ECS2100-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

159

Rows

159

Columns

899

switchInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.1.3 · 1 row entry · 13 columns

Open in standard view

Table of descriptive and status information about
the switch units in this system.

switchInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

No indexes recorded

Column Syntax OID

swUnitIndex

This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.

Integer32

Enumerated Values:

1	master
2	backupMaster
3	slave

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.1

swHardwareVer

Hardware version of the main board.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.2

swMicrocodeVer

Microcode version of the main board.

OctetString

Constraints:
range: 0-80

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.3

swLoaderVer

Loader version of the main board.

OctetString

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.4

swOpCodeVer

Operation code version of the main board.

OctetString

Constraints:
range: 0-20

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.6

swPortNumber

The number of ports on this switch.

SNMPv2-SMIInteger32

Constraints:
range: 0-20

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.7

swPowerStatus

Indicates the switch using internalPower(1),
redundantPower(2) or both(3)

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.8

swRoleInSystem

Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.9

swSerialNumber

Serial number of the switch.

OctetString

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.10

swServiceTag

Service tag serial-number of the switch.

OctetString

Enumerated Values:

1	internalPower
2	externalPower

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.13

swModelNumber

Model number of the switch.

OctetString

Enumerated Values:

1	notPresent
2	green
3	red

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.14

swEpldVer

The EPLD version of the switch.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.15

swLinuxVersion

The Linux Kernel version of the switch.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.1.3.1.17

portTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.1 · 1 row entry · 16 columns

Open in standard view

Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk.

portEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

No indexes recorded

Column Syntax OID

portIndex

The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Enumerated Values:

1	error
2	halfDuplex10
3	fullDuplex10
4	halfDuplex100
5	fullDuplex100
6	halfDuplex1000
7	fullDuplex1000
8	halfDuplex10g
9	fullDuplex10g

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.1

portName

The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later).

OctetStringr/w

Enumerated Values:

1	error
2	backPressure
3	dot3xFlowControl
4	none

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.2

portType

Indicates the port type of the configuration of the switch.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.3

portSpeedDpxCfg

Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half…

Enumerationr/w

Enumerated Values:

1	none
2	reserved2
3	reserved3
4	sfpForced
5	reserved5

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.4

portFlowCtrlCfg

(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism…

Enumerationr/w

Enumerated Values:

1	master
2	slave
3	auto
4	autoPreferMaster
5	autoPreferSlave

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.5

portCapabilities

Port or trunk capabilities.

Bitsr/w

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.6

portAutonegotiation

Whether auto-negotiation is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.7

portSpeedDpxStatus

The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case t…

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.8

portFlowCtrlStatus

(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently confi…

Enumeration

Enumerated Values:

0	admin
1	stpLbd
2	stpBpduGuard
3	networkAccessPortLinkDetection
4	networkAccessPortDynamicQos
5	portSec
6	lbd
7	atcBstorm
8	atcMstorm
9	udld

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.9

portTrunkIndex

The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding tru…

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.10

portComboForcedMode

This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.12

portMasterSlaveModeCfg

Configures the PHY mode when auto negotiation is disabled and
speed-duplex is 1000full for giga copper port.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.15

portMacAddrLearningStatus

Set this variable to enabled(1) to start to learn MAC
addresses. Set this variable to disabled(2) to stop to
learn MAC addresses.

P-BRIDGE-MIBEnabledStatusr/w

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.17

portMacAddrLearningCount

The current number of learned MAC addresses.

SNMPv2-SMICounter32

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.18

portUpTime

The port up time (in hundredths of a second).

SNMPv2-SMITimeTicks

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.19

portShutdownReason

The reason of port shutdown. The value is 0 if no
shutdown action is applied to this port.

Bits

Enumerated Values:

1	notTestedYet
2	ok
3	open
4	short
8	impedanceMismatch
9	failed
10	notSupported
11	noCable

.1.3.6.1.4.1.259.10.1.43.1.2.1.1.20

cableDiagResultTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.3.2 · 1 row entry · 10 columns

Open in standard view

Table for cable diagnostics result.

cableDiagResultEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.3.2.1

Entry for cable diagnostics result.

Indexes

No indexes recorded

Column	Syntax	OID
cableDiagResultIfIndex This is defined as the ifIndex.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.1`
cableDiagResultStatusPairA The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack …	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.2`
cableDiagResultStatusPairB The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack …	Enumeration Constraints: `range: 0-20`	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.3`
cableDiagResultStatusPairC The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack …	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.4`
cableDiagResultStatusPairD The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack …	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.5`
cableDiagResultDistancePairA Displays the fault distance of pair A of the cable in meters.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.6`
cableDiagResultDistancePairB Displays the fault distance of pair B of the cable in meters.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.7`
cableDiagResultDistancePairC Displays the fault distance of pair C of the cable in meters.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.8`
cableDiagResultDistancePairD Displays the fault distance of pair D of the cable in meters.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.9`
cableDiagResultTime Displays the last time of cable diagnostics. For example, 'Jan 1 02:03:04 2002'.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.3.2.1.11`

portUtilTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.6 · 1 row entry · 7 columns

Open in standard view

Dispalys port utilization during recent 300 seconds.

portUtilEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.6.1

Dispalys port utilization during recent 300 seconds.

Indexes

No indexes recorded

Column	Syntax	OID
portUtilIfIndex The port and trunk interface of the portUtilTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.1`
portInOctetRate The input octet rate (kbits/sec) of the port.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.2`
portInPacketRate The input packet rate (pkts/sec) of the port.	SNMPv2-SMICounter64 Constraints: `range: 1-65535` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.3`
portInUtil The input utilization of the port, in one per hundred.	SNMPv2-SMIInteger32 Constraints: `range: 1-31` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.4`
portOutOctetRate The output octet rate (kbits/sec) of the port.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.5`
portOutPacketRate The output packet rate (pkts/sec) of the port.	SNMPv2-SMICounter64 Constraints: `range: 1-86400` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.6`
portOutUtil The output utilization of the port, in one per hundred.	SNMPv2-SMIInteger32 Constraints: `range: 1-96` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.6.1.7`

portHistControlTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.8.1 · 1 row entry · 7 columns

Open in standard view

A list of history control entries.

portHistControlEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.8.1.1

A list of parameters that set up a periodic sampling of
statistics.

Indexes

No indexes recorded

Column Syntax OID

portHistControlIndex

An index that uniquely identifies an entry in the
portHistControl table.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.1

portHistControlName

A textual name of the entity. It is mandatory that
this only contain printable ASCII characters.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.2

portHistControlDataSource

This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
portHistControlEntry. This source can be any
interface on this device.

IF-MIBInterfaceIndexr/w

Constraints:
range: 1-65535

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.3

portHistControlInterval

The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
portHistControlEntry. This interval can
be set to any number of seconds between 1 and
…

MinutesInteger32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.4

portHistControlBucketsRequested

The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
portHistControlEntry.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.5

portHistControlBucketsGranted

The number of discrete sampling intervals
over which data shall be saved in the part of
the media-specific table associated with this
portHistControlEntry.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.6

portHistControlStatus

The status of this portHistControl entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.2.8.1.1.7

portHistCurrentTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.8.2 · 1 row entry · 18 columns

Open in standard view

A list of Ethernet history entries.

portHistCurrentEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.8.2.1

An historical sample of Ethernet statistics on a particular
Ethernet interface. This sample is associated with the
portHistControlEntry which set up the parameters for
a regular collection of these samples.

Indexes

No indexes recorded

Column	Syntax	OID
portHistCurrentIndex The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of portHistControlIndex.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.1`
portHistCurrentSampleIndex An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index starts at 1 and increases by one as each new sample is taken.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.2`
portHistCurrentIntervalStart The value of sysUpTime at the start of the interval over which this sample was measured.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.3`
portHistCurrentInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.4`
portHistCurrentInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.5`
portHistCurrentInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.6`
portHistCurrentInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.7`
portHistCurrentInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.8`
portHistCurrentInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of in…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.9`
portHistCurrentInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc…	SNMPv2-SMICounter64 Constraints: `range: 0-10000` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.10`
portHistCurrentOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter64 Constraints: `range: 0-10000` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.11`
portHistCurrentOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.12`
portHistCurrentOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.13`
portHistCurrentOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Constraints: `range: 1-65535` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.14`
portHistCurrentOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter64 Constraints: `range: 1-2147483647` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.15`
portHistCurrentOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.16`
portHistCurrentInUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.17`
portHistCurrentOutUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.2.8.2.1.18`

portHistPreviousTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.8.3 · 1 row entry · 18 columns

Open in standard view

A list of Ethernet history entries.

portHistPreviousEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.8.3.1

Indexes

No indexes recorded

Column	Syntax	OID
portHistPreviousIndex The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of portHistControlIndex.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.1`
portHistPreviousSampleIndex An index that uniquely identifies the particular sample this entry represents among all samples associated with the same portHistControlEntry. This index starts at 1 and increases by one as each new sample is taken.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.2`
portHistPreviousIntervalStart The value of sysUpTime at the start of the interval over which this sample was measured.	SNMPv2-SMITimeTicks Textual Convention: SNMPv2-SMITimeTicks `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.3`
portHistPreviousInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.4`
portHistPreviousInUcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.5`
portHistPreviousInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.6`
portHistPreviousInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.7`
portHistPreviousInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.8`
portHistPreviousInErrors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of in…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.9`
portHistPreviousInUnknownProtos For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc…	SNMPv2-SMICounter64 Constraints: `range: 0-10000` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.10`
portHistPreviousOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter64 Constraints: `range: 0-10000` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.11`
portHistPreviousOutUcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.12`
portHistPreviousOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot…	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.13`
portHistPreviousOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.14`
portHistPreviousOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter64 Constraints: `range: 0-128` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.15`
portHistPreviousOutErrors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not…	SNMPv2-SMICounter64 Constraints: `range: 0-128` Textual Convention: SNMPv2-SMICounter64 `Unsigned64` Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.16`
portHistPreviousInUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.17`
portHistPreviousOutUtilization The best estimate of the mean physical layer network utilization on this interface during this sampling interval, in hundredths of a percent.	Integer32 Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.2.8.3.1.18`

portMediaInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.10 · 1 row entry · 11 columns

Open in standard view

This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table.

portMediaInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.10.1

An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table.

Indexes

No indexes recorded

Column	Syntax	OID
portMediaInfoIfIndex ifindex.	IF-MIBInterfaceIndex Constraints: `range: 0-128` Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.1`
portMediaInfoConnectorType The connector type.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.2`
portMediaInfoFiberType The fiber type.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.3`
portMediaInfoEthComplianceCodes The ethernet compliance codes.	OctetString Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.4`
portMediaInfoBaudRate The baud rate.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.5`
portMediaInfoVendorOUI The OUI of the vendor.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.6`
portMediaInfoVendorName The media vendor name, full name of the corporation.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.7`
portMediaInfoPartNumber The media vendor part number.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.8`
portMediaInfoRevision The media vendor product version number.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.9`
portMediaInfoSerialNumber The vendor serial number of the media device.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.10`
portMediaInfoDateCode The date code of the media device.	OctetString Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.43.1.2.10.1.11`

portOpticalMonitoringInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.11 · 1 row entry · 6 columns

Open in standard view

This table lists the instrumented parameters of all
optical interfaces.

portOpticalMonitoringInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.11.1

Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table.

Indexes

No indexes recorded

Column	Syntax	OID
portOpticalMonitoringInfoIfIndex ifindex.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.2.11.1.1`
portOpticalMonitoringInfoTemperature This object holds the value of the transmitter laser diode temperature for the interface. This object indicates the health of the transmitter. The format is xxx.yyyy C(elcius). If the device supports ALARM WARNING TRAP…	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.11.1.2`
portOpticalMonitoringInfoVcc This object holds the value of the Vcc. It is measured in V. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.11.1.3`
portOpticalMonitoringInfoTxBiasCurrent Tx Bias Current. It is measured in mA. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or high/low warning.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.11.1.4`
portOpticalMonitoringInfoTxPower This object holds the value of the transmitter optical signal power for the interface, measured in dBm. If the device supports ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or…	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.11.1.5`
portOpticalMonitoringInfoRxPower This object holds the value of the receiver optical signal power for the interface, measured in dBm. If the device support ALARM WARNING TRAP, then followed by whether the measured value is normal, high/low alarm or hig…	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.2.11.1.6`

portTransceiverThresholdInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.12 · 1 row entry · 22 columns

Open in standard view

This table lists the threshold of transceivers.

portTransceiverThresholdInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.12.1

Identify the index of the transceiver

Indexes

No indexes recorded

Column Syntax OID

portTransceiverThresholdInfoIfIndex

ifindex.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.1

portTransceiverThresholdInfoTemperatureLowAlarm

This object holds the low alarm threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.2

portTransceiverThresholdInfoTemperatureLowWarn

This object holds the low warning threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.3

portTransceiverThresholdInfoTemperatureHighWarn

This object holds the high warning threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.4

portTransceiverThresholdInfoTemperatureHighAlarm

This object holds the high alarm threshold of
the transmitter laser diode temperature for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.5

portTransceiverThresholdInfoVccLowAlarm

This object holds the low alarm threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.6

portTransceiverThresholdInfoVccLowWarn

This object holds the low warning threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.7

portTransceiverThresholdInfoVccHighWarn

This object holds the high warning threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.8

portTransceiverThresholdInfoVccHighAlarm

This object holds the high alarm threshold
of the Vcc.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.9

portTransceiverThresholdInfoTxBiasCurrentLowAlarm

low alarm threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.10

portTransceiverThresholdInfoTxBiasCurrentLowWarn

low warning threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.11

portTransceiverThresholdInfoTxBiasCurrentHighWarn

high warning threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.12

portTransceiverThresholdInfoTxBiasCurrentHighAlarm

high alarm threshold of Tx Bias Current.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.13

portTransceiverThresholdInfoTxPowerLowAlarm

This object holds the low alarm threshold
of the transmitter optical signal power
for theinterface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.14

portTransceiverThresholdInfoTxPowerLowWarn

This object holds the low warning threshold
of the transmitter optical signal power
for the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.15

portTransceiverThresholdInfoTxPowerHighWarn

This object holds the high warning threshold
of the transmitter optical signal power
for the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.16

portTransceiverThresholdInfoTxPowerHighAlarm

This object holds the high alarm threshold
of the transmitter optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.17

portTransceiverThresholdInfoRxPowerLowAlarm

This object holds the low alarm threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.18

portTransceiverThresholdInfoRxPowerLowWarn

This object holds the low warning threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.19

portTransceiverThresholdInfoRxPowerHighWarn

This object holds the high warning threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.20

portTransceiverThresholdInfoRxPowerHighAlarm

This object holds the high alarm threshold
of the receiver optical signal power for
the interface.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.21

portTransceiverThresholdAutoMode

Indicate the transceiver threshold is retrieved from
EEPROM or configured by user.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.2.12.1.22

powerSavingTable

table

.1.3.6.1.4.1.259.10.1.43.1.2.14 · 1 row entry · 2 columns

Open in standard view

Table for power saving configuration.

powerSavingEntry entry .1.3.6.1.4.1.259.10.1.43.1.2.14.1

An entry describing the configuration and status for
power saving.

