ES4626H-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

372

switchInfoTable

table

.1.3.6.1.4.1.259.6.10.84.1.1.3 · 1 row entry · 16 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry entry .1.3.6.1.4.1.259.6.10.84.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

swUnitIndex

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.4

swBootRomVer

Boot ROM code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.5

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.6

swPortNumber

The number of ports on this switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

Enumerated Values:

1	internalPower
2	redundantPower
3	internalAndRedundantPower

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.10

swExpansionSlot1

Type of expansion module in this switch slot 1.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.11

swExpansionSlot2

Type of expansion module in this switch slot 2.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.12

swServiceTag

Service tag serial-number of the switch.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.13

swModelNumber

Model number of the switch.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.14

swEpldVer

The EPLD version of the switch.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.15

swExpectedModuleOpCodeVer

The module opcode version reside in the switch, note that
this variable represent the desired version of the
module which might plug in. For version validation, only
the swExpectedModuleOpCodeVer of the master
is used…

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.6.10.84.1.1.3.1.16

switchIndivPowerTable

table

.1.3.6.1.4.1.259.6.10.84.1.1.6 · 1 row entry · 3 columns

Open in standard view

Table about the status of individual powers.

switchIndivPowerEntry entry .1.3.6.1.4.1.259.6.10.84.1.1.6.1

Table about the status of individual power.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column Syntax OID

swIndivPowerUnitIndex

This is defined as swUnitIndex.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.6.1.1

swIndivPowerIndex

1 means internal power, 2 means external power.

Enumeration

Enumerated Values:

1	internalPower
2	externalPower

.1.3.6.1.4.1.259.6.10.84.1.1.6.1.2

swIndivPowerStatus

notPresent(1) means not present, green(2) means
up, red(3) means down.

Enumeration

Enumerated Values:

1	notPresent
2	green
3	red

.1.3.6.1.4.1.259.6.10.84.1.1.6.1.3

switchFanTable

table

.1.3.6.1.4.1.259.6.10.84.1.1.9 · 1 row entry · 6 columns

Open in standard view

The fan status table.

switchFanEntry entry .1.3.6.1.4.1.259.6.10.84.1.1.9.1

A conceptual row of the switchFanTable.

Indexes

switchUnitIndex switchFanIndex

Column Syntax OID

switchUnitIndex

The unit of the switch for the stackable device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.9.1.1

switchFanIndex

The unit number of the fan.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.9.1.2

switchFanStatus

Indicating the status of the fan, 1:ok; 2:failure.

Enumeration

Enumerated Values:

1	ok
2	failure

.1.3.6.1.4.1.259.6.10.84.1.1.9.1.3

switchFanAdminSpeed

The speed of the fan, measured in rpm (rotations per
minute). Set this object to 0 to enter auto mode,
set to other values to enter manual mode.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.9.1.4

switchFanFailureCount

The total failure count of the fan since the switch
has reboot.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.9.1.5

switchFanOperSpeed

The operational value of the fan speed, measured in rpm (rotations per
minute).

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.9.1.6

switchThermalTempTable

table

.1.3.6.1.4.1.259.6.10.84.1.1.11 · 1 row entry · 3 columns

Open in standard view

The table which collects temperature infomration of the 
switch.

switchThermalTempEntry entry .1.3.6.1.4.1.259.6.10.84.1.1.11.1

A conceptual row of the switchThermalTempTable.

Indexes

switchThermalTempUnitIndex switchThermalTempThermalIndex

Column	Syntax	OID
switchThermalTempUnitIndex The unit of the switch for stackable device.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.1.11.1.1`
switchThermalTempThermalIndex The thermal index of the switch.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.1.11.1.2`
switchThermalTempValue The temperature value in the device in grade Celsius.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.1.11.1.3`

switchThermalActionTable

table

.1.3.6.1.4.1.259.6.10.84.1.1.12 · 1 row entry · 7 columns

Open in standard view

The table for configuring the thermal action.

switchThermalActionEntry entry .1.3.6.1.4.1.259.6.10.84.1.1.12.1

A conceptual row of the switchThermalActionTable.

Indexes

switchThermalActionUnitIndex switchThermalActionThermalIndex switchThermalActionIndex

Column Syntax OID

switchThermalActionUnitIndex

The unit of the switch for stackable device.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.1

switchThermalActionThermalIndex

The thermal index of the switch.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.2

switchThermalActionIndex

The action index of the switchTheramlActionTable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.3

switchThermalActionRisingThreshold

The rising threshold of the switch temperature.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.4

switchThermalActionFallingThreshold

The falling threshold of the switch temperature.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.5

switchThermalActionAction

The action that will be taken when the
temperature exceeds the rising threshold
or falls below the falling threshold.

Bitsr/w

Enumerated Values:

trap

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.6

switchThermalActionStatus

Set valid(1) to create an entry, Set Invalid(2) to delete an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.1.12.1.7

switchModuleInfoTable

table

.1.3.6.1.4.1.259.6.10.84.1.1.13 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch modules in this system.

switchModuleInfoEntry entry .1.3.6.1.4.1.259.6.10.84.1.1.13.1

Table providing descriptions and status information for
switch modules.

Indexes

swModuleUnitIndex swModuleModuleIndex

Column Syntax OID

swModuleUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.1

swModuleModuleIndex

This object identifies the module within the switch
for which this entry contains information.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.2

swModuleHardwareVer

Hardware version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.3

swModuleMicrocodeVer

Microcode version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.4

swModuleLoaderVer

Loader version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.5

swModuleBootRomVer

Boot ROM code version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.6

swModuleOpCodeVer

Operation code version of the module board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.7

swModulePortNumber

The number of ports of this module.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.8

swModuleSerialNumber

Serial number of the module.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.9

swModuleType

Type of module.

