portSpeedDpxCfg
ES4626H-MIB ·
.1.3.6.1.4.1.259.6.10.84.1.2.1.1.4
Object
column
r/w
Enumeration
Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus.
Context
- MIB
- ES4626H-MIB
- OID
.1.3.6.1.4.1.259.6.10.84.1.2.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portEntry
- Table
- portTable
- Siblings
- 10
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | reserved |
2 | halfDuplex10 |
3 | fullDuplex10 |
4 | halfDuplex100 |
5 | fullDuplex100 |
6 | halfDuplex1000 |
7 | fullDuplex1000 |
8 | halfDuplex10g |
9 | fullDuplex10g |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIndex The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.1 |
| portTrunkIndex The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trun… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.10 |
| portComboForcedMode This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port,… | column | Enumeration | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.12 |
| portName The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later). | column | OctetString | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.2 |
| portType Indicates the port type of the configuration of the switch. | column | Enumeration | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.3 |
| portFlowCtrlCfg (1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port … | column | Enumeration | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.5 |
| portCapabilities Port or trunk capabilities. | column | Bits | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.6 |
| portAutonegotiation Whether auto-negotiation is enabled. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.7 |
| portSpeedDpxStatus The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been i… | column | Enumeration | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.8 |
| portFlowCtrlStatus (2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the mem… | column | Enumeration | .1.3.6.1.4.1.259.6.10.84.1.2.1.1.9 |