Indexes

No indexes recorded

Column Syntax OID

powerSavingIfIndex

The port interface of the powerSavingTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.2.14.1.1

powerSavingStatus

Power saving enabled status.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.2.14.1.2

trunkTable

table

.1.3.6.1.4.1.259.10.1.43.1.3.3 · 1 row entry · 4 columns

Open in standard view

Table describing the configuration and status of each
trunk.

trunkEntry entry .1.3.6.1.4.1.259.10.1.43.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

No indexes recorded

Column Syntax OID

trunkIndex

Identifies the trunk within the switch that is
described by the table entry.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.3.3.1.1

trunkPorts

The complete set of ports currently associated with
this trunk.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.3.3.1.2

trunkCreation

A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.3.3.1.3

trunkStatus

Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.3.3.1.4

lacpPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.4.1 · 1 row entry · 2 columns

Open in standard view

Table for LACP port configuration.

lacpPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

No indexes recorded

Column Syntax OID

lacpPortIndex

The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.4.1.1.1

lacpPortStatus

Whether 802.3ad LACP is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.4.1.1.2

staPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.5.2 · 1 row entry · 15 columns

Open in standard view

The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType.

staPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column Syntax OID

staPortProtocolMigration

When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.3

staPortOperEdgePort

The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.5

staPortAdminPointToPoint

The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…

Enumerationr/w

Enumerated Values:

1	true
2	false
3	auto

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.6

staPortOperPointToPoint

The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.7

staPortSystemStatus

Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.9

staPortLongAdminPathCost

The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This obje…

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.10

staPortLongOperPathCost

The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This objec…

Integer32

Constraints:
range: 30-86400

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.11

staPortBpduFlooding

This parameter is used to configure the capability of BPDUs
flooding.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.12

staPortBpduGuard

A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.15

staPortAdminEdgePortWithAuto

The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port a…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.16

staPortBpduFilter

The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid trans…

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 0-4094

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.17

staPortRootGuardStatus

Specifies the desired status of the root guard. This variable
configures the root guard feature to enforce the root bridge
placement in the network.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 0-61440

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.18

staPortBpduGuardAutoRecovery

A value of enabled(1) indicates that BPDU port guard auto
recovery mechanism is enabled for this port. A value of
disabled(2) indicates that the mechanism is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.19

staPortBpduGuardAutoRecoveryInterval

The interval in seconds used by BPDU guard auto recovery
mechanism.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.20

staPortTcPropStop

Stop topology change progate on this ifindex.
Don't enable on potentially ring port.

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.5.2.1.21

xstInstanceCfgTable

table

.1.3.6.1.4.1.259.10.1.43.1.5.6.4 · 1 row entry · 16 columns

Open in standard view

This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.

xstInstanceCfgEntry entry .1.3.6.1.4.1.259.10.1.43.1.5.6.4.1

A conceptual row containing the property of the RST or MST instance.

Indexes

No indexes recorded

Column Syntax OID

xstInstanceCfgIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.1

xstInstanceCfgPriority

The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.2

xstInstanceCfgTimeSinceTopologyChange

The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.

SNMPv2-SMITimeTicks

Textual Convention: SNMPv2-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.3

xstInstanceCfgTopChanges

The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.4

xstInstanceCfgDesignatedRoot

The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identi…

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.5

xstInstanceCfgRootCost

The cost of the path to the root as seen from
this bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.6

xstInstanceCfgRootPort

The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.7

xstInstanceCfgMaxAge

The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is t…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.8

xstInstanceCfgHelloTime

The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.9

xstInstanceCfgHoldTime

This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.10

xstInstanceCfgForwardDelay

For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the por…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.11

xstInstanceCfgBridgeMaxAge

For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the val…

BRIDGE-MIBTimeout

Constraints:
range: 0-240

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.12

xstInstanceCfgBridgeHelloTime

For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.

BRIDGE-MIBTimeout

Enumerated Values:

1	discarding
2	learning
3	forwarding

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.13

xstInstanceCfgBridgeForwardDelay

For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to…

BRIDGE-MIBTimeout

Textual Convention: BRIDGE-MIBTimeout Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.14

xstInstanceCfgTxHoldCount

For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.15

xstInstanceCfgPathCostMethod

For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…

StaPathCostMode

Textual Convention: StaPathCostMode Enumeration

Type Values:

1	short
2	long

.1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.16

xstInstancePortTable

table

.1.3.6.1.4.1.259.10.1.43.1.5.6.5 · 1 row entry · 11 columns

Open in standard view

The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.

xstInstancePortEntry entry .1.3.6.1.4.1.259.10.1.43.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

No indexes recorded

Column Syntax OID

xstInstancePortPriority

Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active lin…

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.3

xstInstancePortState

The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
…

Enumeration

Enumerated Values:

1	disabled
2	root
3	designated
4	alternate
5	backup
6	master

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.4

xstInstancePortEnable

The enabled/disabled status of the port.

P-BRIDGE-MIBEnabledStatus

Constraints:
range: 1-200000000

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.5

xstInstancePortDesignatedRoot

The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.

BRIDGE-MIBBridgeId

Constraints:
range: 1-200000000

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.7

xstInstancePortDesignatedCost

The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.8

xstInstancePortDesignatedBridge

The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.

BRIDGE-MIBBridgeId

Textual Convention: BRIDGE-MIBBridgeId OctetString

Type Constraints:
range: 8

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.9

xstInstancePortDesignatedPort

The port identifier of the port on the designated
bridge for this port's segment.

OctetString

Constraints:
range: 0-4094

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.10

xstInstancePortForwardTransitions

The number of times this port has transitioned
from the learning state to the forwarding state.

SNMPv2-SMICounter32

Constraints:
range: 0-128

Textual Convention: SNMPv2-SMICounter32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.11

xstInstancePortPortRole

The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …

Enumeration

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.12

xstInstancePortAdminPathCost

The admin value of the MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster med…

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.13

xstInstancePortOperPathCost

The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attache…

Integer32

Constraints:
range: 0-128

.1.3.6.1.4.1.259.10.1.43.1.5.6.5.1.14

mstInstanceEditTable

table

.1.3.6.1.4.1.259.10.1.43.1.5.6.6 · 1 row entry · 6 columns

Open in standard view

The Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable.

mstInstanceEditEntry entry .1.3.6.1.4.1.259.10.1.43.1.5.6.6.1

A conceptual row containing the status of the MSTP instance.

Indexes

No indexes recorded

Column	Syntax	OID
mstInstanceEditIndex An arbitrary integer within the range from 1 to the value of the maximum instance that uniquely identifies a spanning tree instance.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.1`
mstInstanceEditVlansMap A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with vlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc., The most significant bit of each octet corresponds…	OctetStringr/w Constraints: `range: 0-4094`	`.1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.2`
mstInstanceEditVlansMap2k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 1024 through 2047. The first octet corresponds to VLANs with vlanIndex values of 1024 through 1031; the second octet to VLANs 1032 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.3`
mstInstanceEditVlansMap3k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 2048 through 3071. The first octet corresponds to VLANs with vlanIndex values of 2048 through 2055; the second octet to VLANs 2056 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.4`
mstInstanceEditVlansMap4k A string of octets containing one bit per VLAN for VLANS with vlanIndex values of 3072 through 4095. The first octet corresponds to VLANs with vlanIndex values of 3072 through 3079; the second octet to VLANs 3080 throug…	OctetStringr/w Constraints: `range: 0-128`	`.1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.5`
mstInstanceEditRemainingHops The remaining hop count for this MST instance.	SNMPv2-SMIInteger32 Constraints: `range: 0-128` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.5.6.6.1.6`

mstInstanceOperTable

table

.1.3.6.1.4.1.259.10.1.43.1.5.6.7 · 1 row entry · 5 columns

Open in standard view

The Multiple Spanning Tree region instance vlan mapped table.

mstInstanceOperEntry entry .1.3.6.1.4.1.259.10.1.43.1.5.6.7.1

A conceptual row containing the status of the MSTP instance.

Indexes

staLoopbackDetectionPortIfIndex

Column Syntax OID

mstInstanceOperIndex

An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.1

mstInstanceOperVlansMap

A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds…

OctetString

.1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.2

mstInstanceOperVlansMap2k

A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
throug…

OctetString

.1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.3

mstInstanceOperVlansMap3k

A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
throug…

OctetString

Enumerated Values:

1	auto
2	manual

.1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.4

mstInstanceOperVlansMap4k

A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
throug…

OctetString

Enumerated Values:

1	noRelease
2	release

.1.3.6.1.4.1.259.10.1.43.1.5.6.7.1.5

staLoopbackDetectionPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.5.8 · 1 row entry · 6 columns

Open in standard view

A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk

staLoopbackDetectionPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.5.8.1

A conceptual row of staLoopbackDetectionPortTable.

Indexes

No indexes recorded

Column Syntax OID

staLoopbackDetectionPortIfIndex

The port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.5.8.1.1

staLoopbackDetectionPortStatus

Status of the port on whether spanning tree loopback detection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.8.1.2

staLoopbackDetectionPortTrapStatus

The parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.5.8.1.3

staLoopbackDetectionPortReleaseMode

Setting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manu…

Enumerationr/w

Enumerated Values:

1	rx
2	tx
3	both

.1.3.6.1.4.1.259.10.1.43.1.5.8.1.4

staLoopbackDetectionPortRelease

Set this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.5.8.1.5

staLoopbackDetectionPortShutdownInterval

Set the interval used when loopback detection action is
shutdown.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.5.8.1.7

mirrorTable

table

.1.3.6.1.4.1.259.10.1.43.1.8.1 · 1 row entry · 4 columns

Open in standard view

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry entry .1.3.6.1.4.1.259.10.1.43.1.8.1.1

The conceptual row of mirrorTable.

Indexes

No indexes recorded

Column Syntax OID

mirrorDestinationPort

The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.8.1.1.1

mirrorSourcePort

The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.8.1.1.2

mirrorType

If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.8.1.1.3

mirrorStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Enumerated Values:

1	none
2	untagged
3	tagged

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.8.1.1.4

rspanTable

table

.1.3.6.1.4.1.259.10.1.43.1.8.3 · 1 row entry · 10 columns

Open in standard view

A table that contains the settings of RSPAN.

rspanEntry entry .1.3.6.1.4.1.259.10.1.43.1.8.3.1

The conceptual row of rspanTable.

Indexes

No indexes recorded

Column Syntax OID

rspanSessionId

The session ID that may specify an entry in the table which
contains destination port(s) information.

Integer32

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.1

rspanSrcTxPorts

Specifies the source port list in tx mode.

Q-BRIDGE-MIBPortListr/w

Enumerated Values:

1	up
2	down

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.2

rspanSrcRxPorts

Specifies the source port list in rx mode.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.3

rspanDstPort

The port number of a destination port. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.4

rspanDstPortTag

Specifies the traffic which is sent out from source port
with RSPAN VLAN ID or not.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.5

rspanSwitchRole

Specifies the role of current switch.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.6

rspanRemotePorts

Specifies the uplink port list.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.7

rspanRemoteVlanId

Specifies the ID of a RSPAN VLAN.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.8

rspanOperStatus

The operational status of the entry. A status of up(1)
means the setting of a session is complete and it has
started performing its function. A status of down(2) means
no function is performed because of incompleted ses…

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.9

rspanStatus

Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.8.3.1.10

igmpSnoopRouterCurrentTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.8 · 1 row entry · 3 columns

Open in standard view

Table for current router ports.

igmpSnoopRouterCurrentEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.8.1

Entry for current router ports.

Indexes

No indexes recorded

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopRou…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.9.8.1.1`
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.43.1.9.8.1.2`
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.43.1.9.8.1.3`

igmpSnoopRouterStaticTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.9 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

igmpSnoopRouterStaticEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.9.1

Entry for static router ports.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopRouterStaticVlanIndex

The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRou…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.9.1.1

igmpSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.9.9.1.2

igmpSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.9.9.1.3

igmpSnoopMulticastStaticTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.11 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.11.1

Entry for static multicast addresses.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.11.1.1

igmpSnoopMulticastStaticIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.9.11.1.2

igmpSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.9.11.1.3

igmpSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Constraints:
range: 1-255

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.9.11.1.4

igmpSnoopCurrentVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.14 · 1 row entry · 13 columns

Open in standard view

Table for enabling or disabling IGMP snooping per VLAN.

igmpSnoopCurrentVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.14.1

Entry for enabling or disabling IGMP snooping.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopCurrentVlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

Q-BRIDGE-MIBVlanIndex

Constraints:
range: 2-31744

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.1

igmpSnoopCurrentVlanStatus

Parameter to enable or disable IGMP snooping on this VLAN.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 10-31740

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.2

igmpSnoopCurrentVlanImmediateLeave

The parameter to enable or disable the Immediate-Leave feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Enumerated Values:

1	enabled
2	disabled
3	default

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.3

igmpSnoopCurrentVlanGeneralQuerySuppression

The parameter to enable or disable the general query suppresion
on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 1-3

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.4

igmpSnoopCurrentVlanLastMemQueryCount

Represents the number of queries sent by the switch before
it assumes there are no local members.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.5

igmpSnoopCurrentVlanLastMemQueryIntvl

The last member query interval is the max response time
inserted into group-specific queries sent in response to
leave group messages,and is also the the max response time
inserted into group-and-source-specific query m…

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.6

igmpSnoopCurrentVlanProxyAddress

Represents the address of queries sent by the switch.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.7

igmpSnoopCurrentVlanQueryIntvl

Represents the query interval of queries sent by the switch.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.8

igmpSnoopCurrentVlanQueryRespIntvl

Represents the query response interval of queries
sent by the switch.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.9

igmpSnoopCurrentVlanProxyReporting

Set this variable to enabled(1) to enable the feature.
Set this variable to disabled(2) to disable the feature.
Set this variable to default(3), the status of the feature
is decided by the global configuration.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.10

igmpSnoopCurrentVlanVersion

the version of igmp packets is supported by this vlan.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.11

igmpSnoopCurrentVlanVersionExclusive

Enable/disable control of the IGMP Snooping exclusive
supported version.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.12

igmpSnoopCurrentVlanImmediateLeaveByHostIp

The parameter to enable or disable the Immediate-Leave feature by host ip on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.9.14.1.14

igmpSnoopMulticastGroupTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.15 · 1 row entry · 6 columns

Open in standard view

Table for current multicast addresses.

igmpSnoopMulticastGroupEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.15.1

Entry for Group multicast addresses.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopMulticastGroupVlanIndex

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.9.15.1.1

igmpSnoopMulticastGroupIpAddress

IP address of multicast group.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.9.15.1.2

igmpSnoopMulticastGroupSourceIPAddress

Source IP address of source.

SNMPv2-SMIIpAddress

Enumerated Values:

1	permit
2	deny

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.9.15.1.3

igmpSnoopMulticastGroupPorts

The set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable.

Q-BRIDGE-MIBPortList

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.9.15.1.4

igmpSnoopMulticastGroupStatus

The set of ports which are static IGMP member ports.