Enumeration

Enumerated Values:

1	notPresent
2	other
3	hundredBaseFxScMmf
4	hundredBaseFxScSmf
5	hundredBaseFxMtrjMmf
6	thousandBaseSxScMmf
7	thousandBaseSxMtrjMmf
8	thousandBaseXGbic
9	thousandBaseLxScSmf
10	thousandBaseT
11	stackingModule
12	thousandBaseSfp
13	tenHundredBaseT4port
14	tenHundredBaseFxMtrj4port
15	comboStackingSfp
16	tenHundredBaseT
17	comboThousandBaseTxSfp
18	eightPortSfpModule
19	tenGigaPortModule

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.10

swModuleModelNumber

Model number of the module.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.11

swModuleEpldVer

The EPLD version of the module.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.12

swModuleDescr

A textual description of the entity to describe the
module.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.6.10.84.1.1.13.1.13

portTable

table

.1.3.6.1.4.1.259.6.10.84.1.2.1 · 1 row entry · 11 columns

Open in standard view

Table of descriptive and status information describing 
the configuration of each switch port. This table also 
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.259.6.10.84.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch.

Enumeration

Enumerated Values:

1	other
2	hundredBaseTX
3	hundredBaseFX
4	thousandBaseSX
5	thousandBaseLX
6	thousandBaseT
7	thousandBaseGBIC
8	thousandBaseSfp
9	hundredBaseFxScSingleMode
10	hundredBaseFxScMultiMode
11	thousandBaseCX
12	tenG

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mod…

Enumerationr/w

Enumerated Values:

1	reserved
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
5	tx
6	rx

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

Enumerated Values:

0	portCap10half
1	portCap10full
2	portCap100half
3	portCap100full
4	portCap1000half
5	portCap1000full
6	portCap10gHalf
7	portCap10gFull
8	reserved8
9	reserved9
10	reserved10
11	reserved11
12	reserved12
13	reserved13
14	portCapSym
15	portCapFlowCtrl

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently conf…

Enumeration

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding tru…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.10

portComboForcedMode

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal…

Enumerationr/w

Enumerated Values:

1	none
2	copperForced
3	copperPreferredAuto
4	sfpForced
5	sfpPreferredAuto

.1.3.6.1.4.1.259.6.10.84.1.2.1.1.12

trunkTable

table

.1.3.6.1.4.1.259.6.10.84.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each 
trunk.

trunkEntry entry .1.3.6.1.4.1.259.6.10.84.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.6.10.84.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

Enumerated Values:

1	static
2	lacp

.1.3.6.1.4.1.259.6.10.84.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.5.2 · 1 row entry · 9 columns

Open in standard view

The table manages port settings for Spanning Tree 
Protocol 802.1d, 802.1w or 802.1s depending on the 
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortFastForward

Whether fast forwarding is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.2

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.3

staPortAdminEdgePort

The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.4

staPortOperEdgePort

The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

0	forceTrue
1	forceFalse
2	auto

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.7

staPortSystemStatus

Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.9

staPortLongAdminPathCost

The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This obje…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.10

staPortLongOperPathCost

The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This objec…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.6.10.84.1.5.2.1.11

xstInstanceCfgTable

table

.1.3.6.1.4.1.259.6.10.84.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure the property of a specific 
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry entry .1.3.6.1.4.1.259.6.10.84.1.5.6.4.1

A conceptual row containing the property of the RST or MST instance.

Indexes

xstInstanceCfgIndex

Column Syntax OID

xstInstanceCfgIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

Constraints:
range: 1-64

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

Constraints:
range: 0-61440

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root iden…

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the p…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the …

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related …

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…

StaPathCostMode

Textual Convention: StaPathCostMode Enumeration

Type Values:

1	short
2	long

.1.3.6.1.4.1.259.6.10.84.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.259.6.10.84.1.5.6.5 · 1 row entry · 11 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide 
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.259.6.10.84.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column Syntax OID

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active li…

Integer32r/w

Constraints:
range: 0-240

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but do…

Enumeration

Enumerated Values:

1	discarding
2	learning
3	forwarding

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.5

xstInstancePortDesignatedRoot

The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.9

xstInstancePortDesignatedPort

The port identifier of the port on the designated
bridge for this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the learning state to the forwarding state.

SNMPv2-SMICounter32

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup
6	master

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.12

xstInstancePortAdminPathCost

The admin value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports atta…

Integer32r/w

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.13

xstInstancePortOperPathCost

The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attac…

Integer32

Constraints:
range: 1-200000000

.1.3.6.1.4.1.259.6.10.84.1.5.6.5.1.14

mstInstanceEditTable

table

.1.3.6.1.4.1.259.6.10.84.1.5.6.6 · 1 row entry · 6 columns

Open in standard view

The instance table for the Multiple Spanning Tree region

mstInstanceEditEntry entry .1.3.6.1.4.1.259.6.10.84.1.5.6.6.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceEditIndex

Column	Syntax	OID
mstInstanceEditIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 1-64`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.6.1.1`
mstInstanceEditVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.6.1.2`
mstInstanceEditVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.6.1.3`
mstInstanceEditVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.6.1.4`
mstInstanceEditVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.6.1.5`
mstInstanceEditRemainingHops The remaining hop count for this MST instance.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.6.1.6`

mstInstanceOperTable

table

.1.3.6.1.4.1.259.6.10.84.1.5.6.7 · 1 row entry · 5 columns

Open in standard view

The Multiple Spanning Tree region instance vlan mapped table.

mstInstanceOperEntry entry .1.3.6.1.4.1.259.6.10.84.1.5.6.7.1

A conceptual row containing the status of the MSTP instance.

Indexes

mstInstanceOperIndex

Column	Syntax	OID
mstInstanceOperIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32 Constraints: `range: 0-4094`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.7.1.1`
mstInstanceOperVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.7.1.2`
mstInstanceOperVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.7.1.3`
mstInstanceOperVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.7.1.4`
mstInstanceOperVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.6.10.84.1.5.6.7.1.5`

mirrorTable

table

.1.3.6.1.4.1.259.6.10.84.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.259.6.10.84.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.259.6.10.84.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.8.1.1.4

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.259.6.10.84.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.259.6.10.84.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.6.10.84.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.6.10.84.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static multicast router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.6.10.84.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.259.6.10.84.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.259.6.10.84.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopR…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.6.10.84.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.6.10.84.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.9.9.1.3

igmpSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.259.6.10.84.1.9.10 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.259.6.10.84.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.6.10.84.1.9.10.1.1`
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.6.10.84.1.9.10.1.2`
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.6.10.84.1.9.10.1.3`
igmpSnoopMulticastCurrentStatus The set of ports which are static IGMP member ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.6.10.84.1.9.10.1.4`

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.259.6.10.84.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.259.6.10.84.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.6.10.84.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.6.10.84.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.6.10.84.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.9.11.1.4

ipv6netConfigTable

table

.1.3.6.1.4.1.259.6.10.84.1.10.9 · 1 row entry · 10 columns

Open in standard view

A table of netConfigEntry.

ipv6netConfigEntry entry .1.3.6.1.4.1.259.6.10.84.1.10.9.1

A set of configuration parameters for a particular ipv6
network interface on this device. If the device has no ipv6 network
interface, this table is empty.

