f3AmpConfigProtocol
F3-AMP-MIB ·
.1.3.6.1.4.1.2544.1.12.24.1.1.1.3
Object
column
r/w
AMPProtocol
Configures protocol over which AMP message will be transported.
Context
- MIB
- F3-AMP-MIB
- OID
.1.3.6.1.4.1.2544.1.12.24.1.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- f3AmpConfigEntry
- Table
- f3AmpConfigTable
- Siblings
- 30
Syntax
AMPProtocol
- Source
- AMPProtocol
- Base type
Enumeration
Values & Constraints
Type Values
1 | efmOam |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3AmpConfigIndex An integer index value used to uniquely identify
this AMP Config within the System. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.1 |
| f3AmpConfigRemSysDefGateway When f3AmpConfigRole is 'server' this object specifies System Default Gateway
which is sent in a AMP message to be configfured on a AMP Client device.
When f3AmpConfigRole is 'cl… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.24.1.1.1.10 |
| f3AmpConfigRemSysSNMPV1IfName When f3AmpConfigRole is 'server' this object specifies
System SNMPV1 Interface Name which is sent
in a AMP message to be configfured on a AMP Client device.
When f3AmpConfigRole … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.24.1.1.1.11 |
| f3AmpConfigRemSysSrcIpAddrType When f3AmpConfigRole is 'server' this object specifies System Source IP Address
type which is sent in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRo… | column | CM-IP-MIBIpSourceAddrType | .1.3.6.1.4.1.2544.1.12.24.1.1.1.12 |
| f3AmpConfigRemSysSrcIpAddrIfName When f3AmpConfigRole is 'server' this object specifies System Source IP
Interface name sent in an AMP message to be configured on an AMP Client device.
When f3AmpConfigRole is 'cl… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.24.1.1.1.13 |
| f3AmpConfigRemTunnelIndex When f3AmpConfigRole is 'server' this object specifies
index of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRol… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.14 |
| f3AmpConfigRemTunnelName When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel name which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRole is… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.24.1.1.1.15 |
| f3AmpConfigRemTunnelType When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel type value which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigR… | column | CM-IP-MIBIpManagementTunnelType | .1.3.6.1.4.1.2544.1.12.24.1.1.1.16 |
| f3AmpConfigRemTunnelIpAddr When f3AmpConfigRole is 'server' this object specifies
IP Address of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConf… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.24.1.1.1.17 |
| f3AmpConfigRemTunnelIpMask When f3AmpConfigRole is 'server' this object specifies
IP Mask of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigR… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.24.1.1.1.18 |
| f3AmpConfigRemTunnelVlanId When f3AmpConfigRole is 'server' this object specifies
VlanId of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRo… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.24.1.1.1.19 |
| f3AmpConfigRole Configures AMP instance to be either Client or Server. | column | AMPRole | .1.3.6.1.4.1.2544.1.12.24.1.1.1.2 |
| f3AmpConfigRemTunnelSVlanId When f3AmpConfigRole is 'server' this object specifies
S-TAG VlanId of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpCo… | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.24.1.1.1.20 |
| f3AmpConfigRemTunnelSVlanIdEnabled When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel S-TAG VlanId Enable value which is sent
in an AMP message to be configfured on an AMP Client device.
Wh… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.24.1.1.1.21 |
| f3AmpConfigRemTunnelRip2PktsEnabled When f3AmpConfigRole is 'server' this object specifies
a Management Tunnel RIP2 Packates Enabled value which is sent
in an AMP message to be configfured on an AMP Client device.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.24.1.1.1.22 |
| f3AmpConfigRemTunnelCOS When f3AmpConfigRole is 'server' this object specifies
COS of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRole … | column | Integer32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.23 |
| f3AmpConfigRemTunnelCIR When f3AmpConfigRole is 'server' this object specifies
CIR of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRole … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.24 |
| f3AmpConfigRemTunnelEIR When f3AmpConfigRole is 'server' this object specifies
EIR of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRole … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.25 |
| f3AmpConfigRemTunnelBufferSize When f3AmpConfigRole is 'server' this object specifies
Buffer Size of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpCon… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.26 |
| f3AmpConfigRemTunnelEncapType When f3AmpConfigRole is 'server' this object specifies
Encapsulation Type of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f… | column | CM-IP-MIBIpManagementTunnelEncapsulationType | .1.3.6.1.4.1.2544.1.12.24.1.1.1.27 |
| f3AmpConfigRemTunnelMtu When f3AmpConfigRole is 'server' this object specifies
MTU of a Management Tunnel which is sent
in an AMP message to be configfured on an AMP Client device.
When f3AmpConfigRole … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.24.1.1.1.28 |
| f3AmpConfigAction This object may be used to initiate user action on this AMP Config instance. | column | AMPConfigAction | .1.3.6.1.4.1.2544.1.12.24.1.1.1.29 |
| f3AmpConfigStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.24.1.1.1.30 |
| f3AmpConfigRowStatus The status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.24.1.1.1.31 |
| f3AmpConfigEnabled Enables or Disables AMP on a Port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.24.1.1.1.4 |
| f3AmpConfigPort Port on which AMP Server or Client will operate. This port will
transmit/receive AMP messages. The AMP can operate on Access Ports and
Network Port and f3AmpConfigPort shall poin… | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.24.1.1.1.5 |
| f3AmpConfigStatus The Status of AMP. | column | AMPStatus | .1.3.6.1.4.1.2544.1.12.24.1.1.1.6 |
| f3AmpConfigRemSysName When f3AmpConfigRole is 'server' this object specifies sysName which is sent
in a AMP message to be configfured on a AMP Client device.
When f3AmpConfigRole is 'client' this objec… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.24.1.1.1.7 |
| f3AmpConfigRemSysIpAddr When f3AmpConfigRole is 'server' this object specifies System IP address
which is sent in a AMP message to be configfured on a AMP Client device.
When f3AmpConfigRole is 'client'… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.24.1.1.1.8 |
| f3AmpConfigRemSysIpMask When f3AmpConfigRole is 'server' this object specifies System IP mask
which is sent in a AMP message to be configfured on a AMP Client device.
When f3AmpConfigRole is 'client' th… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.24.1.1.1.9 |