Q-BRIDGE-MIBPortList

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.9.15.1.5

igmpSnoopMulticastGroupPortCount

The number of forwarding port in this group

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.15.1.6

igmpSnoopProfileTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.18 · 1 row entry · 3 columns

Open in standard view

The table for configuring the IGMP snooping profile.

igmpSnoopProfileEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.18.1

The entry for configuring the IGMP snooping profile.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopProfileId

The ID of the IGMP snooping profile.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.18.1.1

igmpSnoopProfileAction

The access mode of the IGMP snooping profile.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.9.18.1.2

igmpSnoopProfileStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Enumerated Values:

1	permit
2	deny

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.9.18.1.3

igmpSnoopProfileRangeTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.20 · 1 row entry · 5 columns

Open in standard view

The table for configuring the range of the IGMP snooping
profile.

igmpSnoopProfileRangeEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.20.1

The entry for configuring the range of the IGMP snooping
profile.

Indexes

igmpSnoopFilterPortIndex

Column Syntax OID

igmpSnoopProfileRangeProfileId

This is defined as igmpSnoopProfileId.

Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.9.20.1.1

igmpSnoopProfileRangeInetAddressType

The address type is associated with this agent.
Only ipv4(1) type is supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.9.20.1.2

igmpSnoopProfileRangeStartInetAddress

The specified addresses in the start of the controlled
IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.9.20.1.3

igmpSnoopProfileRangeEndInetAddress

The specified addresses in the end of the controlled
IP multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.9.20.1.4

igmpSnoopProfileRangeAction

The access mode of the IGMP snooping profile.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.9.20.1.5

igmpSnoopFilterPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.21 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in IGMP filtering.

igmpSnoopFilterPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.21.1

Entry for port configuration in IGMP filtering.

Indexes

No indexes recorded

Column	Syntax	OID
igmpSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.9.21.1.1`
igmpSnoopFilterPortProfileId The igmpSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the igmpSnoopProfileId object. If there is no corresponding entry in the igmpSnoopProfileTab…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.9.21.1.2`

igmpSnoopThrottlePortTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.22 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in IGMP throttling.

igmpSnoopThrottlePortEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.22.1

Entry for port configuration in IGMP throttling.

Indexes

igmpSnoopPortIndex

Column Syntax OID

igmpSnoopThrottlePortIndex

The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.22.1.1

igmpSnoopThrottlePortRunningStatus

Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive.

SNMPv2-TCTruthValue

Enumerated Values:

1	enable
2	disable

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.9.22.1.2

igmpSnoopThrottlePortAction

The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to th…

Enumerationr/w

Enumerated Values:

1	enable
2	disable

.1.3.6.1.4.1.259.10.1.43.1.9.22.1.3

igmpSnoopThrottlePortMaxGroups

The maximum number of IGMP groups that the interface can join.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.9.22.1.4

igmpSnoopThrottlePortCurrentGroups

The current number of IGMP groups that the interface has joined.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.9.22.1.5

igmpSnoopPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.27 · 1 row entry · 15 columns

Open in standard view

Table of IGMP Snooping service per port.

igmpSnoopPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.27.1

Entry of IGMP Snooping service per port.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopPortIndex

The port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the …

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.1

igmpSnoopQueryDrop

Parameter to enable or disable dropping IGMP Query packet.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.3

igmpSnoopMulticastDataDrop

Parameter to enable or disable dropping IP multicast data

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.4

igmpSnoopPortNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.5

igmpSnoopPortNumJoinSend

Number of join send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.6

igmpSnoopPortNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.7

igmpSnoopPortNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.8

igmpSnoopPortNumLeavesSend

Number of leave send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.9

igmpSnoopPortNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.10

igmpSnoopPortNumGeneralQuerySend

Number of general query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.11

igmpSnoopPortNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.12

igmpSnoopPortNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Constraints:
range: 512-512

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.13

igmpSnoopPortNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.14

igmpSnoopPortNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.15

igmpSnoopPortClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.9.27.1.16

igmpSnoopQueryDropTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.30 · 1 row entry · 2 columns

Open in standard view

Table of IGMP Snooping query drop per vlan and per vlan configuration.

igmpSnoopQueryDropEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.30.1

Entry of IGMP Snooping service per port and per VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
igmpSnoopQueryDropPortIndex The port and the trunk (excluding trunk members) interface of the igmpSnoopPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the …	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.9.30.1.1`
igmpSnoopQueryDropVlanBitmap The VLAN bitmap which query drop applied on this port. If all zero, it means disable, For all VLAN, please use igmpSnoopPortTable to configure.	OctetStringr/w	`.1.3.6.1.4.1.259.10.1.43.1.9.30.1.2`

igmpSnoopVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.9.33 · 1 row entry · 13 columns

Open in standard view

Table of IGMP Snooping service per port.

igmpSnoopVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.9.33.1

Entry of IGMP Snooping service per VLAN.

Indexes

No indexes recorded

Column Syntax OID

igmpSnoopVlanIndex

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.1

igmpSnoopVlanNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.2

igmpSnoopVlanNumJoinSend

Number of join send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.3

igmpSnoopVlanNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.4

igmpSnoopVlanNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.5

igmpSnoopVlanNumLeavesSend

Number of leave send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.6

igmpSnoopVlanNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.7

igmpSnoopVlanNumGeneralQuerySend

Number of general query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.8

igmpSnoopVlanNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Constraints:
range: 1-4093

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.9

igmpSnoopVlanNumSepcificQuerySend

Number of specific query send

SNMPv2-SMIUnsigned32

Enumerated Values:

1	notSpecify
2	text
3	hex

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.10

igmpSnoopVlanNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Constraints:
range: 1-32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.11

igmpSnoopVlanNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.12

igmpSnoopVlanClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.9.33.1.13

dhcpcInterfaceTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1 · 1 row entry · 3 columns

Open in standard view

Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs).

dhcpcInterfaceEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1

Entry for DHCP client information listed by interface.

Indexes

No indexes recorded

Column	Syntax	OID
dhcpcIfIndex This is defined by ifIndex in the IF-MIB.(static vlan if index)	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1.1`
dhcpcIfVendorClassIdMode Whether the vendor class ID is in text mode or in Hex mode.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1.4`
dhcpcIfVendorClassId The value that the DHCP client sets in the vendor class_id option of DHCPDISCOVER and DHCPREQUEST messages. This value may be used by DHCP servers to identify vendor classof the client.	OctetStringr/w	`.1.3.6.1.4.1.259.10.1.43.1.10.11.1.1.1.1.5`

dhcpRelayServerInetAddrTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.4 · 1 row entry · 4 columns

Open in standard view

The role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify Relay Server IP
address and then restart DHCP Relay. This Table is to specify Relay
Server IP address,the maximum numbers of server IP address user can
specify is 5.To Restart DHCP Relay, please use the dhcpRelayRestart
variable.

dhcpRelayServerInetAddrEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1

A conceptual row of dhcpRelayServerAddrTable.

Indexes

No indexes recorded

Column Syntax OID

dhcpRelayServerInetAddrIfIndex

The VLAN interface being used by this table entry.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.1

dhcpRelayServerInetAddrIndex

The Index of the Relay server IP address.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.2

dhcpRelayServerInetAddressType

The INET address type of the relay server.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.3

dhcpRelayServerInetAddress

The INET address of the relay server.

INET-ADDRESS-MIBInetAddressr/w

Constraints:
range: 1-4094

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.4.1.4

dhcpv6RelayServerInetAddrTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.5 · 1 row entry · 2 columns

Open in standard view

The role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify Relay Server IPv6
address. This Table is to specify Relay Server IPv6 address,
the maximum numbers of server IPv6 address user can specify is 5.

dhcpv6RelayServerInetAddrEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.11.2.5.1

A conceptual row of dhcpv6RelayServerAddrTable.

Indexes

No indexes recorded

Column	Syntax	OID
dhcpv6RelayServerInetAddrIfIndex The VLAN interface being used by this table entry.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.10.11.2.5.1.1`
dhcpv6RelayServerInetAddress The INET address of the relay server.	INET-ADDRESS-MIBInetAddressIPv6r/w Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.259.10.1.43.1.10.11.2.5.1.2`

dhcpv6RelayServerVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.6 · 1 row entry · 3 columns

Open in standard view

The role of DHCP Relay Agent is to forward requests and replies
between server and client when they are not in the same subnet. To
enable DHCP Relay service user needs to specify multicast Relay Server Vlan.
This Table is to specify multicast Relay Server Vlan.

dhcpv6RelayServerVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.11.2.6.1

A conceptual row of dhcpv6RelayServerVlanTable.

Indexes

No indexes recorded

Column Syntax OID

dhcpv6RelayServerVlanIfIndex

The relay VLAN interface.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.6.1.1

dhcpv6RelayServerMcastIfIndex

The multicast relay destination VLAN interface.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.6.1.2

dhcpv6RelayServerVlanEnable

The status of multicast relay destination VLAN interface.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 1-16

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.10.11.2.6.1.3

dhcpOption82RelayServerAddrTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.11.4.6 · 1 row entry · 2 columns

Open in standard view

This table is to specify relay server IP address,
the maximum number of server IP addresses user can specify is 5.

dhcpOption82RelayServerAddrEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.11.4.6.1

A conceptual row of dhcpOption82RelayServerAddrTable.

Indexes

No indexes recorded

Column	Syntax	OID
dhcpOption82RelayServerAddrIndex The index of the relay server IP address.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.10.11.4.6.1.1`
dhcpOption82RelayServerAddrServerIp The IP address of the relay server.	SNMPv2-SMIIpAddressr/w Constraints: `range: 1-4094` Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.43.1.10.11.4.6.1.2`

pingHistoryTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.15.10 · 1 row entry · 2 columns

Open in standard view

Contains the executive result information for the ping
operation.

pingHistoryEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.15.10.1

A conceptual row in the pingHistory table.

Indexes

No indexes recorded

Column Syntax OID

pingHistoryIndex

A new entry in this table is created when the result of
a ping probe is determined. The old entries will be cleared
when a new ping action is started.

Integer32

Enumerated Values:

0	unknownType
1	primary
2	secondary

.1.3.6.1.4.1.259.10.1.43.1.10.15.10.1.1

pingHistoryResponse

This variable represents the round trip time and is
measured in milliseconds. The variable is the difference
between received time and sent time for a ping probe. If
the difference value is more than the time-out value …

millisecondsSNMPv2-SMIInteger32

Enumerated Values:

1	unnumbered
2	notUnnumbered

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.10.15.10.1.2

iPAddrTable

table

.1.3.6.1.4.1.259.10.1.43.1.10.16 · 1 row entry · 6 columns

Open in standard view

A table of iPAddrEntry.

iPAddrEntry entry .1.3.6.1.4.1.259.10.1.43.1.10.16.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

No indexes recorded

Column Syntax OID

iPAddrIfIndex

The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.10.16.1.1

iPAddrIPAddress

The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what …

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.10.16.1.2

iPAddrSubnetMask

The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out wha…

SNMPv2-SMIIpAddress

Enumerated Values:

1	user
2	bootp
3	dhcp

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.10.16.1.3

iPAddrPrimaryInterface

Whether this is a primary interface.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.10.16.1.4

iPAddrUnnumbered

Whether this is an unnumbered interface.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.10.16.1.5

iPAddrStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-40

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.10.16.1.6

vlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.1 · 1 row entry · 2 columns

Open in standard view

Table for VLAN configuration.

vlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.1.1

Entry for VLAN configuration.

Indexes

No indexes recorded

Column	Syntax	OID
vlanIndex Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.12.1.1.1`
vlanAddressMethod Method to get the IP address.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.12.1.1.2`

vlanPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.2 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in VLAN.

vlanPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.2.1

Entry for port configuration in VLAN.

Indexes

No indexes recorded

Column	Syntax	OID
vlanPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRIDG…	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.12.2.1.1`
vlanPortMode This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.12.2.1.2`

voiceVlanOuiTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.6.1 · 1 row entry · 4 columns

Open in standard view

A table containing the mac address which can be identified
by Voice VLAN.

voiceVlanOuiEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.6.1.1

A table containing the mac address which can be identified
by Voice VLAN.

Indexes

No indexes recorded

Column Syntax OID

voiceVlanOuiAddress

MAC address can be identified by voice vlan.

SNMPv2-TCMacAddress

Enumerated Values:

1	auto
2	manual
3	none

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.1

voiceVlanOuiMask

The mask of MAC address.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.2

voiceVlanOuiDescription

The description of OUI.

OctetStringr/w

Constraints:
range: 0-6

.1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.3

voiceVlanOuiStatus

Current operation status of the row.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.12.6.1.1.4

voiceVlanPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.6.7 · 1 row entry · 7 columns

Open in standard view

A list of voice VLAN port entries.

voiceVlanPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.6.7.1

An entry containing Voice VLAN port information,
which is applicable to a Voice VLAN enabled interface.

Indexes

No indexes recorded

Column Syntax OID

voiceVlanPortIfIndex

The index of interface on which Voice VLAN function
is enabled.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.1

voiceVlanPortMode

Voice VLAN configuration mode status.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.2

voiceVlanPortSecurity

If the security is enabled, the port only allows voice
traffic for the Voice VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.3

voiceVlanPortPriority

The priority of the voice vlan traffic in the port.

Integer32r/w

Enumerated Values:

1	none
2	dot1qTunnel
3	dot1qTunnelUplink

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.4

voiceVlanPortRuleOui

The address of voice device is learned from
OUI table.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 2048-65535

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.5

voiceVlanPortRuleLldp

The address of voice device is learned from
LLDP discovery.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.6

voiceVlanPortRemainAge

Remaining aging time, the unit of which is minute.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.12.6.7.1.7

vlanDot1qTunnelPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.9 · 1 row entry · 4 columns

Open in standard view

Table for port configuration in 802.1Q Tunneling.

vlanDot1qTunnelPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.9.1

Entry for port configuration in 802.1Q Tunneling.

Indexes

No indexes recorded

Column Syntax OID

vlanDot1qTunnelPortIndex

The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.12.9.1.1

vlanDot1qTunnelPortMode

This variable sets the 802.1Q Tunneling mode.
Setting it to none(1) indicates no mode in this port.
Setting it to access(2) sets as dot1q-tunnel mode port which links to customer.
Setting it to uplink(3) sets as dot1q-t…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.12.9.1.2

vlanDot1qTunnelPortEtherType

TPID for 802.1Q encapsulation. It's used to select a nonstandard
(nondefault) 2-byte ethertype to identify 802.1Q tagged frames.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.12.9.1.3

vlanDot1qTunnelPortPriorityMapStatus

Status of priority mapping. Set to enabled(1) to use 802.1p
priority of inner tag as packet's priority instead of using
outer tag.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.12.9.1.4

dot1vProtocolExPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.10 · 1 row entry · 1 columns

Open in standard view

A table that contains protocol Vlan priority information.

dot1vProtocolExPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.10.1

A list of protocol VLAN user priority sets for each port.

Indexes

No indexes recorded

Column	Syntax	OID
dot1vProtocolExPortGroupPriority Specifies the priority in the added tag for qualified frames.	Integer32r/w	`.1.3.6.1.4.1.259.10.1.43.1.12.10.1.1`

macVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.11 · 1 row entry · 5 columns

Open in standard view

A table that contains the settings for MAC-based VLAN.

macVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.11.1

A conceptual row in the macVlanTable.