The index is composed of the ifIndex assigned to t…

Indexes

ipv6netConfigIfIndex ipv6netConfigIpAddressType ipv6netConfigIpAddress

Column Syntax OID

ipv6netConfigIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

bitsInteger32

Constraints:
range: 0-128

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.1

ipv6netConfigIpAddressType

The address type of the address associated with this agent.
Only ipv4 and ipv6 types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.2

ipv6netConfigIpAddress

The IPv6 address to which this entry's addressing
information pertains.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.3

ipv6netConfigPrefixLength

The length of the prefix (in bits) associated with
the IPv6 address of this entry.

bitsINET-ADDRESS-MIBInetAddressPrefixLength

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.4

ipv6netConfigAddrType

The type of address. Note that 'stateless(1)'
refers to an address that was statelessly
autoconfigured; 'stateful(2)' refers to a address
which was acquired by via a stateful protocol
(e.g. DHCPv6, manual configuration).

Enumeration

Enumerated Values:

1	stateless
2	stateful
3	unknown

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.5

ipv6netConfigAddrAnycastFlag

This object has the value 'true(1)', if this
address is an anycast address and the value
'false(2)' otherwise.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.6

ipv6netConfigAddrStatus

Address status. The preferred(1) state indicates
that this is a valid address that can appear as
the destination or source address of a packet.
The deprecated(2) state indicates that this is
a valid but deprecated addr…

Enumeration

Enumerated Values:

1	preferred
2	deprecated
3	invalid
4	inaccessible
5	unknown

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.7

ipv6netConfigAddrFlag

determine the way by which final address is generated.

Enumerationr/w

Enumerated Values:

1	duplicated
2	tentative
3	eui-64

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.8

ipv6netConfigGeneralPrefixBased

The general prefix index associated with
the IPv6 address of this entry, and zero value means this address entry is not
configurated by any general prefix.

bitsInteger32

Constraints:
range: 0-128

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.9

ipv6netConfigStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.10.9.1.10

ipv6GeneralPrefixTable

table

.1.3.6.1.4.1.259.6.10.84.1.10.13 · 1 row entry · 5 columns

Open in standard view

a list of general prefix entries.

ipv6GeneralPrefixEntry entry .1.3.6.1.4.1.259.6.10.84.1.10.13.1

one general prefix entry describes the address prefix.

Indexes

ipv6GeneralPrefixIndex

Column Syntax OID

ipv6GeneralPrefixIndex

The index of the general prefix entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.10.13.1.1

ipv6GeneralPrefixName

the name for this general prefix entry.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.10.13.1.2

ipv6GeneralPrefixAddressType

The address type of the address associated with this agent.
Only ipv6 type is supported.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.10.13.1.3

ipv6GeneralPrefixAddress

address prefix value for this general prefix entry.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.10.13.1.4

ipv6GeneralPrefixLength

The length (in bits) associated with
the IPv6 address prefix of this entry.

bitsINET-ADDRESS-MIBInetAddressPrefixLengthr/w

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.6.10.84.1.10.13.1.5

iPAddrTable

table

.1.3.6.1.4.1.259.6.10.84.1.10.16 · 1 row entry · 6 columns

Open in standard view

A table of iPAddrEntry.

iPAddrEntry entry .1.3.6.1.4.1.259.6.10.84.1.10.16.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

iPAddrIPAddress iPAddrSubnetMask

Column Syntax OID

iPAddrIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what …

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.6.10.84.1.10.16.1.1

iPAddrSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out wha…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.6.10.84.1.10.16.1.2

iPAddrIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.10.16.1.3

iPAddrPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

Enumerated Values:

1	primary
2	secondary

.1.3.6.1.4.1.259.6.10.84.1.10.16.1.4

iPAddrUnnumbered

Whether this is an unnumbered interface.

Enumeration

Enumerated Values:

1	unnumbered
2	notUnnumbered

.1.3.6.1.4.1.259.6.10.84.1.10.16.1.5

iPAddrStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.10.16.1.6

bcastStormTable

table

.1.3.6.1.4.1.259.6.10.84.1.11.1 · 1 row entry · 3 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.259.6.10.84.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column Syntax OID

bcastStormIfIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.11.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.11.1.1.2

bcastStormPktRate

Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port.

Integer32r/w

Constraints:
range: 500-262143

.1.3.6.1.4.1.259.6.10.84.1.11.1.1.4

vlanTable

table

.1.3.6.1.4.1.259.6.10.84.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.259.6.10.84.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column Syntax OID

vlanIndex

Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.6.10.84.1.12.1.1.1

vlanAddressMethod

Method to get the IP address.

Enumerationr/w

Enumerated Values:

1	user
2	bootp
3	dhcp

.1.3.6.1.4.1.259.6.10.84.1.12.1.1.2

vlanPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.12.2 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column Syntax OID

vlanPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRID…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.12.2.1.1

vlanPortMode

This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.

Enumerationr/w

Enumerated Values:

1	hybrid
2	dot1qTrunk

.1.3.6.1.4.1.259.6.10.84.1.12.2.1.2

vlanDot1qTunnelPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.12.6 · 1 row entry · 3 columns

Open in standard view

Table for port configuration in 802.1Q Tunneling.

vlanDot1qTunnelPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.12.6.1

Entry for port configuration in 802.1Q Tunneling.

Indexes

vlanDot1qTunnelPortIndex

Column Syntax OID

vlanDot1qTunnelPortIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.12.6.1.1

vlanDot1qTunnelPortMode

This variable sets the 802.1Q Tunneling mode.
Setting it to none(1) indicates no mode in this port.
Setting it to dot1qTunnel(2) sets as dot1q-tunnel mode port which link to customer.
Setting it to dot1qTunnelUplink(3) …

Enumerationr/w

Enumerated Values:

1	none
2	dot1qTunnel
3	dot1qTunnelUplink

.1.3.6.1.4.1.259.6.10.84.1.12.6.1.2

vlanDot1qTunnelPortEtherType

TPID for 802.1Q encapsulation. It's used to select a nonstandard
(nondefault) 2-byte ethertype to identify 802.1Q tagged frames.

