2 |
||||||||||||
|
f3AmpConfigProtocol
Configures protocol over which AMP message will be transported.
|
AMPProtocolr/w Textual Convention: AMPProtocol EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.3 |
||||||||||||
|
f3AmpConfigEnabled
Enables or Disables AMP on a Port.
|
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.4 |
||||||||||||
|
f3AmpConfigPort
Port on which AMP Server or Client will operate. This port will
transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex or c… |
SNMPv2-TCVariablePointerr/w Textual Convention: SNMPv2-TCVariablePointer ObjectIdentifier |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.5 |
||||||||||||
|
f3AmpConfigStatus
The Status of AMP.
|
AMPStatus Textual Convention: AMPStatus EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.6 |
||||||||||||
|
f3AmpConfigRemSysName
When f3AmpConfigRole is 'server' this object specifies sysName which is sent
in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the sysName val… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.7 |
||||||||||||
|
f3AmpConfigRemSysIpAddr
When f3AmpConfigRole is 'server' this object specifies System IP address
which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the … |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.8 |
||||||||||||
|
f3AmpConfigRemSysIpMask
When f3AmpConfigRole is 'server' this object specifies System IP mask
which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Sy… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.9 |
||||||||||||
|
f3AmpConfigRemSysDefGateway
When f3AmpConfigRole is 'server' this object specifies System Default Gateway
which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.10 |
||||||||||||
|
f3AmpConfigRemSysSNMPV1IfName
When f3AmpConfigRole is 'server' this object specifies
System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object shows the Syste… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.11 |
||||||||||||
|
f3AmpConfigRemSysSrcIpAddrType
When f3AmpConfigRole is 'server' this object specifies System Source IP Address
type which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only … |
CM-IP-MIBIpSourceAddrType Textual Convention: CM-IP-MIBIpSourceAddrType EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.12 |
||||||||||||
|
f3AmpConfigRemSysSrcIpAddrIfName
When f3AmpConfigRole is 'server' this object specifies System Source IP
Interface name sent in an AMP message to be configured on an AMP Client device. When f3AmpConfigRole is 'client' this object shows the SystemSourc… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.13 |
||||||||||||
|
f3AmpConfigRemTunnelIndex
When f3AmpConfigRole is 'server' this object specifies
index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only a… |
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.14 |
||||||||||||
|
f3AmpConfigRemTunnelName
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and s… |
SNMPv2-TCDisplayStringr/w Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.15 |
||||||||||||
|
f3AmpConfigRemTunnelType
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only… |
CM-IP-MIBIpManagementTunnelTyper/w Textual Convention: CM-IP-MIBIpManagementTunnelType EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.16 |
||||||||||||
|
f3AmpConfigRemTunnelIpAddr
When f3AmpConfigRole is 'server' this object specifies
IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-o… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.17 |
||||||||||||
|
f3AmpConfigRemTunnelIpMask
When f3AmpConfigRole is 'server' this object specifies
IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only… |
SNMPv2-SMIIpAddressr/w Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.18 |
||||||||||||
|
f3AmpConfigRemTunnelVlanId
When f3AmpConfigRole is 'server' this object specifies
VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only … |
CM-COMMON-MIBVlanIdr/w Textual Convention: CM-COMMON-MIBVlanId Integer32Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.19 |
||||||||||||
|
f3AmpConfigRemTunnelSVlanId
When f3AmpConfigRole is 'server' this object specifies
S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read… |
CM-COMMON-MIBVlanIdr/w Textual Convention: CM-COMMON-MIBVlanId Integer32Type Constraints: range: 0..4095 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.20 |
||||||||||||
|
f3AmpConfigRemTunnelSVlanIdEnabled
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this obje… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.21 |
||||||||||||
|
f3AmpConfigRemTunnelRip2PktsEnabled
When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this ob… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.22 |
||||||||||||
|
f3AmpConfigRemTunnelCOS
When f3AmpConfigRole is 'server' this object specifies
COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.23 |
||||||||||||
|
f3AmpConfigRemTunnelCIR
When f3AmpConfigRole is 'server' this object specifies
CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.24 |
||||||||||||
|
f3AmpConfigRemTunnelEIR
When f3AmpConfigRole is 'server' this object specifies
EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.25 |
||||||||||||
|
f3AmpConfigRemTunnelBufferSize
When f3AmpConfigRole is 'server' this object specifies
Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.26 |
||||||||||||
|
f3AmpConfigRemTunnelEncapType
When f3AmpConfigRole is 'server' this object specifies
Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object i… |
CM-IP-MIBIpManagementTunnelEncapsulationTyper/w Textual Convention: CM-IP-MIBIpManagementTunnelEncapsulationType EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.27 |
||||||||||||
|
f3AmpConfigRemTunnelMtu
When f3AmpConfigRole is 'server' this object specifies
MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.2544.1.12.24.1.1.1.28 |
||||||||||||
|
f3AmpConfigAction
This object may be used to initiate user action on this AMP Config instance.