Indexes

subnetVlanMask subnetVlanIpAddress

Column Syntax OID

macVlanMacAddress

The MAC address that may specify an entry in the table
which contains MAC-based VLAN information.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.12.11.1.1

macVlanId

Specifies the VLAN ID which the MAC address associates
with.

Q-BRIDGE-MIBVlanIdr/w

Textual Convention: Q-BRIDGE-MIBVlanId Integer32

Type Constraints:
range: 1..4094

.1.3.6.1.4.1.259.10.1.43.1.12.11.1.2

macVlanPriority

Specifies the priority whcich the MAC address associates
with.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.10.1.43.1.12.11.1.3

macVlanStatus

Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.

ValidStatusr/w

Constraints:
range: 0-7

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.12.11.1.4

macVlanMacMask

The MAC address mask that may specify an entry in the table
which contains MAC-based VLAN information.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.12.11.1.5

subnetVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.13 · 1 row entry · 5 columns

Open in standard view

A table that contains the settings for IP subnet-based
VLAN.

subnetVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.13.1

A conceptual row in the subnetVlanTable.

Indexes

No indexes recorded

Column Syntax OID

subnetVlanIpAddress

The IPv4 address of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnet…

SNMPv2-SMIIpAddress

Enumerated Values:

1	destroy
2	vlan
3	rspanVlan

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.12.13.1.1

subnetVlanMask

The netmask of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanI…

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.12.13.1.2

subnetVlanId

Specifies the VLAN ID which the subnet associates with.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.12.13.1.3

subnetVlanPriority

Specifies the priority whcich the subnet associates with.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.12.13.1.4

subnetVlanStatus

Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry.

ValidStatusr/w

Enumerated Values:

135	l2vlan
136	l3ipvlan

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.12.13.1.5

vlanStaticExtTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.15 · 1 row entry · 1 columns

Open in standard view

The extension table of dot1qVlanStaticTable. This table
enhances the original table with extra
vlanStaticExtRspanStatus to create and destroy RSPAN
VLAN(s).

vlanStaticExtEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.15.1

A conceptual row in the vlanStaticExtTable.

Indexes

prioWrrPortIfIndex prioWrrPortTrafficClass

Column	Syntax	OID
vlanStaticExtRspanStatus Displays type of a VLAN is vlan(2) or rspanVlan(3). Set this to destroy(1) to destroy a RSPAN VLAN. Set this to rspanVlan(3) to create a RSPAN VLAN. Setting this to vlan(2) is not allowed.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.12.15.1.1`

vlanStaticTable

table

.1.3.6.1.4.1.259.10.1.43.1.12.17 · 1 row entry · 2 columns

Open in standard view

Table for static VLAN configuration including VLAN aggregation support.

vlanStaticEntry entry .1.3.6.1.4.1.259.10.1.43.1.12.17.1

Static information for a VLAN configured on the device by (local or
network) management.

Indexes

No indexes recorded

Column	Syntax	OID
vlanStaticIndex The VLAN ID of the VLAN.	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.10.1.43.1.12.17.1.1`
vlanStaticInterfaceType The interface type of the VLAN (there is a subtype of IANAifType). l2vlan(135) refers to L2 interface and can't accept any L3 related configuration. l3ipvlan(136) refers to L3 interface and can accept L3 related configu…	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.12.17.1.2`

prioWrrPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.13.12 · 1 row entry · 4 columns

Open in standard view

Table for per port weighted round robin (WRR).

prioWrrPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.13.12.1

Entry for per port weighted round robin (WRR).

Indexes

No indexes recorded

Column Syntax OID

prioWrrPortIfIndex

The port interface of the prioWrrPortEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Enumerated Values:

1	wrr
2	strict
4	strict-wrr

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.13.12.1.1

prioWrrPortTrafficClass

Traffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.13.12.1.2

prioWrrPortWeight

Weight for this entry. Value of the object should be
ignored when prioQueueMode is strictAndWrr(3), and
prioWrrPortStrictStatus is enabled(1).

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.13.12.1.3

prioWrrPortStrictStatus

This object is used when prioSchedModePort is
strictAndWrr(4).

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.13.12.1.4

prioSchedModePortTable

table

.1.3.6.1.4.1.259.10.1.43.1.13.15 · 1 row entry · 2 columns

Open in standard view

Table for per port scheduling mode.

prioSchedModePortEntry entry .1.3.6.1.4.1.259.10.1.43.1.13.15.1

Entry for per port scheduling mode.

Indexes

No indexes recorded

Column	Syntax	OID
prioSchedModePortIndex The port interface of the prioSchedModePortEntry.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.13.15.1.1`
prioSchedModePort The scheduling mode status of ethernet port. wrr(1),strict(2), strict-wrr(4)	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.13.15.1.2`

rateLimitPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.1.2 · 1 row entry · 6 columns

Open in standard view

Table for rate limit of each port.

rateLimitPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.1.2.1

Entry for rate limit of each port.

Indexes

No indexes recorded

Column Syntax OID

rlPortIndex

The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.1

rlPortInputStatus

Whether input rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.6

rlPortOutputStatus

Whether output rate limit is enabled for this port.

P-BRIDGE-MIBEnabledStatusr/w

Enumerated Values:

0	cos
1	ipPrecedence
2	dscp

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.7

rlPortInputLimitInKilo

Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.10

rlPortOutputLimitInKilo

Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.11

rlPortLimitInKiloResolution

Present the rate's resolution. Its unit is kilobits per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.1.2.1.12

prioIfClassificationModeTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.3.2 · 1 row entry · 2 columns

Open in standard view

Table for setting the interface Qos mapping classification mode.

prioIfClassificationModeEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.3.2.1

Entry for setting the interface Qos mapping classification mode.

Indexes

No indexes recorded

Column	Syntax	OID
prioIfClassificationModeIf The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Constraints: `range: 0-7` Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.16.3.2.1.1`
prioIfClassificationModeStatus The Qos mapping classification mode of the interface. cos mode means that the internal priority is mapped from priority field of packet's VLAN tag if a VLAN tag exists; IP precedence mode means that the internal priorit…	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.16.3.2.1.2`

prioIngressCosToQueueTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.3.10 · 1 row entry · 4 columns

Open in standard view

Table for cos to queue mapping.

prioIngressCosToQueueEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.3.10.1

Entry for cos to queue mapping.

Indexes

No indexes recorded

Column	Syntax	OID
prioIngressCosToQueueIfValue The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Constraints: `range: 0-63` Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.16.3.10.1.1`
prioIngressCosToQueueCosValue The cos value on VLAN tag of inject packet.	Integer32 Constraints: `range: 0-7`	`.1.3.6.1.4.1.259.10.1.43.1.16.3.10.1.2`
prioIngressCosToQueueCfiValue The cfi value on VLAN tag of inject packet.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.16.3.10.1.3`
prioIngressCosToQueueQueueValue The queue value which is mapped from the (cos,cfi) value of QoS label.	Integer32r/w	`.1.3.6.1.4.1.259.10.1.43.1.16.3.10.1.4`

prioIngressDscpToQueueTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.3.11 · 1 row entry · 3 columns

Open in standard view

Table for dscp to queue mapping.

prioIngressDscpToQueueEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.3.11.1

Entry for dscp to queue mapping.

Indexes

No indexes recorded

Column	Syntax	OID
prioIngressDscpToQueueIfValue The port or trunk interface of the device. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Constraints: `range: 0-64` Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.16.3.11.1.1`
prioIngressDscpToQueueDscpValue The dscp value on VLAN tag of inject packet.	Integer32 Constraints: `range: 0-32`	`.1.3.6.1.4.1.259.10.1.43.1.16.3.11.1.2`
prioIngressDscpToQueueQueueValue The queue value which is mapped from the dscp value of QoS label.	Integer32r/w	`.1.3.6.1.4.1.259.10.1.43.1.16.3.11.1.3`

diffServPolicyMapTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.10 · 1 row entry · 5 columns

Open in standard view

Table for policy map.

diffServPolicyMapEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.10.1

Entry for policy map.

Indexes

diffServPolicyMapElementIndex

Column Syntax OID

diffServPolicyMapIndex

An index that uniquely identifies an entry in this table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.1

diffServPolicyMapName

The name of this entry.

OctetStringr/w

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.2

diffServPolicyMapDescription

The description of this entry.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.3

diffServPolicyMapElementIndexList

The octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry.

OctetString

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.4

diffServPolicyMapStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:

- 'active', which indi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.10.1.5

diffServPolicyMapElementTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.12 · 1 row entry · 5 columns

Open in standard view

Table for policy map element.

diffServPolicyMapElementEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.12.1

Entry for policy map element.

Indexes

diffServClassMapIndex

Column Syntax OID

diffServPolicyMapElementIndex

An index that uniquely identifies an entry in this table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.1

diffServPolicyMapElementClassMapIndex

Specifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex.

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.2

diffServPolicyMapElementMeterIndex

Specifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is
…

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-64

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.3

diffServPolicyMapElementActionIndex

Specifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex.

Integer32r/w

Enumerated Values:

1	matchAny
2	matchAll

.1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.4

diffServPolicyMapElementStatus

This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:

The status column has six defined values:

- 'acti…

SNMPv2-TCRowStatusr/w

Constraints:
range: 0-255

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.12.1.5

diffServClassMapTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.13 · 1 row entry · 7 columns

Open in standard view

Table for class map.

diffServClassMapEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.13.1

Entry for class map.

Indexes

No indexes recorded

Column Syntax OID

diffServClassMapIndex

An index that uniquely identifies an entry in this table.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.1

diffServClassMapName

The name of this entry.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.2

diffServClassMapDescription

The description of this entry.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.3

diffServClassMapMatchType

The map match type of this entry.

Enumerationr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.4

diffServClassMapElementIndexTypeList

The octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
differServCla…

OctetString

Enumerated Values:

1	mac
2	ipstandard
3	ipextended
4	ipv6standard
5	ipv6extended
6	arp

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.5

diffServClassMapElementIndexList

The octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The …

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.6

diffServClassMapStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.13.1.7

diffServAclTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.15 · 1 row entry · 5 columns

Open in standard view

Table for ACL.

diffServAclEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.15.1

Entry for ACL.

Indexes

diffServIpAceIndex

Column Syntax OID

diffServAclIndex

An index that uniquely identifies an entry in the ACL
table.

Integer32

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.1

diffServAclName

The name of this entry.

OctetStringr/w

Enumerated Values:

1	standard
2	extended

.1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.2

diffServAclType

The type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be auto-
unbound from the diffServPortTable and the
di…

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.3

diffServAclAceIndexList

The octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate th…

OctetString

.1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.4

diffServAclStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

- 'active', which indicates that the conceptual row is
availa…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.15.1.5

diffServIpAceTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.17 · 1 row entry · 19 columns

Open in standard view

Table for IP ACE.

diffServIpAceEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.17.1

Entry for IP ACE.

Indexes

No indexes recorded

Column Syntax OID

diffServIpAceIndex

An index that uniquely identifies an entry in the IP ACE
table.

Integer32

Constraints:
range: 0-256

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.1

diffServIpAceType

The specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.2

diffServIpAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.3

diffServIpAceSourceIpAddr

The specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Enumerated Values:

1	noOperator
2	equal
3	range

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.4

diffServIpAceSourceIpAddrBitmask

The specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object.

SNMPv2-SMIIpAddressr/w

Constraints:
range: 0-65535

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.5

diffServIpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if th…

SNMPv2-SMIIpAddressr/w

Constraints:
range: 0-65535

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.6

diffServIpAceDestIpAddrBitmask

The specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

SNMPv2-SMIIpAddressr/w

Enumerated Values:

1	noOperator
2	equal
3	range

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.7

diffServIpAceProtocol

The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGM…

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.8

diffServIpAcePrec

Specifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is …

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.9

diffServIpAceDscp

Specifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal to…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.11

diffServIpAceSourcePortOp

Indicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffSe…

Enumerationr/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.12

diffServIpAceMinSourcePort

If the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1).

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.13

diffServIpAceSourcePortBitmask

If the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1).

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.15

diffServIpAceDestPortOp

Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is …

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.16

diffServIpAceMinDestPort

If the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1).

Integer32r/w

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.17

diffServIpAceDestPortBitmask

If the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1).

Integer32r/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.19

diffServIpAceControlCode

Indicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is
e…

Integer32r/w

Enumerated Values:

1	any
2	untagged-Eth2
3	untagged802Dot3
4	tagggedEth2
5	tagged802Dot3

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.20

diffServIpAceControlCodeBitmask

Indicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not…

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.21

diffServIpAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.17.1.22

diffServMacAceTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.18 · 1 row entry · 17 columns

Open in standard view

Table for MAC ACE.

diffServMacAceEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.18.1

Entry for MAC ACE.

Indexes

No indexes recorded

Column Syntax OID

diffServMacAceIndex

An index that uniquely identifies an entry in the MAC ACE
table.

Integer32

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.1

diffServMacAceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.2

diffServMacAcePktformat

Used to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Constraints:
range: 0-4095

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.3

diffServMacAceSourceMacAddr

Indicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this…

SNMPv2-TCMacAddressr/w

Enumerated Values:

1	noOperator
2	equal
3	range

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.4

diffServMacAceSourceMacAddrBitmask

The specified source MAC address mask.

SNMPv2-TCMacAddressr/w

Constraints:
range: 0-65535

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.5

diffServMacAceDestMacAddr

Indicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the …

SNMPv2-TCMacAddressr/w

Constraints:
range: 0-65535

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.6

diffServMacAceDestMacAddrBitmask

The specified destination MAC address mask.

SNMPv2-TCMacAddressr/w

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.7

diffServMacAceVidOp

Indicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1).

Enumerationr/w

Enumerated Values:

1	noOperator
2	equal
3	range

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.8

diffServMacAceMinVid

Indicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3).

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.9

diffServMacAceVidBitmask

The bit mask of the VID. The default value is 0.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.10

diffServMacAceEtherTypeOp

Indicates how a packet's ether type is to be compared.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.12

diffServMacAceEtherTypeBitmask

The bit mask of Ether type. The default value is 0.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.13

diffServMacAceMinEtherType

Indicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3).

Integer32r/w

Constraints:
range: 1-512

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.14

diffServMacAceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Enumerated Values:

0	actionPktNewPri
11	actionPktNewDscp

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.16

diffServMacAceCosOp

Indicates how a packet's CoS is compared.
If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing, and
diffServMacAceCosBitmask is used as the bitmask of the CoS…

Enumerationr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.17

diffServMacAceCosBitmask

Indicates the bitmask of the CoS value if the object type of
diffServMacAceCosOp is equal(2). The default value is 0.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.18

diffServMacAceMinCos

If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos indicates the lower bound of…

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.43.1.16.4.18.1.19

diffServActionTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.19 · 1 row entry · 5 columns

Open in standard view

Table for action.

diffServActionEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.19.1

Entry for action.

Indexes

diffServActionIndex

Column Syntax OID

diffServActionIndex

An index that uniquely identifies an entry in the
action table.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.1

diffServActionList

The bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri and actionPktNewDscp can not be
enabled at the same time on the entry. The
actionRedPktNewDscp and actionRedDrop …

Bitsr/w

Enumerated Values:

0	default
8	rate

.1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.2

diffServActionPktNewPri

Specifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set.