Unsigned32r/w

Constraints:
range: 32768-65535

.1.3.6.1.4.1.259.6.10.84.1.12.6.1.3

prioIpPrecTable

table

.1.3.6.1.4.1.259.6.10.84.1.13.2 · 1 row entry · 3 columns

Open in standard view

Table for IP precedence priority mapping.

prioIpPrecEntry entry .1.3.6.1.4.1.259.6.10.84.1.13.2.1

Entry for IP precedence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort The port or the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.13.2.1.2`
prioIpPrecValue Value of IP ToS Precedence as specified in the packet header.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.6.10.84.1.13.2.1.3`
prioIpPrecCos Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue a…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.6.10.84.1.13.2.1.4`

prioIpDscpTable

table

.1.3.6.1.4.1.259.6.10.84.1.13.4 · 1 row entry · 3 columns

Open in standard view

Table for IP DSCP priority mapping.

prioIpDscpEntry entry .1.3.6.1.4.1.259.6.10.84.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.13.4.1.1`
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: `range: 0-63`	`.1.3.6.1.4.1.259.6.10.84.1.13.4.1.2`
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (CoS). This CoS is then further mapped to the hard…	Integer32r/w Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.6.10.84.1.13.4.1.3`

prioIpPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.13.7 · 1 row entry · 4 columns

Open in standard view

Table for IP port priority mapping.

prioIpPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column Syntax OID

prioIpPortPhysPort

The port or the trunk (excluding trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.13.7.1.1

prioIpPortValue

IP port for this value.

Integer32

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.6.10.84.1.13.7.1.2

prioIpPortCos

Class of service for this entry.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.6.10.84.1.13.7.1.3

prioIpPortStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.13.7.1.4

prioWrrPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.13.12 · 1 row entry · 3 columns

Open in standard view

Table for per port weighted round robin (WRR).

prioWrrPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.13.12.1

Entry for per port weighted round robin (WRR).

Indexes

prioWrrPortIfIndex prioWrrPortTrafficClass

Column	Syntax	OID
prioWrrPortIfIndex The port interface of the prioWrrPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.13.12.1.1`
prioWrrPortTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.6.10.84.1.13.12.1.2`
prioWrrPortWeight Weight for this entry.	Integer32r/w Constraints: `range: 1-15`	`.1.3.6.1.4.1.259.6.10.84.1.13.12.1.3`

trapDestTable

table

.1.3.6.1.4.1.259.6.10.84.1.14.1 · 1 row entry · 6 columns

Open in standard view

A list of trap destination entries.

trapDestEntry entry .1.3.6.1.4.1.259.6.10.84.1.14.1.1

A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap.

Indexes

trapDestAddressType trapDestAddress

Column Syntax OID

trapDestAddressType

The address type of the address associated with this agent.
Only ipv4(1),ipv6(2) and ipv6z(4) types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.14.1.1.1

trapDestAddress

The address to send traps.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.14.1.1.2

trapDestCommunity

A community to which this destination address belongs.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.259.6.10.84.1.14.1.1.3

trapDestStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.14.1.1.4

trapDestVersion

Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent.

Enumerationr/w

Enumerated Values:

1	version1
2	version2

.1.3.6.1.4.1.259.6.10.84.1.14.1.1.5

trapDestUdpPort

Determines the UDP port number that the trap will be sent to.

INET-ADDRESS-MIBInetPortNumberr/w

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.259.6.10.84.1.14.1.1.6

rateLimitPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.1.2 · 1 row entry · 5 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.1.2.1.1

rlPortInputLimit

Value of the input rate limit. Its unit is megabits per
second. For a 100 Mbps port, the range is 1 to 100.
For a 1000 Mbps port, the range is 1 to 1000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.1.2.1.2

rlPortOutputLimit

Value of the output rate limit. Its unit is megabits per
second. For a 100 Mbps port, the range is 1 to 100.
For a 1000 Mbps port, the range is 1 to 1000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.1.2.1.3

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.16.1.2.1.7

diffServPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.9 · 1 row entry · 5 columns

Open in standard view

Table for differentiated services on each port.

diffServPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.9.1

Entry for differentiated services on each port.

Indexes

diffServPortIfIndex

Column	Syntax	OID
diffServPortIfIndex This object is the interface index of diffServPortEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.16.4.9.1.1`
diffServPortPolicyMapIndex Specifies the policy map binding to the interface. The policy map identified by a particular value of this index is associated with the same DiffServPolicyMapEntry as identified by the same value of diffServPolicyMapInd…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.16.4.9.1.2`
diffServPortIngressIpAclIndex Specifies the ingress IP ACL binding to the interface. The ingress IP ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.16.4.9.1.3`
diffServPortIngressMacAclIndex Specifies the ingress MAC ACL binding to the interface. The ingress MAC ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclIndex.	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.16.4.9.1.4`
diffServPortIngressIpv6AclIndex Specifies the ingress IPv6 ACL binding to the interface. The ingress IPv6 ACL identified by a particular value of this index is associated with the same diffServAclEntry as identified by the same value of diffServAclInd…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.6.10.84.1.16.4.9.1.5`

diffServPolicyMapTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.10 · 1 row entry · 5 columns

Open in standard view

Table for policy map.

diffServPolicyMapEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.10.1

Entry for policy map.

Indexes

diffServPolicyMapIndex

Column Syntax OID

diffServPolicyMapIndex

An index that uniquely identifies an entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.10.1.1

diffServPolicyMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.259.6.10.84.1.16.4.10.1.2

diffServPolicyMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.16.4.10.1.3

diffServPolicyMapElementIndexList

The octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.259.6.10.84.1.16.4.10.1.4

diffServPolicyMapStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:

- 'active', which indi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.10.1.5

diffServPolicyMapElementTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.12 · 1 row entry · 5 columns

Open in standard view

Table for policy map element.

diffServPolicyMapElementEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.12.1

Entry for policy map element.

