ExaltComProducts Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
10

te1Interfaces

table
.1.3.6.1.4.1.25651.1.2.3.2.2.4 · 1 row entry · 5 columns
Open in standard view 
Attributes for T1 or E1 ports.
te1Interface entry .1.3.6.1.4.1.25651.1.2.3.2.2.4.1
An entry in the T1/E1 Attribute table.
Indexes
te1Status t1LBO te1AIS t1LineCode te1LoopBackMode
Column Syntax OID
te1Status
The T1/E1 status: enable(1)/disable(0).
Parameter allows to enable/disable each individual T1 channel.
See Web, Configuration, Interface, T1/E1, Status.
To make permanent, write save to commitTe1Settings after change.
ExaltCommTe1StatusTr/w
Textual Convention: ExaltCommTe1StatusT Enumeration
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.25651.1.2.3.2.2.4.1.1
t1LBO
The Line Build Out length range.
Valid values (ft): lbo0to133(0), lbo133to266(1), lbo266to399(2), lbo399to533(3), lbo533to655(4).
See Web, Configuration, Interface, T1/E1, LBO.
To make permanent, write save to commitTe1…
feetExaltCommTe1LboTr/w
Textual Convention: ExaltCommTe1LboT Enumeration
Type Values:
-1notAvail
0lbo0to133
1lbo133to266
2lbo266to399
3lbo399to533
4lbo533to655
 .1.3.6.1.4.1.25651.1.2.3.2.2.4.1.2
te1AIS
The T1/E1 AIS enabled flag: enable(1)/disable(0).
If enabled, the radio places an AIS code on the output of the associated interface
if and when the link fails or when there is no E1 signal available from the far
end t…
ExaltCommTe1StatusTr/w
Textual Convention: ExaltCommTe1StatusT Enumeration
Type Values:
0disabled
1enabled
 .1.3.6.1.4.1.25651.1.2.3.2.2.4.1.3
t1LineCode
The T1/E1 Line Code type: b8zs(0), ami(1).
See Web, Configuration, Interface, T1/E1, AIS, Line Code.
To make permanent, write save to commitTe1Settings after change.
ExaltCommTe1LineCodeTr/w
Textual Convention: ExaltCommTe1LineCodeT Enumeration
Type Values:
-1notAvail
0b8zs
1ami
 .1.3.6.1.4.1.25651.1.2.3.2.2.4.1.4
te1LoopBackMode
The Loop Back Mode for a T1/E1 interface.
Valid values: disabled(0), ExternalLocal(1), ExternalRemote(2), Internal(3).
All loopback configurations control the loop at the Line Interface integrated circuit,
which is the …
ExaltCommTe1LoopBackModeTr/w
Textual Convention: ExaltCommTe1LoopBackModeT Enumeration
Type Values:
0lbDisabled
1lbExtLocal
2lbExtRemote
3lbInternal
 .1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5

locTE1Alarms

table
.1.3.6.1.4.1.25651.1.2.4.2.3.3.2 · 1 row entry · 1 columns
Open in standard view 
The Local T1/E1 Interface Alarms.
locTe1AlarmsEntry entry .1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1
T1/E1 Alarms table Entry.
Indexes
locTe1Alarm
Column Syntax OID
locTe1Alarm
The Alarms state for the Local T1/E1 Channel.
Possible values:
- almNORMAL(0) - Enabled and connection present
- almMAJOR(2) - Enabled and no connection present
- almDisable(3) - Disabled and no connection present
-…
ExaltCommAlarmLevelT
Textual Convention: ExaltCommAlarmLevelT Enumeration
Type Values:
0almNORMAL
1almMINOR
2almMAJOR
3almDisable
4almNotAvailable
5almClearChanel
6almNonOccupant
 .1.3.6.1.4.1.25651.1.2.4.2.3.3.2.1.1

remTE1Alarms

table
.1.3.6.1.4.1.25651.1.2.4.2.4.3.2 · 1 row entry · 1 columns
Open in standard view 
The Remotel T1/E1 Interface Alarms.
remTe1AlarmsEntry entry .1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1
T1/E1 Alarms table Entry.
Indexes
remTe1Alarm
Column Syntax OID
remTe1Alarm
The Alarms state for the Local T1/E1 Channel of far end radio.
Possible values:
- almNORMAL(0) - Enabled and connection present
- almMAJOR(2) - Enabled and no connection present
- almDisable(3) - Disabled and no conn…
ExaltCommAlarmLevelT
Textual Convention: ExaltCommAlarmLevelT Enumeration
Type Values:
0almNORMAL
1almMINOR
2almMAJOR
3almDisable
4almNotAvailable
5almClearChanel
6almNonOccupant
 .1.3.6.1.4.1.25651.1.2.4.2.4.3.2.1.1

locEthPerfInterfaces

table
.1.3.6.1.4.1.25651.1.2.4.3.1.16 · 1 row entry · 3 columns
Open in standard view 
Performance characteristics of local Ethernet interfaces
locEthPerfInterfacesEntry entry .1.3.6.1.4.1.25651.1.2.4.3.1.16.1
An entry in the Performance characteristics of local Ethernet interfaces table
Indexes
locEthUtilizationIn locEthUtilizationOut locEthSpeed
Column Syntax OID
locEthUtilizationIn
Inbound ethernet utilization (%).
See Web, Analysis, Ethernet Utilization.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25651.1.2.4.3.1.16.1.1
locEthUtilizationOut
Outbound ethernet utilization (%).
See Web, Analysis, Ethernet Utilization.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25651.1.2.4.3.1.16.1.2
locEthSpeed
Current Ethernet Speed.
See Web, Monitor, Ethernet Performance.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25651.1.2.4.3.1.16.1.3