|
AMPConfigActionr/w Textual Convention: AMPConfigAction EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.29 |
||||||||||||
|
f3AmpConfigStorageType
The type of storage configured for this entry.
|
SNMPv2-TCStorageTyper/w Textual Convention: SNMPv2-TCStorageType EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.30 |
||||||||||||
|
f3AmpConfigRowStatus
The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The value… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.1.1.1.31 |
f3AmpStatsTable
table.1.3.6.1.4.1.2544.1.12.24.2.1
·
1 row entry
·
14 columns
A list of entries corresponding to Automatic Management Provisioning Statistics
A conceptual row in the f3AmpStatsTable.
Indexes
f3AmpConfigIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
f3AmpStatsProvDataTx
The number of Provisioning Data messages sent by AMP Server.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.1 |
||||||||||||||
|
f3AmpStatsProvDataRx
The number of Provisioning Data messages received by AMP Client.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.2 |
||||||||||||||
|
f3AmpStatsProvRequestTx
The number of Provisioning Request messages sent by AMP Client.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.3 |
||||||||||||||
|
f3AmpStatsProvRequestRx
The number of Provisioning Request received sent by AMP Server.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.4 |
||||||||||||||
|
f3AmpStatsConfigSuccessTx
The number of Configuration Success messages sent sent by AMP Client.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.5 |
||||||||||||||
|
f3AmpStatsConfigSuccessRx
The number of Configuration Success messages received by AMP Server.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.6 |
||||||||||||||
|
f3AmpStatsConfigFailTx
The number of Configuration Success messages received by AMP Client.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.7 |
||||||||||||||
|
f3AmpStatsConfigFailRx
The number of Configuration Success messages received by AMP Server.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.8 |
||||||||||||||
|
f3AmpStatsSpuriousMessageRx
The number of Spurious messages received by AMP Client or Server
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.9 |
||||||||||||||
|
f3AmpStatsTimeoutRx
The number of messages which were not received within the time out value.
AMP Client can time out while waiting for Prov Data message. AMP Server can time out while waiting for Config Fail or Config Success message. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.10 |
||||||||||||||
|
f3AmpStatsLastRxStatus
Last received Configuration Status.
|
AMPConfigStatus Textual Convention: AMPConfigStatus EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.2.1.1.11 |
||||||||||||||
|
f3AmpStatsRxTimeStamp
Time of last received Configuration Status.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.12 |
||||||||||||||
|
f3AmpStatsLastTxStatus
Last sent Configuration Status.
|
AMPConfigStatus Textual Convention: AMPConfigStatus EnumerationType Values:
|
.1.3.6.1.4.1.2544.1.12.24.2.1.1.13 |
||||||||||||||
|
f3AmpStatsTxTimeStamp
Time of last sent Configuration Status.
|
SNMPv2-TCDateAndTime Textual Convention: SNMPv2-TCDateAndTime OctetStringType Constraints: range: 8range: 11 |
.1.3.6.1.4.1.2544.1.12.24.2.1.1.14 |