Indexes

diffServPolicyMapElementIndex

Column Syntax OID

diffServPolicyMapElementIndex

An index that uniquely identifies an entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.12.1.1

diffServPolicyMapElementClassMapIndex

Specifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.12.1.2

diffServPolicyMapElementMeterIndex

Specifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is …

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.12.1.3

diffServPolicyMapElementActionIndex

Specifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.12.1.4

diffServPolicyMapElementStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:

The status column has six defined values:

- 'acti…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.12.1.5

diffServClassMapTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.13 · 1 row entry · 7 columns

Open in standard view

Table for class map.

diffServClassMapEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.13.1

Entry for class map.

Indexes

diffServClassMapIndex

Column Syntax OID

diffServClassMapIndex

An index that uniquely identifies an entry in this table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.1

diffServClassMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.2

diffServClassMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.3

diffServClassMapMatchType

The map match type of this entry.

Enumerationr/w

Enumerated Values:

1	matchAny
2	matchAll

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.4

diffServClassMapElementIndexTypeList

The octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
differServCla…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.5

diffServClassMapElementIndexList

The octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The …

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.6

diffServClassMapStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.13.1.7

diffServAclTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.15 · 1 row entry · 5 columns

Open in standard view

Table for ACL.

diffServAclEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.15.1

Entry for ACL.

Indexes

diffServAclIndex

Column Syntax OID

diffServAclIndex

An index that uniquely identifies an entry in the ACL
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.15.1.1

diffServAclName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-16

.1.3.6.1.4.1.259.6.10.84.1.16.4.15.1.2

diffServAclType

The type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be aoto-
unbound from the diffServPortTable and the
di…

Enumerationr/w

Enumerated Values:

1	mac
2	ipstandard
3	ipextended
4	ipv6standard
5	ipv6extended

.1.3.6.1.4.1.259.6.10.84.1.16.4.15.1.3

diffServAclAceIndexList

The octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate th…

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.6.10.84.1.16.4.15.1.4

diffServAclStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

- 'active', which indicates that the conceptual row is
availa…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.15.1.5

diffServIpAceTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.17 · 1 row entry · 22 columns

Open in standard view

Table for IP ACE.

diffServIpAceEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.17.1

Entry for IP ACE.

Indexes

diffServIpAceIndex

Column Syntax OID

diffServIpAceIndex

An index that uniquely identifies an entry in the IP ACE
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.1

diffServIpAceType

The specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Enumerated Values:

1	standard
2	extended

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.2

diffServIpAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.3

diffServIpAceSourceIpAddr

The specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.4

diffServIpAceSourceIpAddrBitmask

The specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.5

diffServIpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if th…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.6

diffServIpAceDestIpAddrBitmask

The specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.7

diffServIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGM…

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.8

diffServIpAcePrec

Specifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is…

Integer32r/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.9

diffServIpAceTos

Specifies the IP ToS facility value to match against. The
value of this object is ignored whenever the value of
diffServIpAcePrec object is 9. This object may not be modified
if the associated diffServIpAceType object …

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.10

diffServIpAceDscp

Specifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal t…

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.11

diffServIpAceSourcePortOp

Indicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffSe…

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.12

diffServIpAceMinSourcePort

If the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.13

diffServIpAceMaxSourcePort

If the diffServIpAceSourcePortOp is range(3), this indicates
the upper bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.14

diffServIpAceSourcePortBitmask

If the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.15

diffServIpAceDestPortOp

Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is …

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.16

diffServIpAceMinDestPort

If the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.17

diffServIpAceMaxDestPort

If the diffServIpAceDestPortOp is range(3), this indicates
the upper bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.18

diffServIpAceDestPortBitmask

If the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.19

diffServIpAceControlCode

Indicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is …

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.20

diffServIpAceControlCodeBitmask

Indicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.21

diffServIpAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active', wh…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.17.1.22

diffServMacAceTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.18 · 1 row entry · 16 columns

Open in standard view

Table for MAC ACE.

diffServMacAceEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.18.1

Entry for MAC ACE.

Indexes

diffServMacAceIndex

Column Syntax OID

diffServMacAceIndex

An index that uniquely identifies an entry in the MAC ACE
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.1

diffServMacAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.2

diffServMacAcePktformat

Used to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.3

diffServMacAceSourceMacAddr

Indicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this…

TOKEN-RING-RMON-MIBMacAddressr/w

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.4

diffServMacAceSourceMacAddrBitmask

The specified source MAC address mask.

TOKEN-RING-RMON-MIBMacAddressr/w

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.5

diffServMacAceDestMacAddr

Indicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the …

TOKEN-RING-RMON-MIBMacAddressr/w

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.6

diffServMacAceDestMacAddrBitmask

The specified destination MAC address mask.

TOKEN-RING-RMON-MIBMacAddressr/w

Textual Convention: TOKEN-RING-RMON-MIBMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.7

diffServMacAceVidOp

Indicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.8

diffServMacAceMinVid

Indicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3).

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.9

diffServMacAceVidBitmask

The bitmask of the VID if the diffServMacAceVidOp is
equal(2). Default value is 0xfff.

Integer32r/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.10

diffServMacAceMaxVid

Indicates the upper bound of the VID value range if the
diffServMacAceVidOp is range(3). This object cannot be
configured when the status of the entry,
diffServMacAceStatus, is active(1).

Integer32r/w

Constraints:
range: 1-4093

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.11

diffServMacAceEtherTypeOp

Indicates how a packet's ether type is to be compared.

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.12

diffServMacAceEtherTypeBitmask

The bitmask of ether type if the diffServMacAceEtherTypeOp is
equal(2). The default value is 'FFFF'h.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.13

diffServMacAceMinEtherType

Indicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3).

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.14

diffServMacAceMaxEtherType

Indicates the upper bound of the ether type value range if
the diffServMacAceEtherTypeOp is range(3).

Integer32r/w

Constraints:
range: 1536-65535

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.15

diffServMacAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.18.1.16

diffServActionTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.19 · 1 row entry · 8 columns

Open in standard view

Table for action.

diffServActionEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.19.1

Entry for action.