Integer32r/w

Constraints:
range: 16-1000000

.1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.3

diffServActionStatus

This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:

The status column has six defined values:

- 'active', whi…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.11

diffServActionPktNewDscp

Specifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.19.1.13

diffServMeterTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.20 · 1 row entry · 4 columns

Open in standard view

Table for meter.

diffServMeterEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.20.1

Entry for meter.

Indexes

No indexes recorded

Column Syntax OID

diffServMeterIndex

An entry that describes a single set of token bucket
parameters.

SNMPv2-SMIInteger32

Enumerated Values:

1	standard
2	extended

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.1

diffServMeterModel

The Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.2

diffServMeterRate

The token-bucket rate, in kilobits per second (kbps).

Integer32r/w

Constraints:
range: 0-16

.1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.3

diffServMeterStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Constraints:
range: 0-128

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.20.1.6

diffServIpv6AceTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.21 · 1 row entry · 16 columns

Open in standard view

Table for IPv6 ACE.

diffServIpv6AceEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.21.1

Entry fo IPv6 ACE.

Indexes

No indexes recorded

Column Syntax OID

diffServIpv6AceIndex

An index that uniquely identifies an entry in the IPv6 table.

Integer32

Constraints:
range: 0-255

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.1

diffServIpv6AceType

The specified IP v6 ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0.

Enumerationr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.2

diffServIpv6AceAccess

Indicates the action to be taken if a packet matches this
ACE.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.3

diffServIpv6AceSourceIpAddr

Specifies the source IPv6 address.

OctetStringr/w

Enumerated Values:

1	noOperator
2	equal

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.4

diffServIpv6AceSourceIpAddrPrefixLen

The length (in bits) associated with the source IPv6 address
prefix of this entry.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.5

diffServIpv6AceDestIpAddr

Specifies the destination IPv6 address. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1).

OctetStringr/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.6

diffServIpv6AceDestIpAddrPrefixLen

The length (in bits) associated with the destination IPv6
address prefix of this entry. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1).

Integer32r/w

Enumerated Values:

1	noOperator
2	equal

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.7

diffServIpv6AceNextHeader

Specifies the next header to match against. This object may not
be modified if the associated diffServIpv6AceType object is equal to
standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.8

diffServIpv6AceDscp

Specifies the DSCP value to match against. This object may not
be modified if the associated diffServIpv6AceType object is
equal to standard(1).

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.9

diffServIpv6AceStatus

This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:

The status column has six defined values:

- 'active…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.11

diffServIpv6AceSourcePortOp

Indicates how a packet's source TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the source
TCP/UDP port number. equal(2), which uses the
diff…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.13

diffServIpv6AceSourcePort

If the diffServIpv6AceSourcePortOp is equal(2), this
indicates the TCP/UDP port number value.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.14

diffServIpv6AceSourcePortBitmask

If the diffServIpv6AceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceSourcePort.

Integer32r/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.15

diffServIpv6AceDestPortOp

Enumerationr/w

Enumerated Values:

1	request
2	response
3	both

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.16

diffServIpv6AceDestPort

If the diffServIpv6AceDestPortOp is equal(2), this
indicates the TCP/UDP port number value.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.17

diffServIpv6AceDestPortBitmask

If the diffServIpv6AceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpv6AceDestPort.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.21.1.18

diffServArpAceTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.23 · 1 row entry · 13 columns

Open in standard view

The conceptual table of all of diffServArpAceEntry.

diffServArpAceEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.23.1

The conceptual row for diffServArpAceTable.

Indexes

No indexes recorded

Column Syntax OID

diffServArpAceIndex

The unique index of an ACE within an ACL.

Integer32

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.1

diffServArpAceAction

Indicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, diffServArpAceStatus, is
active(1).

Enumerationr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.2

diffServArpAcePktType

Indicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, diffServArpAceStatus, is active(1).

Enumerationr/w

Constraints:
range: 6-6

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.3

diffServArpAceSourceIpAddr

The specified source ARP address. The packet's source
address is AND'ed with the value of
diffServArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the s…

SNMPv2-SMIIpAddressr/w

Constraints:
range: 6-6

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.4

diffServArpAceSourceIpAddrBitmask

The specified source ARP address mask. The packet's
destination address is AND'ed with the value of
diffServArpAceSourceIpAddr and then compared against the
value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.5

diffServArpAceDestIpAddr

The specified destination IP address. The packet's
destination address is AND'ed with the value of
diffServArpAceDestIpAddrBitmask and then compared
against the value of this object.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.6

diffServArpAceDestIpAddrBitmask

The specified destination IP address mask.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.7

diffServArpAceSourceMacAddr

Indicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this ob…

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.8

diffServArpAceSourceMacAddrBitmask

The specified source MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.9

diffServArpAceDestMacAddr

Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of…

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.10

diffServArpAceDestMacAddrBitmask

The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.11

diffServArpAceLogStatus

Indicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1).

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.12

diffServArpAceStatus

The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…

SNMPv2-TCRowStatusr/w

Enumerated Values:

ingress

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.23.1.13

diffServArpTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.24 · 1 row entry · 1 columns

Open in standard view

The conceptual table of all of diffServArpEntry.

diffServArpEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.24.1

The conceptual row for diffServArpTable.

Indexes

No indexes recorded

Column	Syntax	OID
diffServArpAclName The name of an ACL. Within a feature, a unique name is used to identify the list to which the entry belongs in the device.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.16.4.24.1.1`

diffServAclHwCounterTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.26 · 1 row entry · 5 columns

Open in standard view

Table for differentiated services hardware counter on
each port.

diffServAclHwCounterEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.26.1

Entry for differentiated services hardware counter on
each port.

Indexes

diffServPolicyMapPortIfIndex diffServPolicyMapPortDirection

Column Syntax OID

diffServAclHwCounterIfIndex

This object is the interface index of diffServPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.1

diffServAclHwCounterDirection

Indicates a particular direction of traffic.

Enumeration

Enumerated Values:

ingress

.1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.2

diffServAclHwCounterAclIndex

An index that uniquely identifies an entry in the ACL
table.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.3

diffServAclHwCounterAceIndex

An index that uniquely identifies an entry of an ACL.
This entry might be a compressed ACE (which index is
bigger than SYS_ADPT_MAX_NBRS_OF_ACE_OF_SYSTEM) with
multiple user configured ACEs, and the index of
compressed …

Integer32

.1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.4

diffServAclHwCounterAceHitCount

Specifies the hardware counter of an ACE entry.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.16.4.26.1.5

diffServPolicyMapPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.27 · 1 row entry · 4 columns

Open in standard view

Table for policy map of each port.

diffServPolicyMapPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.27.1

Entry for diffServPolicyMapPortTable.

Indexes

No indexes recorded

Column Syntax OID

diffServPolicyMapPortIfIndex

This object is the interface index of DiffServPolicyMapPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Enumerated Values:

ingress

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.1

diffServPolicyMapPortDirection

Indicates this policy map effect to
which direction of traffic.

Enumeration

Enumerated Values:

1	mac
2	ip
3	ipv6

.1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.2

diffServPolicyMapPortPolicyMapIndex

Specifies the policy map index binded to the interface.
The policy map identified by a particular value of
this index is associated with the same DiffServPolicyMapEntry
as identified by the same value of diffServPolicyM…

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.3

diffServPolicyMapPortStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Constraints:
range: 1-32

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.27.1.4

diffServAccessGroupTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.28 · 1 row entry · 7 columns

Open in standard view

Table for specifies access group
for ACL on each port.

diffServAccessGroupEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.28.1

Entry for diffServAccessGroupTable.

Indexes

No indexes recorded

Column Syntax OID

diffServAccessGroupIfIndex

This object is the interface index of diffServAccessGroupEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB. If support glo…

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.1

diffServAccessGroupDirection

Indicates this access group effect to
which direction of traffic.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.2

diffServAccessGroupType

Specifies the access group type,
only support bind one ACL per type on a port.

Enumeration

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.3

diffServAccessGroupAclIndex

Specifies the ACL index apply to this access
group. The index uniquely identifies an
entry in diffServAclTable.

SNMPv2-SMIInteger32r/w

Constraints:
range: 0-0

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.4

diffServAccessGroupTimeRangeName

The name of the time range entry bound to
the access group. This object should be
equal to one of the timeRangeName objects
in timeRangeTable.

OctetStringr/w

Constraints:
range: 0-11

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.5

diffServAccessGroupCounterStatus

The acl counter enable status of this
access group.

P-BRIDGE-MIBEnabledStatusr/w

Enumerated Values:

0	macAcl
1	ipAcl
2	ipv6StdAcl
3	ipv6ExtAcl
4	macDiffServ
5	ipDiffServ
6	ipv6StdDiffServ
7	ipv6ExtDiffServ
8	egressMacAcl
9	egressIpAcl
10	egressIpv6StdAcl
11	egressIpv6ExtAcl
12	egressMacDiffServ
13	egressIpDiffServ
14	egressIpv6StdDiffServ
15	egressIpv6ExtDiffServ
16	webAuth
17	ipSourceGuard
18	ipv6SourceGuard
19	cpuInterface
20	rateLimit
21	linkLocal
22	reserved

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.6

diffServAccessGroupStatus

This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:

The status column has six defined values:

- 'active'…

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.16.4.28.1.7

diffServTcamTable

table

.1.3.6.1.4.1.259.10.1.43.1.16.4.29 · 1 row entry · 7 columns

Open in standard view

The conceptual table of all of DiffServTcamEntry.

diffServTcamEntry entry .1.3.6.1.4.1.259.10.1.43.1.16.4.29.1

The conceptual row for diffServTcamTable.

Indexes

No indexes recorded

Column	Syntax	OID
diffServTcamUnit This object identifies the switch within the system for which this entry contains information.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.1`
diffServTcamDevice The device id of the specified unit.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.2`
diffServTcamPool The TCAM pool index of the specified unit and device.	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.3`
diffServTcamPoolCapability The bitmap value used to identify which functions supported on this pool.	Bits	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.4`
diffServTcamTotal The total number of TCAM pool entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.5`
diffServTcamFree The free number of TCAM pool entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.6`
diffServTcamUsed The used number of TCAM pool entry.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.16.4.29.1.7`

privateVlanSessionTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.1.8 · 1 row entry · 4 columns

Open in standard view

Contains the settings for private VLAN Session.

privateVlanSessionEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.1.8.1

A conceptual row in the privateVlanSession table.

Indexes

No indexes recorded

Column Syntax OID

privateVlanSessionId

The session ID that may specifiy certain entry in the table which contains private
VLAN session information.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.1

privateVlanSessionUplinkPorts

This is the list of uplink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortDownlink of the same session, and they
also should not overlap with the privateVlanSessionPortUplink…

Q-BRIDGE-MIBPortListr/w

Enumerated Values:

1	none
2	trap
3	shutdown
4	trapAndShutdown

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.2

privateVlanSessionDownlinkPorts

This is the list of downlink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortUplink of the same session, and they also
should not overlap with the privateVlanSessionPortUplink…

Q-BRIDGE-MIBPortListr/w

Constraints:
range: 0-1024

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.3

privateVlanSessionStatus

Set this to valid(1) to create an entry. Sets this to
invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.1.8.1.4

portSecPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.2.1 · 1 row entry · 4 columns

Open in standard view

The port security(MAC binding) Table.

portSecPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.2.1.1

The entry of portSecPortTable.

Indexes

No indexes recorded

Column Syntax OID

portSecPortIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.1

portSecPortStatus

Set enabled(1) to enable port security and set disabled(2) to
disable port security.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 1-65535

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.2

portSecAction

The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be s…

Enumerationr/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.3

portSecMaxMacCount

The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the num…

Integer32r/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.10.1.43.1.17.2.1.1.4

radiusServerTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.4.7 · 1 row entry · 9 columns

Open in standard view

The table for RADIUS server.

radiusServerEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.4.7.1

The conceptual row for radiusServerTable.

Indexes

No indexes recorded

Column Syntax OID

radiusServerIndex

The RADIUS server index in the table.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.1

radiusServerAddress

IP address of a RADIUS server.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.2

radiusServerAuthPortNumber

Authentication port number of RADIUS server.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.3

radiusServerAcctPortNumber

Accounting port number of RADIUS server.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.4

radiusServerKey

Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.

OctetStringr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.5

radiusServerRetransmit

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.6

radiusServerTimeout

Timeout for RADIUS.

Integer32r/w

Constraints:
range: 0-48

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.7

radiusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.8

radiusServerType

Sets enabled(1) to enable radsec for Radius and
sets disabled(2) to disable radsec for Radius.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.17.4.7.1.9

tacacsPlusServerTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.5.4 · 1 row entry · 6 columns

Open in standard view

The table for TACACS+ server.

tacacsPlusServerEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.5.4.1

The conceptual row for tacacsPlusServerTable.

Indexes

No indexes recorded

Column Syntax OID

tacacsPlusServerIndex

TACACS+ server index.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.1

tacacsPlusServerPortNumber

TCP port number of a TACACS+ server.

Integer32r/w

Constraints:
range: 1-8

.1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.3

tacacsPlusServerKey

The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.4

tacacsPlusServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.8

tacacsPlusServerInetAddressType

Type of IP address of a TACACS+ server. Only ipv4(1) and
ipv6(2) types are supported.

INET-ADDRESS-MIBInetAddressTyper/w

Enumerated Values:

1	negotiationStart
2	authenticationStart
3	sessionStart

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.11

tacacsPlusServerInetAddress

IP address of a TACACS+ server.

INET-ADDRESS-MIBInetAddressr/w

Constraints:
range: 1-8

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.5.4.1.12

sshConnInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.6.6 · 1 row entry · 7 columns

Open in standard view

The table for Secure Shell Connection.

sshConnInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

No indexes recorded

Column	Syntax	OID
sshConnID The connection ID of the Secure Shell Connection.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.1`
sshConnMajorVersion The SSH major version.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.2`
sshConnMinorVersion The SSH minor version.	SNMPv2-SMIInteger32 Constraints: `range: 1-32` Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.3`
sshConnStatus The SSH connection State. negotiationStart(1) means the SSH is in its negotiation start state, authenticationStart(2) means the SSH is in authentication start state, sessionStart(3) means the SSH is in session start Sta…	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.5`
sshConnUserName The user name of the connection.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.6`
sshDisconnect Set the variable to disconnect the connection, noDisconnect(1) will always be obtained when reading this variable.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.7`
sshConnEncryptionTypeStr The encryption type of the SSH.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.17.6.6.1.8`

sshUserTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.6.29 · 1 row entry · 10 columns

Open in standard view

The conceptual table of all of sshUserEntry.

sshUserEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.6.29.1

The conceptual row for sshUserTable.

Indexes

No indexes recorded

Column Syntax OID

sshUserName

User Name.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.1

sshUserRsaKey1

The RSA user key segment 1.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.2

sshUserRsaKey2

The RSA user key segment 2.

KeySegment

Enumerated Values:

1	noDel
2	delRsaKey

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.3

sshUserRsaKey3

The RSA user key segment 3.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.4

sshUserRsaKey4

The RSA user key segment 4.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.5

sshUserRsaKey5

The RSA user key segment 5.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.6

sshUserRsaKey6

The RSA user key segment 6.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.7

sshUserRsaKey7

The RSA user key segment 7.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.8

sshUserRsaKey8

The RSA user key segment 8.