Indexes

diffServActionIndex

Column Syntax OID

diffServActionIndex

An index that uniquely identifies an entry in the
action table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.1

diffServActionList

The bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri, actionPktNewIpPrec and
actionPktNewDscp can not be enabled at the
same time on the entry. The actionRedPktNewDs…

Bitsr/w

Enumerated Values:

0	actionPktNewPri
1	actionPktNewIpPrec
2	actionPktNewDscp
3	actionRedPktNewDscp
4	actionRedDrop

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.2

diffServActionPktNewPri

Specifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.3

diffServActionPktNewIpPrec

Specifies the new IP precedence facility value for
the packet when the action is satisfied. If the
actionPktNewIpPrec bit of the diffServActionList is not
enabled, this object can not be set.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.4

diffServActionPktNewDscp

Specifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.5

diffServActionRedPktNewDscp

Specifies the new DSCP value for the red
marking packet when the action is satisfied. If the
actionRedPktNewDscp bit of the diffServActionList is
not enabled, this object can not be set.

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.6

diffServActionRedDrop

The actionRedDrop bit of the
diffServActionList is for configuring this
object. If the value of this object is enabled, the
red marking packet will be dropped.

P-BRIDGE-MIBEnabledStatus

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.7

diffServActionStatus

This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:

The status column has six defined values:

- 'active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.19.1.8

diffServMeterTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.20 · 1 row entry · 6 columns

Open in standard view

Table for meter.

diffServMeterEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.20.1

Entry for meter.

Indexes

diffServActionIndex

Column Syntax OID

diffServMeterIndex

An entry that describes a single set of token bucket
parameters.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.20.1.1

diffServMeterModel

The Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown.

Enumerationr/w

Enumerated Values:

1	default
2	flow
3	trTcmColorBlind
4	trTcmColorAware
5	srTcmColorBlind
6	srTcmColorAware

.1.3.6.1.4.1.259.6.10.84.1.16.4.20.1.2

diffServMeterRate

The token-bucket rate, in kilobits per second (kbps).

Integer32r/w

Constraints:
range: 1-100000

.1.3.6.1.4.1.259.6.10.84.1.16.4.20.1.3

diffServMeterBurstSize

The maximum number of bytes in a single transmission burst.

Integer32r/w

Constraints:
range: 64-1522

.1.3.6.1.4.1.259.6.10.84.1.16.4.20.1.4

diffServMeterInterval

The time interval used with the token bucket.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.20.1.5

diffServMeterStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.20.1.6

diffServIpv6AceTable

table

.1.3.6.1.4.1.259.6.10.84.1.16.4.21 · 1 row entry · 11 columns

Open in standard view

Table for IPv6 ACE.

diffServIpv6AceEntry entry .1.3.6.1.4.1.259.6.10.84.1.16.4.21.1

Entry fo IPv6 ACE.

Indexes

diffServIpv6AceIndex

Column Syntax OID

diffServIpv6AceIndex

An index that uniquely identifies an entry in the IPv6
table.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.1

diffServIpv6AceType

The specified IP v6 ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Enumerated Values:

1	standard
2	extended

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.2

diffServIpv6AceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.3

diffServIpv6AceSourceIpAddr

Specifies the source IPv6 address.

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.4

diffServIpv6AceSourceIpAddrPrefixLen

The length (in bits) associated with the source IPv6 address
prefix of this entry.

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.5

diffServIpv6AceDestIpAddr

Specifies the destination IPv6 address. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1).

OctetStringr/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.6

diffServIpv6AceDestIpAddrPrefixLen

The length (in bits) associated with the destination IPv6
address prefix of this entry. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.7

diffServIpv6AceNextHeader

Specifies the IPv6 next header. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1).

Integer32r/w

Constraints:
range: 0-256

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.8

diffServIpv6AceDscp

Specifies the DSCP value to match against. This object may not
be modified if the associated diffServIpv6AceType object is
equal to standard(1).

Integer32r/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.9

diffServIpv6AceFlowLabel

Specifies the IPv6 flow label. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1).

Unsigned32r/w

Constraints:
range: 0-16777216

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.10

diffServIpv6AceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.6.10.84.1.16.4.21.1.11

portSecPortTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.2.1 · 1 row entry · 4 columns

Open in standard view

The port security(MAC binding) Table.

portSecPortEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.2.1.1

The entry of portSecPortTable.

Indexes

portSecPortIndex

Column Syntax OID

portSecPortIndex

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.6.10.84.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will b…

Enumerationr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

.1.3.6.1.4.1.259.6.10.84.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the n…

Integer32r/w

Constraints:
range: 0-1024

.1.3.6.1.4.1.259.6.10.84.1.17.2.1.1.4

radiusServerTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.4.1 · 1 row entry · 8 columns

Open in standard view

The table for RADIUS server.

radiusServerEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.4.1.1

The conceptual row for radiusServerTable.

Indexes

radiusServerIndex

Column Syntax OID

radiusServerIndex

The RADIUS server index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.1

radiusServerAddressType

IP address of a RADIUS server.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.2

radiusServerAddress

IP address of a RADIUS server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.3

radiusServerPortNumber

IP port number of a RADIUS server.

INET-ADDRESS-MIBInetPortNumberr/w

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.4

radiusServerKey

Key for RADIUS. This variable can only be set.
When this variable is read, it always returns a
zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.5

radiusServerRetransmit

Maximum number of retransmissions for RADIUS.

Integer32r/w

Constraints:
range: 1-30

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.6

radiusServerTimeout

Timeout for RADIUS.

secondsInteger32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.7

radiusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.17.4.1.1.8

tacacsServerTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.5.1 · 1 row entry · 6 columns

Open in standard view

The table for TACACS server.

tacacsServerEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.5.1.1

The conceptual row for tacacsServerTable.

Indexes

tacacsServerIndex

Column Syntax OID

tacacsServerIndex

The RADIUS server index.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.17.5.1.1.1

tacacsServerAddressType

The address type of the address associated with this agent.
Only ipv4 and ipv6 types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.5.1.1.2

tacacsServerAddress

IP address of TACACS server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.5.1.1.3

tacacsServerPortNumber

IP port number of TACACS server.

INET-ADDRESS-MIBInetPortNumberr/w

Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.259.6.10.84.1.17.5.1.1.4

tacacsServerKey

The encryption key used to authenticate logon access
for the client using TACAS. Do not use blank spaces
in the string. This variable can only be set.
When this variable is read, it always returns a zero-length string.

OctetStringr/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.6.10.84.1.17.5.1.1.5

tacacsServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.17.5.1.1.6

sshConnInfoTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column Syntax OID

sshConnID

The connection ID of the Secure Shell Connection.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.1

sshConnMajorVersion

The SSH major version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.2

sshConnMinorVersion

The SSH minor version.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.3

sshConnStatus

The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start Sta…

Enumeration

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.5

sshConnUserName

The user name of the connection.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.6

sshDisconnect

Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable.

Enumerationr/w

Enumerated Values:

1	noDisconnect
2	disconnect

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.7

sshConnEncryptionTypeStr

The encryption type of the SSH.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.259.6.10.84.1.17.6.6.1.8

sshUserTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.6.29 · 1 row entry · 18 columns

Open in standard view

The conceptual table of all of sshUserEntry.

sshUserEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

sshUserName

Column Syntax OID

sshUserName

User Name.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.1

sshUserRsaKey1

The RSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.2

sshUserRsaKey2

The RSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.3

sshUserRsaKey3

The RSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.4

sshUserRsaKey4

The RSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.5

sshUserRsaKey5

The RSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.6

sshUserRsaKey6

The RSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.7

sshUserRsaKey7

The RSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.8

sshUserRsaKey8

The RSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.9

sshUserDsaKey1

The DSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.10

sshUserDsaKey2

The DSA user key segment 2.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.11

sshUserDsaKey3

The DSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.12

sshUserDsaKey4

The DSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.13

sshUserDsaKey5

The DSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.14

sshUserDsaKey6

The DSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.15

sshUserDsaKey7

The DSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.16

sshUserDsaKey8

The DSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.17

sshUserKeyDelAction

To delete the user key.

For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA us…

Enumerationr/w

Enumerated Values:

1	noDel
2	delRsaKey
3	delDsaKey
4	delBothKeys

.1.3.6.1.4.1.259.6.10.84.1.17.6.29.1.18

ipFilterSnmpTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.9.1 · 1 row entry · 5 columns

Open in standard view

A list of IP address entries.

ipFilterSnmpEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.9.1.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterSnmpStartAddressType ipFilterSnmpStartAddress

Column Syntax OID

ipFilterSnmpStartAddressType

The start IP address.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.9.1.1.1

ipFilterSnmpStartAddress

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.9.1.1.2

ipFilterSnmpEndAddressType

The end IP address.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.9.1.1.3

ipFilterSnmpEndAddress

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.9.1.1.4

ipFilterSnmpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.17.9.1.1.5

ipFilterHTTPTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.9.2 · 1 row entry · 5 columns

Open in standard view

A list of IP address entries.

ipFilterHTTPEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.9.2.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

ipFilterHTTPStartAddressType ipFilterHTTPStartAddress

Column Syntax OID

ipFilterHTTPStartAddressType

The start IP address.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.9.2.1.1

ipFilterHTTPStartAddress

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.9.2.1.2

ipFilterHTTPEndAddressType

The end IP address.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.9.2.1.3

ipFilterHTTPEndAddress

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.9.2.1.4

ipFilterHTTPStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.17.9.2.1.5

ipFilterTelnetTable

table

.1.3.6.1.4.1.259.6.10.84.1.17.9.3 · 1 row entry · 5 columns

Open in standard view

A list of IP address entries.

ipFilterTelnetEntry entry .1.3.6.1.4.1.259.6.10.84.1.17.9.3.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

ipFilterTelnetStartAddressType ipFilterTelnetStartAddress

Column Syntax OID

ipFilterTelnetStartAddressType

The start IP address.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.9.3.1.1

ipFilterTelnetStartAddress

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.9.3.1.2

ipFilterTelnetEndAddressType

The end IP address.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.17.9.3.1.3

ipFilterTelnetEndAddress

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.17.9.3.1.4

ipFilterTelnetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.17.9.3.1.5

remoteLogServerTable

table

.1.3.6.1.4.1.259.6.10.84.1.19.6.4 · 1 row entry · 3 columns

Open in standard view

A Table for storing the remote log Server list.

remoteLogServerEntry entry .1.3.6.1.4.1.259.6.10.84.1.19.6.4.1

A conceptually row for remoteLogServerTable.

Indexes

remoteLogServerIpType remoteLogServerIp

Column Syntax OID

remoteLogServerIpType

The IP address of the remote log Server.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.19.6.4.1.1

remoteLogServerIp

The IP address of the remote log Server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.19.6.4.1.2

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.19.6.4.1.3

sntpServerTable

table

.1.3.6.1.4.1.259.6.10.84.1.23.1.4 · 1 row entry · 3 columns

Open in standard view

Table for SNTP servers

sntpServerEntry entry .1.3.6.1.4.1.259.6.10.84.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column Syntax OID

sntpServerIndex

The index of a server. This table has fixed size.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.259.6.10.84.1.23.1.4.1.1

sntpServerIpAddressType

The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index are 0.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.23.1.4.1.2

sntpServerIpAddress

The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index are 0.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.23.1.4.1.3

fileInfoTable

table

.1.3.6.1.4.1.259.6.10.84.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.259.6.10.84.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

fileInfoUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

Constraints:
range: 1-32

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

bytesSNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A singl…

OctetString

Constraints:
range: 20-20

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.6

fileInfoDelete

Write this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

Enumerated Values:

1	noDelete
2	delete

.1.3.6.1.4.1.259.6.10.84.1.24.2.1.1.7

fileAutoDownloadResultTable

table

.1.3.6.1.4.1.259.6.10.84.1.24.3 · 1 row entry · 3 columns

Open in standard view

This table contains file auto download result information.

fileAutoDownloadResultEntry entry .1.3.6.1.4.1.259.6.10.84.1.24.3.1

A conceptual row for fileAutoDownloadResultTable.

Indexes

fileAutoDownloadResultUnitID

Column Syntax OID

fileAutoDownloadResultUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.24.3.1.1

fileAutoDownloadResultAction

The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing. …

Enumeration

Enumerated Values:

1	notCopying
2	copying

.1.3.6.1.4.1.259.6.10.84.1.24.3.1.2

fileAutoDownloadResultStatus

The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.