KeySegment

Textual Convention: KeySegment OctetString

Type Constraints:
range: 0..128

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.9

sshUserKeyDelAction

To delete the user key.

For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key.

For the get behavior:
You will get delRsaKey(2) when the delete operation is in
progress. Ot…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.17.6.29.1.18

ipFilterSnmpInetTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.9.12 · 1 row entry · 4 columns

Open in standard view

A list of IP address entries.

ipFilterSnmpInetEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.9.12.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

No indexes recorded

Column Syntax OID

ipFilterSnmpInetAddressType

The type of IP address filter.
Only supports IPv4 and IPv6 address types.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.1

ipFilterSnmpInetAddressStart

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.2

ipFilterSnmpInetAddressEnd

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.3

ipFilterSnmpInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.9.12.1.4

ipFilterHttpInetTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.9.13 · 1 row entry · 4 columns

Open in standard view

A list of IP address entries.

ipFilterHttpInetEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.9.13.1

This entry includes an IP address range which the system
will allow to connect to this device through SNMP.

Indexes

No indexes recorded

Column Syntax OID

ipFilterHttpInetAddressType

The type of IP address filter .
Only supports IPv4 and IPv6 address types.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.1

ipFilterHttpInetAddressStart

The start IP address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.2

ipFilterHttpInetAddressEnd

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.3

ipFilterHttpInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.9.13.1.4

ipFilterTelnetInetTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.9.14 · 1 row entry · 4 columns

Open in standard view

A list of IP address entries.

ipFilterTelnetInetEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.9.14.1

This entry includes an IP address range which the system
will allow them to connect to this device through SNMP.

Indexes

No indexes recorded

Column Syntax OID

ipFilterTelnetInetAddressType

The type of IP address filter .
Only supports IPv4 and IPv6 address types.

INET-ADDRESS-MIBInetAddressType

Constraints:
range: 0-32

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.1

ipFilterTelnetInetAddressStart

The start IP address.

INET-ADDRESS-MIBInetAddress

Constraints:
range: 0-15

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.2

ipFilterTelnetInetAddressEnd

The end IP address.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.3

ipFilterTelnetInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Constraints:
range: 0-1

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.9.14.1.4

userAuthTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.10.5 · 1 row entry · 5 columns

Open in standard view

This table is for creating the new user.

userAuthEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.10.5.1

Entries in this table correspond to the users entries in system.

Indexes

No indexes recorded

Column Syntax OID

userAuthUserName

The name of the user. The user name is starting with alphanumeric.

OctetString

Enumerated Values:

1	singleHost
2	multiHost
3	macBasedAuth

.1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.1

userAuthPassword

Specifies the user password. zero length input will set the user enrty
without password. If the user is not exist, it will create the user
with the giving password and privilege 0. The password is starting
with alphanum…

OctetStringr/w

Constraints:
range: 1-1024

.1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.2

userAuthPrivilege

Specifies the user level. If the user does not exist, it will create
the user with the given privilege and no password. Privilege 15
indicates system administrator, privilege 0 indicates guest user.

Integer32r/w

Enumerated Values:

1	block-traffic
2	guest-vlan

.1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.3

userAuthPublicKey

User public key, the value can be 'RSA' or 'None'.

SNMPv2-TCDisplayString

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.4

userAuthStatus

This node is used to create the user entry by '1' and to delete one
user entry by '0'.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.10.5.1.5

dot1xAuthConfigExtTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.11.1 · 1 row entry · 3 columns

Open in standard view

The extension table of dot1xAuthConfigTable.

dot1xAuthConfigExtEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.11.1.1

The entry of dot1xAuthConfigExtTable.

Indexes

No indexes recorded

Column Syntax OID

dot1xAuthConfigExtOperMode

The operation mode of dot1x port which allows host
connection to 802.1x-authorized ports.

Enumerationr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.259.10.1.43.1.17.11.1.1.1

dot1xAuthConfigExtMultiHostMaxCnt

The maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables.

Integer32r/w

Enumerated Values:

1	start-stop

.1.3.6.1.4.1.259.10.1.43.1.17.11.1.1.2

dot1xAuthConfigExtPortIntrusionAction

Responses to intrusion when the authentication is failed;
block-traffic(1) means that to block traffic when the authentication is failed and
guest-vlan(2) means that to join to a guest VLAN when the authentication is fa…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.17.11.1.1.3

aaaMethodTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.12.1 · 1 row entry · 7 columns

Open in standard view

Contains the settings needed for accounting.

aaaMethodEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.12.1.1

A conceptual row in the aaaMethodTable.

Indexes

No indexes recorded

Column Syntax OID

aaaMethodIndex

Specifies the index for the entry.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.1

aaaMethodName

Name for the method.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.2

aaaMethodGroupName

Name for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName.

OctetStringr/w

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.3

aaaMethodMode

start-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process b…

Enumerationr/w

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.4

aaaMethodStatus

Set to 1 to initiate the aaaMethodTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.5

aaaMethodClientType

dot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console; commands(3): Provides
accounting service for command privileges.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.6

aaaMethodPrivilegeLevel

Specifies the privilege level for the entry.
When aaaMethodClientType is in the mode of command(3),
the privilege level is enabled to be accessed.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.12.1.1.7

aaaRadiusGroupTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.12.2 · 1 row entry · 4 columns

Open in standard view

Uses a subset of RADIUS servers for accounting as defined by the server group

aaaRadiusGroupEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.12.2.1

A conceptual row of aaaRadiusGroupEntry.

Indexes

No indexes recorded

Column Syntax OID

aaaRadiusGroupIndex

Specifies the index for the entry.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.1

aaaRadiusGroupServerBitMap

Identifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.2

aaaRadiusGroupName

Uses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed.

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.3

aaaRadiusGroupStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.12.2.1.4

aaaTacacsPlusGroupTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.12.3 · 1 row entry · 4 columns

Open in standard view

Uses a subset of TACACS+ servers for accounting as defined by the server group

aaaTacacsPlusGroupEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.12.3.1

A conceptual row of aaaTacacsPlusGroupEntry.

Indexes

No indexes recorded

Column Syntax OID

aaaTacacsPlusGroupIndex

Specifies the index for the entry.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.1

aaaTacacsPlusGroupServerBitMap

Identifies which TACACS+ sever to use.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.2

aaaTacacsPlusGroupName

Uses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupName

SNMPv2-TCDisplayStringr/w

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.3

aaaTacacsPlusGroupStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.12.3.1.4

aaaAccountTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.12.5 · 1 row entry · 4 columns

Open in standard view

Specifies an interface or a set of interfaces that the
accounting method list will be applied to.

aaaAccountEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.12.5.1

A conceptual row of aaaAccountTable.

Indexes

No indexes recorded

Column Syntax OID

aaaAccountIfIndex

Defined as the ifIndex

IF-MIBInterfaceIndex

Enumerated Values:

1	console
2	vty

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.1

aaaAccountMethodName

Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 1-64

Textual Convention: SNMPv2-TCDisplayString OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.2

aaaAccountProtocol

Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.3

aaaAccountStatus

Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.12.5.1.4

aaaCommandPrivilegesTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.12.8 · 1 row entry · 3 columns

Open in standard view

Contains the settings needed for command privileges.

aaaCommandPrivilegesEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.12.8.1

A conceptual row in the aaaCommandPrivilegesTable.

Indexes

No indexes recorded

Column	Syntax	OID
aaaCommandPrivilegesLevel Specifies the privilege level index for the entry.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.17.12.8.1.1`
aaaCommandPrivilegesInterfaceIndex Specifies the interface index for the entry.	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.17.12.8.1.2`
aaaCommandPrivilegesMethodName Specifies the method name in the lists under the mode of command privileges.	OctetStringr/w	`.1.3.6.1.4.1.259.10.1.43.1.17.12.8.1.3`

aaaAccExecTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.12.9 · 1 row entry · 2 columns

Open in standard view

Specifies an interface or a set of interfaces that the
accounting method list will be applied to.

aaaAccExecEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.12.9.1

A conceptual row of aaaAccExecTable.

Indexes

No indexes recorded

Column	Syntax	OID
aaaAccExecIndex The method of accessing CLI management.	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.17.12.9.1.1`
aaaAccExecMethodName Specifies the name of the list of accounting methods to use. If no method name is specified, the system uses the default.	SNMPv2-TCDisplayStringr/w Constraints: `range: 0-64` Textual Convention: SNMPv2-TCDisplayString `OctetString` Type Constraints: `range: 0..255`	`.1.3.6.1.4.1.259.10.1.43.1.17.12.9.1.2`

networkAccessPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.13.2 · 1 row entry · 7 columns

Open in standard view

A table contains the information of network access about every port.

networkAccessPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.13.2.1

A conceptual row in the networkAccessPort table.

Indexes

No indexes recorded

Column Syntax OID

networkAccessPortPortIndex

The port and the trunk (excluding trunk members) interface of the
portTable. The interface identified by a particular value of this port
index is the same interface identified by the same value of
ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.1

networkAccessPortDynamicVlan

Sets enabled(1) to enable dynamic VLAN assigment and
sets disabled(2) to disable dynamic VLAN assigment.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.2

networkAccessPortMaxMacCount

Specifies the maximum number of authenticated MAC address.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.3

networkAccessPortMode

Specifies the secure port mode. enabled(1) means that Mac address
authentication is used and disabled(2) means that the authentication is disabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.4

networkAccessPortMacFilter

Specifies the MAC filter ID, Set this variable to zero to
disable MAC filter.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.5

networkAccessPortGuestVlan

Specifies the guest VLAN ID. To disable the VLAN, set the value to 0.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.6

networkAccessPortDynamicQos

Set this object to enabled(1) to enable Dynamic QoS.
Set this object to disabled(2) to disable Dynamic QoS.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 12-12

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.17.13.2.1.10

networkAccessMacAddressTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.13.4 · 1 row entry · 6 columns

Open in standard view

Contains the information of network access MAC addresses.

networkAccessMacAddressEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.13.4.1

A conceptual row in the networkAccessMacAddress table.

Indexes

No indexes recorded

Column Syntax OID

networkAccessMacAddressAddress

Specifies the authenticated MAC address.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.1

networkAccessMacAddressPort

Specifies the port of authenticated MAC address.

IF-MIBInterfaceIndex

Constraints:
range: 1-64

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.2

networkAccessMacAddressInetAddressType

This object indicates the type of IP address denoted in
networkAccessMacAddressRadiusServerInetAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.3

networkAccessMacAddressRadiusServerInetAddress

Displays the IP address of radius server that authenticates
the specified Mac address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.4

networkAccessMacAddressTime

Displays the authentication time of the authenticated MAC address.
The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'.
'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is
preceded by a zer…

OctetString

.1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.5

networkAccessMacAddressAttribute

Displays the attribute of an authenticated MAC address.
static(1) indicates resauthorized secure MAC address.
dynamic(2) indicates learnt secure MAC address.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.17.13.4.1.6

networkAccessMacFilterWithMaskTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.13.6 · 1 row entry · 4 columns

Open in standard view

Contains the settings for MAC filter.

networkAccessMacFilterWithMaskEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.13.6.1

A conceptual row in the networkAccessMacFilterWithMaskTable.

Indexes

No indexes recorded

Column Syntax OID

networkAccessMacFilterWithMaskID

Specifies the MAC filter ID.

Integer32

Constraints:
range: 0-1024

.1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.1

networkAccessMacFilterWithMaskMacAddress

Specifies the MAC address to be filtered.

SNMPv2-TCMacAddress

Enumerated Values:

1	block-traffic
2	pass-traffic

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.2

networkAccessMacFilterWithMaskMacAddressMask

Specifies the MAC mask to be filtered.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.3

networkAccessMacFilterWithMaskStatus

Set this object to valid(1) to create an entry.
Set this object to invalid(2) to destroy an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.17.13.6.1.4

macAuthPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.14.2 · 1 row entry · 3 columns

Open in standard view

Contains the settings for mac authentication of each port.

macAuthPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.14.2.1

A conceptual row in the macAuthPort table.

Indexes

No indexes recorded

Column	Syntax	OID
macAuthPortIndex The port and the trunk (including trunk members) interface of the port table. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.17.14.2.1.1`
macAuthPortMaxMacCount Specifies the maximum number of authenticated MAC addresses for MAC authentication.	Integer32r/w	`.1.3.6.1.4.1.259.10.1.43.1.17.14.2.1.2`
macAuthPortIntrusionAction Responses to intrusion when the authentication is failed. block-traffic(1) : denies network access to an unauthorized client; pass-traffic(2) : allows unauthorized clients to the access network.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.17.14.2.1.3`

webAuthPortConfigTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.15.9 · 1 row entry · 3 columns

Open in standard view

Contains the settings for web authentication of each port.

webAuthPortConfigEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.15.9.1

A conceptual row in the webAuthPortConfigTable.

Indexes

No indexes recorded

Column Syntax OID

webAuthPortConfigPortIndex

The port number of the port that may specify certain entry in the table which contains web authentication information.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.15.9.1.1

webAuthPortConfigStatus

Sets enabled(1) to enable web authentication feature for each port and
sets disabled(2) to disable web authentication for each port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.17.15.9.1.2

webAuthPortConfigAuthenticatedHostCount

Displays the authenticated host counts for each port

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.15.9.1.3

webAuthPortInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.17.15.10 · 1 row entry · 6 columns

Open in standard view

Contains the information for web authentication of each port.

webAuthPortInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.17.15.10.1

A conceptual row in the webAuthPortTable.

Indexes

No indexes recorded

Column Syntax OID

webAuthPortInfoPortIndex

The port number for which this entry contains web authentication information.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.15.10.1.1

webAuthPortInfoPortAuthSuccessIndex

The authentication success number of port for which this entry contains web authentication information.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.17.15.10.1.2

webAuthPortInfoInetAddressType

This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.17.15.10.1.3

webAuthPortInfoInetAddress

The IP address which may specify the entry containing web authentication information.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.17.15.10.1.4

webAuthPortInfoRemainingSessiontime

The remaining session time for authenticated hosts. During this
period, they may use internet resource. When the session time expires, they
will need to re-authenticate again.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.17.15.10.1.5

webAuthPortInfoStatus

Displays the web authentication status for each port.
authenticated (1) means the user is authenticated.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.17.15.10.1.6

arpProxyArpTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.1.4 · 1 row entry · 2 columns

Open in standard view

A list of Proxy ARP status. This table has entries for all static
VLANs.

arpProxyArpEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.1.4.1

An entry in the table, containing information about Proxy ARP
configuration.

Indexes

No indexes recorded

Column Syntax OID

arpProxyArpIfIndex

This is defined as a VLAN interface.
A routing interface is a VLAN that binds an IP subnet.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.18.1.4.1.1

arpProxyArpStatus

Enable or disable proxy ARP process on an interface.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.18.1.4.1.2

ripInstabilityPreventingTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.4 · 1 row entry · 2 columns

Open in standard view

A list of RIP instability preventing status.

ripInstabilityPreventingEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.4.1

An entry in the table, containing information about RIP instability
preventing configuration.
The ifIndex index is a VLAN's ifIndex.