FileCopyStatus

Textual Convention: FileCopyStatus Enumeration

Type Values:

1	fileCopyTftpUndefError
2	fileCopyTftpFileNotFound
3	fileCopyTftpAccessViolation
4	fileCopyTftpDiskFull
5	fileCopyTftpIllegalOperation
6	fileCopyTftpUnkownTransferId
7	fileCopyTftpFileExisted
8	fileCopyTftpNoSuchUser
9	fileCopyTftpTimeout
10	fileCopyTftpSendError
11	fileCopyTftpReceiverError
12	fileCopyTftpSocketOpenError
13	fileCopyTftpSocketBindError
14	fileCopyTftpUserCancel
15	fileCopyTftpCompleted
16	fileCopyParaError
17	fileCopyBusy
18	fileCopyUnknown
19	fileCopyReadFileError
20	fileCopySetStartupError
21	fileCopyFileSizeExceed
22	fileCopyMagicWordError
23	fileCopyImageTypeError
24	fileCopyHeaderChecksumError
25	fileCopyImageChecksumError
26	fileCopyWriteFlashFinish
27	fileCopyWriteFlashError
28	fileCopyWriteFlashProgramming
29	fileCopyError
30	fileCopySuccess
31	fileCopyCompleted

.1.3.6.1.4.1.259.6.10.84.1.24.3.1.3

dnsHostTable

table

.1.3.6.1.4.1.259.6.10.84.1.26.3 · 1 row entry · 4 columns

Open in standard view

This table is used to define static host name-to-address mapping.

dnsHostEntry entry .1.3.6.1.4.1.259.6.10.84.1.26.3.1

A conceptual row for the dnsHostTable.

Indexes

dnsHostName dnsHostIndex

Column Syntax OID

dnsHostName

The DNS Host name.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.259.6.10.84.1.26.3.1.1

dnsHostIndex

The secondary index of this dnsHostTable, representing the
sequence of the dnsHostIp.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.259.6.10.84.1.26.3.1.2

dnsHostIpType

The DNS Host IP.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.26.3.1.3

dnsHostIp

The DNS Host IP.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.26.3.1.4

dnsAliasTable

table

.1.3.6.1.4.1.259.6.10.84.1.26.4 · 1 row entry · 2 columns

Open in standard view

This table displays the alias of the host name.

dnsAliasEntry entry .1.3.6.1.4.1.259.6.10.84.1.26.4.1

A conceptual row for the dnsAliasTable.

Indexes

dnsAliasName dnaAliasAlias

Column	Syntax	OID
dnsAliasName Host name.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.259.6.10.84.1.26.4.1.1`
dnaAliasAlias Alias.	OctetString Constraints: `range: 1-255`	`.1.3.6.1.4.1.259.6.10.84.1.26.4.1.2`

dnsDomainListTable

table

.1.3.6.1.4.1.259.6.10.84.1.26.5 · 1 row entry · 2 columns

Open in standard view

This table defines a list of default domain names to complete unqualified host names.

dnsDomainListEntry entry .1.3.6.1.4.1.259.6.10.84.1.26.5.1

A conceptual row for the dnsDomainListTable.

Indexes

dnsDomainListName

Column Syntax OID

dnsDomainListName

Domain name.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.259.6.10.84.1.26.5.1.1

dnsDomainListStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.26.5.1.2

dnsNameServerTable

table

.1.3.6.1.4.1.259.6.10.84.1.26.6 · 1 row entry · 3 columns

Open in standard view

To specify the address of one or more 
name servers to use for name and address resolution.
This table has fixed size, will get 0.0.0.0 dnsNameServerIp 
if this entry is not existed.

dnsNameServerEntry entry .1.3.6.1.4.1.259.6.10.84.1.26.6.1

A conceptual row for dnsNameServerTable.

Indexes

dnsNameServerIndex

Column Syntax OID

dnsNameServerIndex

Index of this dnsNameServerTable,
representing the sequence of the dnsNameServerIp.

Integer32

Constraints:
range: 1-6

.1.3.6.1.4.1.259.6.10.84.1.26.6.1.1

dnsNameServerIpType

IP address of name server.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.26.6.1.2

dnsNameServerIp

IP address of name server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.26.6.1.3

dnsCacheTable

table

.1.3.6.1.4.1.259.6.10.84.1.26.7 · 1 row entry · 7 columns

Open in standard view

To display the RRs in DNS cache.

dnsCacheEntry entry .1.3.6.1.4.1.259.6.10.84.1.26.7.1

A conceptual row for the dnsCacheTable.

Indexes

dnsCacheIndex

Column Syntax OID

dnsCacheIndex

The entry sequence number.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.1

dnsCacheFlag

Always get 4, means this record is unreliable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.2

dnsCacheType

Cache Type: address(1); cname(2).

Enumeration

Enumerated Values:

1	address
2	cname

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.3

dnsCacheIpType

The DNS cache IP.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.4

dnsCacheIp

The DNS cache IP.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.5

dnsCacheTtl

The DNS cache TTL.

Integer32

Constraints:
range: 0-876000

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.6

dnsCacheDomain

The DNS cache domain.

OctetString

Constraints:
range: 1-255

.1.3.6.1.4.1.259.6.10.84.1.26.7.1.7

smtpServerIpTable

table

.1.3.6.1.4.1.259.6.10.84.1.27.4 · 1 row entry · 3 columns

Open in standard view

The SMTP server IP table. 
The maximum servers to be added is 3.

smtpServerIpEntry entry .1.3.6.1.4.1.259.6.10.84.1.27.4.1

A conceptual row of the smtpServerIpTable.

Indexes

smtpServerIpType smtpServerIp

Column Syntax OID

smtpServerIpType

SMTP mail server's IP address.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.6.10.84.1.27.4.1.1

smtpServerIp

SMTP mail server's IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.6.10.84.1.27.4.1.2

smtpServerIpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.27.4.1.3

smtpDestEMailTable

table

.1.3.6.1.4.1.259.6.10.84.1.27.5 · 1 row entry · 2 columns

Open in standard view

The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5.

smtpDestEMailEntry entry .1.3.6.1.4.1.259.6.10.84.1.27.5.1

A conceptual row of the smtpDestEMailTable.

Indexes

smtpDestEMail

Column Syntax OID

smtpDestEMail

SMTP destination e-mail address.

OctetString

Constraints:
range: 0-41

.1.3.6.1.4.1.259.6.10.84.1.27.5.1.1

smtpDestEMailStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.6.10.84.1.27.5.1.2