Indexes

No indexes recorded

Column	Syntax	OID
ripIfindex This is defined as a VLAN interface. A routing interface is a VLAN and an IP subnet bound to it.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.18.2.4.1.1`
ripSplitHorizonStatus Enable or disable RIP poison reverse on an interface.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.18.2.4.1.2`

ripNetworkByInetAddrTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.1 · 1 row entry · 4 columns

Open in standard view

The RIP network address table.

ripNetworkByInetAddrEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.6.1.1

A conceptual row of the ripNetworkByInetAddrTable.

Indexes

No indexes recorded

Column Syntax OID

ripNetworkByInetAddrAddressType

The RIP Network address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.1.1.1

ripNetworkByInetAddrAddress

The RIP Network address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.1.1.2

ripNetworkByInetAddrPfxLen

Network prefix length.

INET-ADDRESS-MIBInetAddressPrefixLength

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.1.1.3

ripNetworkByInetAddrStatus

Set this variable to create or destroy a RIP network address.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.1.1.4

ripNetworkByIfindexTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.2 · 1 row entry · 2 columns

Open in standard view

The RIp network ifindex table.

ripNetworkByIfindexEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.6.2.1

A conceptual row of the ripNetworkByIfindexTable.

Indexes

No indexes recorded

Column Syntax OID

ripNetworkIfindex

This is defined as a layer3 interface.

IF-MIBInterfaceIndex

Constraints:
range: 1-15

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.2.1.1

ripNetworkByIfindexStatus

Set this variable to create or destroy a RIP network ifindex table.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.18.2.6.2.1.2

ripDistributeListTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.7 · 1 row entry · 5 columns

Open in standard view

The RIP distribute list table. It's used to filter incoming or
outgoing route updates using the access-list or prefix-list.

ripDistributeListEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.7.1

A conceptual row of the ripDistributelistTable.

Indexes

ripRedistributeProtocol

Column Syntax OID

ripDistributeListInterfaceIndex

The index of the interface on which distribute-list is applied, If
index is 0, the filter will be applied to all the interfaces.

IF-MIBInterfaceIndex

Enumerated Values:

1	connected
2	static
3	ospf
4	bgp

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.18.2.7.1.1

ripDistributeListType

Type of distribute-list applied: access-list or prefix-list.

Enumeration

Constraints:
range: 0-16

.1.3.6.1.4.1.259.10.1.43.1.18.2.7.1.2

ripDistributeListIncomingRouteFilterName

Specifies access-list or prefix-list name to filter incoming routing
updates.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.18.2.7.1.3

ripDistributeListOutgoingRouteFilterName

Specifies access-list or prefix-list name to filter outgoing routing
updates.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.18.2.7.1.4

ripDistributeListStatus

Set this variable to create or destroy a distribute list.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.18.2.7.1.5

ripRedistributeTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.8 · 1 row entry · 3 columns

Open in standard view

The RIP Redistribute table. Config rip redistribute type, metric.

ripRedistributeEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.8.1

A conceptual row of the ripRedistributeTable.

Indexes

No indexes recorded

Column Syntax OID

ripRedistributeProtocol

Protocol redistributed to Intermediate System:
connected -- redistribute from connected routes;
static -- redistribute from static routes;
ospf -- redistribute from Open Shortest Path First (OSPF);
bgp -- redistribute f…

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.18.2.8.1.1

ripRedistributeMetric

Metric value to be used in redistributing.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.18.2.8.1.2

ripRedistributeStatus

Set this variable to create or destroy redistribute information.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.18.2.8.1.3

ripNeighborTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.10 · 1 row entry · 3 columns

Open in standard view

The RIP neighbor table.

ripNeighborEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.10.1

A conceptual row of the ripNeighborTable.

Indexes

No indexes recorded

Column Syntax OID

ripNeighborAddressType

The RIP Neighbor address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.18.2.10.1.1

ripNeighborAddress

The RIP Neighbor address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.18.2.10.1.2

ripNeighborAddressStatus

Set this variable to create or destroy a RIP neighbor address.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.18.2.10.1.3

ripPassiveInterfaceTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.11 · 1 row entry · 2 columns

Open in standard view

A list of RIP passive interface status.

ripPassiveInterfaceEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.11.1

An entry in the table, containing information about RIP passive
interface(s) configuration. The index is a VLAN's ifIndex.

Indexes

No indexes recorded

Column Syntax OID

ripInterfaceIndex

This is defined as a VLAN interface.
A passive VLAN interface will suppress route updates on it.

IF-MIBInterfaceIndex

Enumerated Values:

1	noClear
2	clear

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.18.2.11.1.1

ripPassiveInterfaceStatus

Set this variable to create or destroy a RIP passive interface.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.18.2.11.1.2

ripRouteClearByNetworkTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.13.2 · 1 row entry · 4 columns

Open in standard view

Clear rip route by network address.

ripRouteClearByNetworkEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.13.2.1

Clear rip route by network address.

Indexes

No indexes recorded

Column Syntax OID

ripRouteClearByNetworkInetAddrType

The RIP route network address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.18.2.13.2.1.1

ripRouteClearByNetworkInetAddr

The RIP route network address.Write this object to clear rip route by
network address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.18.2.13.2.1.2

ripRouteClearByNetworkPfxLen

The RIP route network prefix length.

INET-ADDRESS-MIBInetAddressPrefixLength

Constraints:
range: 1-255

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.43.1.18.2.13.2.1.3

ripRouteClearByNetworkClearAction

Write this object value 2(clear) to clear rip route by spicify network
address, when read, this always return noClear(1).

Enumerationr/w

Constraints:
range: 0-15

.1.3.6.1.4.1.259.10.1.43.1.18.2.13.2.1.4

ripDistanceTable

table

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2 · 1 row entry · 6 columns

Open in standard view

Rip distance table

ripDistanceEntry entry .1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1

Rip distance entry

Indexes

No indexes recorded

Column Syntax OID

ripDistanceInetAddrType

The RIP distace table network address type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1.1

ripDistanceInetAddr

The RIP distance table network address.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1.2

ripDistancePfxLen

The RIP distance table network prefix length.

INET-ADDRESS-MIBInetAddressPrefixLength

Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32

Type Constraints:
range: 0..2040

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1.3

ripDistanceValue

The RIP distance table distance value.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1.4

ripDistanceAlistName

The RIP distance table access list name. If delete the
access list name ,set null string

OctetStringr/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1.5

ripDistanceRowStatus

This object indicates the status of this entry.

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.18.2.15.2.1.6

remoteLogServerInetTable

table

.1.3.6.1.4.1.259.10.1.43.1.19.6.7 · 1 row entry · 4 columns

Open in standard view

A table for storing the remote log server list.

remoteLogServerInetEntry entry .1.3.6.1.4.1.259.10.1.43.1.19.6.7.1

A conceptual row for remoteLogServerInetTable.

Indexes

No indexes recorded

Column Syntax OID

remoteLogServerInetAddressType

Indicates the type of address
denoted in remoteLogServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.1

remoteLogServerInetAddress

The IP address of the remote log Server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.2

remoteLogServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.3

remoteLogServerUdpPort

The UDP port number of the remote log Server

Integer32r/w

Constraints:
range: 0-41

.1.3.6.1.4.1.259.10.1.43.1.19.6.7.1.4

smtpServerIpTable

table

.1.3.6.1.4.1.259.10.1.43.1.19.7.4 · 1 row entry · 2 columns

Open in standard view

The SMTP server IP table.
The maximum servers to be added is 3.

smtpServerIpEntry entry .1.3.6.1.4.1.259.10.1.43.1.19.7.4.1

A conceptual row of the smtpServerIpTable.

Indexes

No indexes recorded

Column Syntax OID

smtpServerIp

SMTP mail server's IP address.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.19.7.4.1.1

smtpServerIpStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Constraints:
range: 1-3

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.19.7.4.1.2

smtpDestEMailTable

table

.1.3.6.1.4.1.259.10.1.43.1.19.7.5 · 1 row entry · 2 columns

Open in standard view

The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5.

smtpDestEMailEntry entry .1.3.6.1.4.1.259.10.1.43.1.19.7.5.1

A conceptual row of the smtpDestEMailTable.

Indexes

No indexes recorded

Column Syntax OID

smtpDestEMail

SMTP destination e-mail address.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.19.7.5.1.1

smtpDestEMailStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.19.7.5.1.2

sntpServerTable

table

.1.3.6.1.4.1.259.10.1.43.1.23.1.4 · 1 row entry · 4 columns

Open in standard view

Table for SNTP servers. IP addresses
must occupy contiguous indexes, starting from 1.
If a removed entry is not the last entry, the table
will be shifted to contiguous indexes automatically.

sntpServerEntry entry .1.3.6.1.4.1.259.10.1.43.1.23.1.4.1

Entry for SNTP servers.

Indexes

No indexes recorded

Column Syntax OID

sntpServerIndex

The index of a server.

Integer32

Constraints:
range: 1-32

.1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.1

sntpServerInetAddressType

Indicates the type of address
denoted in sntpServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported.

INET-ADDRESS-MIBInetAddressTyper/w

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.4

sntpServerInetAddress

The IP address of a time server.

INET-ADDRESS-MIBInetAddressr/w

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.5

sntpServerStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.23.1.4.1.6

ntpAuthKeyTable

table

.1.3.6.1.4.1.259.10.1.43.1.23.5.6 · 1 row entry · 3 columns

Open in standard view

Table for NTP Authentication keys

ntpAuthKeyEntry entry .1.3.6.1.4.1.259.10.1.43.1.23.5.6.1

Entry for NTP Authentication keys.

Indexes

No indexes recorded

Column Syntax OID

ntpAuthKeyId

The index of a Authentication key. This table has fixed size.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.23.5.6.1.1

ntpAuthKeyWord

The Authentication key word is used to created a key by the MD5
And the max length is 32.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.23.5.6.1.2

ntpAuthKeyStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.23.5.6.1.3

ntpServerInetTable

table

.1.3.6.1.4.1.259.10.1.43.1.23.5.8 · 1 row entry · 5 columns

Open in standard view

Table for NTP servers.

ntpServerInetEntry entry .1.3.6.1.4.1.259.10.1.43.1.23.5.8.1

Entry for NTP servers.

Indexes

fileInfoUnitID fileInfoFileName

Column Syntax OID

ntpServerInetAddressType

Indicates the type of address denoted in ntpServerInetAddress
type. Only ipv4(1), ipv6(2), and dns(16) types are supported.

INET-ADDRESS-MIBInetAddressType

Constraints:
range: 1-1

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.23.5.8.1.1

ntpServerInetAddress

The address of a time server.

INET-ADDRESS-MIBInetAddress

Constraints:
range: 1-32

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.23.5.8.1.2

ntpServerInetVersion

NTP version.

SNMPv2-SMIInteger32

Enumerated Values:

1	diag
2	runtime
3	syslog
4	cmdlog
5	config
6	postlog
7	private
8	certificate
9	webarchive

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.23.5.8.1.3

ntpServerInetKeyId

Key for a NTP server.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.23.5.8.1.4

ntpServerInetStatus

Status of the NTP server. Setting this to valid(1) creates an
entry. Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.23.5.8.1.5

fileInfoTable

table

.1.3.6.1.4.1.259.10.1.43.1.24.2.1 · 1 row entry · 7 columns

Open in standard view

This table contain the information of the file system;
we can also perform the delete, set startup file operation.

fileInfoEntry entry .1.3.6.1.4.1.259.10.1.43.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

No indexes recorded

Column Syntax OID

fileInfoUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.1

fileInfoFileName

The file Name of the file System in the device.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.2

fileInfoFileType

The file type of the file System in the device.

Enumeration

Constraints:
range: 1-1

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.3

fileInfoIsStartUp

This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation.

SNMPv2-TCTruthValuer/w

Enumerated Values:

1	notCopying
2	copying

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.4

fileInfoFileSize

The sizes( in bytes) of the file.

bytesSNMPv2-SMIInteger32

Enumerated Values:

1	fileCopyTftpUndefError
2	fileCopyTftpFileNotFound
3	fileCopyTftpAccessViolation
4	fileCopyTftpDiskFull
5	fileCopyTftpIllegalOperation
6	fileCopyTftpUnkownTransferId
7	fileCopyTftpFileExisted
8	fileCopyTftpNoSuchUser
9	fileCopyTftpTimeout
10	fileCopyTftpSendError
11	fileCopyTftpReceiverError
12	fileCopyTftpSocketOpenError
13	fileCopyTftpSocketBindError
14	fileCopyTftpUserCancel
15	fileCopyTftpCompleted
16	fileCopyParaError
17	fileCopyBusy
18	fileCopyUnknown
19	fileCopyReadFileError
20	fileCopySetStartupError
21	fileCopyFileSizeExceed
22	fileCopyMagicWordError
23	fileCopyImageTypeError
24	fileCopyHeaderChecksumError
25	fileCopyImageChecksumError
26	fileCopyWriteFlashFinish
27	fileCopyWriteFlashError
28	fileCopyWriteFlashProgramming
29	fileCopyError
30	fileCopySuccess
31	fileCopyCompleted
41	fileCopyFileNotFound
42	fileCopyServerPermissionDenied
43	fileCopyStorageFull
44	fileCopyConnectError
45	fileCopyServerNotInService
46	fileCopyDataConnectionOpenError
47	fileCopyLogInError
48	fileCopyInvalidFileName
49	fileCopyServerNotAcceptProvidedCiphers
50	fileCopyServerNotSupportFtps
51	fileCopyFileUnavailable
52	fileCopyUnclassifiedError
53	fileCopyTimeout
54	fileCopyProjectIdError
55	fileCopyFileNumExceed
56	fileCopySameVersion

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.5

fileInfoCreationTime

The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-d…

OctetString

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.6

fileInfoDelete

Write this object to delete(2) to delete a file, when
read, this always return noDelete(1).

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.24.2.1.1.7

fileAutoDownloadResultTable

table

.1.3.6.1.4.1.259.10.1.43.1.24.3 · 1 row entry · 3 columns

Open in standard view

This table contains file auto download result information.

fileAutoDownloadResultEntry entry .1.3.6.1.4.1.259.10.1.43.1.24.3.1

A conceptual row for fileAutoDownloadResultTable.

Indexes

No indexes recorded

Column Syntax OID

fileAutoDownloadResultUnitID

The switch unit in a stacking system, in a
non-stacking system, this value is always 1.

Integer32

Enumerated Values:

1	address
2	cname

.1.3.6.1.4.1.259.10.1.43.1.24.3.1.1

fileAutoDownloadResultAction

The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
…

Enumeration

Constraints:
range: 0-876000

.1.3.6.1.4.1.259.10.1.43.1.24.3.1.2

fileAutoDownloadResultStatus

The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.
The listed values are identical to fileCopyStatus.

Enumeration

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.43.1.24.3.1.3

dnsCacheTable

table

.1.3.6.1.4.1.259.10.1.43.1.26.7 · 1 row entry · 7 columns

Open in standard view

To display the RRs in DNS cache.

dnsCacheEntry entry .1.3.6.1.4.1.259.10.1.43.1.26.7.1

A conceptual row for the dnsCacheTable.

Indexes

No indexes recorded

Column Syntax OID

dnsCacheIndex

The entry sequence number.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.1

dnsCacheFlag

Always get 4, means this record is unreliable.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.2

dnsCacheType

Cache Type: address(1); cname(2).

Enumeration

Constraints:
range: 1-16

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.3

dnsCacheTtl

The DNS cache TTL.

Integer32

Constraints:
range: 1-255

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.5

dnsCacheDomain

The DNS cache domain.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.6

dnsCacheInetAddressType

Indicates the type of address
denoted in dnsHostAddrInetAddress type.
Only ipv4(1) and ipv6(2) types are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.7

dnsCacheInetAddress

IP address of DNS cache item.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.26.7.1.8

dnsHostTable

table

.1.3.6.1.4.1.259.10.1.43.1.26.8 · 1 row entry · 3 columns

Open in standard view

The conceptual table of dnsHostEntry.
The dnsHostTable and dnsHostAddrTable are used to define
static host name-to-address mapping.

dnsHostEntry entry .1.3.6.1.4.1.259.10.1.43.1.26.8.1

A conceptual row for the dnsHostTable.

Indexes

No indexes recorded

Column Syntax OID

dnsHostIndex

The entry sequence number.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.26.8.1.1

dnsHostName

Host name.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.26.8.1.2

dnsHostStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.26.8.1.3

dnsHostAddrTable

table

.1.3.6.1.4.1.259.10.1.43.1.26.9 · 1 row entry · 3 columns

Open in standard view

The conceptual table of dnsHostAddrEntry.
The dnsHostTable and dnsHostAddrTable are used to define
static host name-to-address mapping.

dnsHostAddrEntry entry .1.3.6.1.4.1.259.10.1.43.1.26.9.1

A conceptual row for the dnsHostAddrTable.

Indexes

No indexes recorded

Column Syntax OID

dnsHostAddrInetAddressType

Indicates the type of address
denoted in dnsHostAddrInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4) type are supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.26.9.1.1

dnsHostAddrInetAddress

Specifies the address of the host.
Adding one address to two different hosts is not allowed.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.26.9.1.2

dnsHostAddrStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.26.9.1.3

dnsDomainListTable

table

.1.3.6.1.4.1.259.10.1.43.1.26.10 · 1 row entry · 3 columns

Open in standard view

This table defines a list of default domain names to complete unqualified host names.

dnsDomainListEntry entry .1.3.6.1.4.1.259.10.1.43.1.26.10.1

A conceptual row for the dnsDomainListTable.

Indexes

No indexes recorded

Column Syntax OID

dnsDomainListIndex

The entry sequence number.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.26.10.1.1

dnsDomainListName

Domain name.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.26.10.1.2

dnsDomainListStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.26.10.1.3

dnsNameServerInetTable

table

.1.3.6.1.4.1.259.10.1.43.1.26.11 · 1 row entry · 3 columns

Open in standard view

Specifies the address of one or more name servers to use for
name and address resolution.

dnsNameServerInetEntry entry .1.3.6.1.4.1.259.10.1.43.1.26.11.1

A conceptual row for dnsNameServerInetTable.

Indexes

No indexes recorded

Column Syntax OID

dnsNameServerInetAddressType

Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are
supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.26.11.1.1

dnsNameServerInetAddress

IP address of name server.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.26.11.1.2

dnsNameServerInetStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.26.11.1.3

pethPseMainExtTable

table

.1.3.6.1.4.1.259.10.1.43.1.28.5 · 1 row entry · 2 columns

Open in standard view

A table of objects that display and control attributes of the main
power source in a PSE device. Ethernet switches are one example of
boxes that would support these objects. Values of all read-write
objects in this table are persistent at restart/reboot.

pethPseMainExtEntry entry .1.3.6.1.4.1.259.10.1.43.1.28.5.1

A set of objects that display and control the Main power of a PSE.

Indexes

No indexes recorded

Column Syntax OID

pethPseMainExtDllPowerType

Indicates whether the local system is a PSE or a PD
and whether it is Type 1 or Type 2.

Enumeration

Enumerated Values:

0	none
1	active
2	inactive

.1.3.6.1.4.1.259.10.1.43.1.28.5.1.1

pethPseMainExtDllPowerSource

The power sources of the local system.

Enumeration

Constraints:
range: 3000-34200

.1.3.6.1.4.1.259.10.1.43.1.28.5.1.2

pethPsePortExtTable

table

.1.3.6.1.4.1.259.10.1.43.1.28.6 · 1 row entry · 6 columns

Open in standard view

A table of objects that display and control the power characteristics
of power Ethernet ports on a Power Source Entity (PSE) device.
This group will be implemented in managed power Ethernet switches and
mid-span devices. Values of all read-write objects in this table are
persistent at restart/reboot.

pethPsePortExtEntry entry .1.3.6.1.4.1.259.10.1.43.1.28.6.1

A set of objects that display and control the power characteristics of
a power Ethernet PSE port.

Indexes

No indexes recorded

Column	Syntax	OID
pethPsePortExtMirroredDllPdRequestedPowerValue Returns the PD requested power value received from the remote system. The definition and encoding of PD requested power value is the same as described in pethPdPortDllPdRequestedPowerValue.	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.28.6.1.4`
pethPsePortExtDllPseAllocatedPowerValue Returns the PSE allocated power value that the local system has currently allocated to the remote system. The PSE allocated power value is the maximum input average power that the PSE wants the PD to ever draw under thi…	SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.28.6.1.6`
pethPsePortTimeRange The name of the time range entry bound to the port. This object should be equal to one of the timeRangeName objects in timeRangeTable. The object works when pethPsePortAdminEnable is enabled(1).	OctetStringr/w	`.1.3.6.1.4.1.259.10.1.43.1.28.6.1.11`
pethPsePortTimeRangeStatus If no time range entry is bound to the port, value of this object is none(0). If PoE time range of the port is active, value of this object is active(1). If PoE time range of the port is inactive, value of this object i…	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.28.6.1.12`
pethPsePortExtMaximumPowerValue Returns the user-configurable maximum power value that the local system has currently allocated to the remote system. The units of this variable is milliwatts.	milliwattsInteger32r/w	`.1.3.6.1.4.1.259.10.1.43.1.28.6.1.13`
pethPsePortExtUsedPowerValue Returns the currently used power value that the local system is delivering to the remote system. The units of this variable is milliwatts.	milliwattsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.28.6.1.14`

mcastStormTable

table

.1.3.6.1.4.1.259.10.1.43.1.33.1.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the control of multicast storms for ports.

mcastStormEntry entry .1.3.6.1.4.1.259.10.1.43.1.33.1.1.1

The conceptual row of multiStormTable.

Indexes

No indexes recorded

Column Syntax OID

mcastStormIfIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.1

mcastStormStatus

Whether multicast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.2

mcastStormPktRate

Multicast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.4

mcastStormPktRateResolution

Present the rate's resolution. Its unit is packets per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.1.1.1.8

bcastStormTable

table

.1.3.6.1.4.1.259.10.1.43.1.33.3.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the control of broadcast storms for ports.

bcastStormEntry entry .1.3.6.1.4.1.259.10.1.43.1.33.3.1.1

The conceptual row of bcastStormTable.

Indexes

No indexes recorded

Column Syntax OID

bcastStormIfIndex

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.1

bcastStormStatus

Whether broadcast storm protection is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.2

bcastStormPktRate

Broadcast storm threshold as packets per second.
If this entry is for a trunk, this is the value
for each member port. The range is 500 to 1488100.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.4

bcastStormPktRateResolution

Present the rate's resolution. Its unit is packets per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.3.1.1.8

unknownUcastStormTable

table

.1.3.6.1.4.1.259.10.1.43.1.33.4.1 · 1 row entry · 4 columns

Open in standard view

Table to manage the unknown unicast storm control.

unknownUcastStormEntry entry .1.3.6.1.4.1.259.10.1.43.1.33.4.1.1

The conceptual row of unknownUcastStormTable.

Indexes

No indexes recorded

Column Syntax OID

unknownUcastStormIfIndex

The port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB.

IF-MIBInterfaceIndex

Constraints:
range: 1-10000

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.1

unknownUcastStormStatus

The parameter indicates that the unknown unicast
storm protection is enabled/disabled.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 1-10000

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.2

unknownUcastStormPktRate

The parameter indicates the packet rate(packet per second) of the storm protection.
The range is 500 to 1488100.

SNMPv2-SMIInteger32r/w

Constraints:
range: 1-10000

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.4

unknownUcastStormPktRateResolution

Present the rate's resolution. Its unit is packets per
second

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.33.4.1.1.8

taskCpuTable

table

.1.3.6.1.4.1.259.10.1.43.1.39.4 · 1 row entry · 4 columns

Open in standard view

Table of descriptive and status information describing the
CPU utilization of each task.

taskCpuEntry entry .1.3.6.1.4.1.259.10.1.43.1.39.4.1

An entry in the table, describing the CPU utilization of one
task.

Indexes

No indexes recorded

Column Syntax OID

taskCpuName

The name of the task.

OctetString

.1.3.6.1.4.1.259.10.1.43.1.39.4.1.1

taskCpuCurrentUti

The current CPU utilization in hundredths of a percent in the
past 5 seconds.

Integer32

Enumerated Values:

1	active
2	inactive

.1.3.6.1.4.1.259.10.1.43.1.39.4.1.2

taskCpuStatMaxUti

The maximum CPU utilization in hundredths of a percent in the
past 60 seconds.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.39.4.1.3

taskCpuStatAvgUti

The average CPU utilization in hundredths of a percent in the
past 60 seconds.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.39.4.1.4

mvrDomainTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.20 · 1 row entry · 6 columns

Open in standard view

The table for configuring the MVR port.

mvrDomainEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.20.1

The entry for configuring the MVR Domain.

Indexes

No indexes recorded

Column Syntax OID

mvrDomainId

Speicfies which MVR domain to configure.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.44.20.1.1

mvrDomainStatus

Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 1-5

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.44.20.1.2

mvrDomainRunningStatus

Describes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of active(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of inactive(2)
indicates that s…

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.44.20.1.3

mvrDomainVlanId

To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB.

Q-BRIDGE-MIBVlanIndexr/w

Enumerated Values:

0	none
1	source
2	receiver

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.44.20.1.4

mvrDomainUpstreamSourceIp

Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router
through MVR source port.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.44.20.1.5

mvrDomainClearDynamicGroups

Clear dynamic learned groups

SNMPv2-TCTruthValuer/w

Enumerated Values:

1	active
2	inactive

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.44.20.1.6

mvrDomainPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.21 · 1 row entry · 6 columns

Open in standard view

The table for configuring the MVR port.

mvrDomainPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.21.1

The entry for configuring the MVR port.

Indexes

No indexes recorded

Column Syntax OID

mvrPortDomainId

Speicfies which MVR domain to configure.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.44.21.1.1

mvrDomainIfIndex

The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB.

IF-MIBInterfaceIndex

Constraints:
range: 0-31

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.44.21.1.2

mvrDomainPortType

For configuring the MVR port type. To disable the MVR
port type, use the none(0).

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.44.21.1.3

mvrDomainPortImmediateLeave

To enable immediate leave on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Enumerated Values:

0	noAction
1	create
2	destory

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.44.21.1.4

mvrDomainPortActive

To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2).

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.44.21.1.5

mvrDomainPortImmediateLeaveByHostIp

To enable immediate leave by host IP on MVR port.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.44.21.1.6

mvrProfileCtlTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.22.1 · 1 row entry · 3 columns

Open in standard view

The entry for configuring the MVR profile.

mvrProfileCtlEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.22.1.1

The entry for configuring the MVR profile.

Indexes

No indexes recorded

Column Syntax OID

mvrProfileCtlId

Profile ID to index which MVR profile

Integer32

.1.3.6.1.4.1.259.10.1.43.1.44.22.1.1.1

mvrProfileName

MVR Profile name which identify a group range.

NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before
mvrProfileCtlAction really creat the profile.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.44.22.1.1.2

mvrProfileCtlAction

Set this object to create(2) to create profile. Set this object
to destory(3) to delete profile. When
the action is complete, this object becomes noAction(1).

Enumerationr/w

Enumerated Values:

0	noAction
1	create
2	destory

.1.3.6.1.4.1.259.10.1.43.1.44.22.1.1.5

mvrProfileGroupCtlTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.22.2 · 1 row entry · 5 columns

Open in standard view

The entry for configuring the MVR group ranges for MVR profile.

mvrProfileGroupCtlEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.22.2.1

The entry for configuring the group ranges on MVR profile.

Indexes

mvrProfileDomainId mvrProfileId

Column Syntax OID

mvrProfileGropuCtlProfileId

Profile ID to index which MVR profile

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.1

mvrProfileGroupCtlId

Profile ID to index which group range in MVR profile

Integer32

Constraints:
range: 0-63

.1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.2

mvrProfileGroupStartIPAddress

MVR Profile range start IP address.

NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profil…

SNMPv2-SMIIpAddressr/w

Enumerated Values:

0	noAction
1	create
2	destory

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.3

mvrProfileGroupEndIPAddress

MVR Profile range end IP address.

NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile.

SNMPv2-SMIIpAddressr/w

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.4

mvrProfileGroupCtlAction

Set this object to create(2) to create group range. Set this object
to destory(3) to delete group range. When
the action is complete, this object becomes noAction(1).

NOTE: If mvrProfileGroupStartIPAddres…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.44.22.2.1.5

mvrDomainAssociatedProfileTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.23 · 1 row entry · 3 columns

Open in standard view

Configure MVR domain associate which MVR profile

mvrDomainAssociatedProfileEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.23.1

The entry for configuring MVR domain associate MVR profile.

Indexes

No indexes recorded

Column	Syntax	OID
mvrProfileDomainId Profile ID to index which MVR profile	Integer32 Constraints: `range: 1-4093`	`.1.3.6.1.4.1.259.10.1.43.1.44.23.1.1`
mvrProfileId Profile ID to index which MVR profile	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.44.23.1.2`
mvrProfileAction Set this object to create(1) to associate profile. Set this object to destory(2) to deassociate profile. When the action is complete, this object becomes noAction(0).	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.44.23.1.3`

mvrDomainGroupStaticTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.24 · 1 row entry · 4 columns

Open in standard view

The table for configuring the static members of the
MVR group.

mvrDomainGroupStaticEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.24.1

The entry for configuring the static members of the
MVR group.

Indexes

No indexes recorded

Column	Syntax	OID
mvrGroupStaticDomainId Profile ID to index which MVR profile	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.44.24.1.1`
mvrDomainGroupStaticAddress The multicast address of the MVR group.	SNMPv2-SMIIpAddress Constraints: `range: 1-4093` Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.43.1.44.24.1.2`
mvrDomainGroupStaticReceiverVlan The receiver vlan of this MVR group	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.44.24.1.3`
mvrDomainGroupStaticPorts The set of ports configured by management in this entry. Ports entered in this list will be the static members of this MVR group.	Q-BRIDGE-MIBPortListr/w Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.43.1.44.24.1.4`

mvrDomainGroupCurrentTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.25 · 1 row entry · 4 columns

Open in standard view

The table for the current members of the MVR group.

mvrDomainGroupCurrentEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.25.1

The entry for the current members of the MVR group.

Indexes

No indexes recorded

Column	Syntax	OID
mvrGroupCurrenDomainId Profile ID to index which MVR profile	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.44.25.1.1`
mvrDomainGroupCurrentAddress The multicast address of the MVR group.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.43.1.44.25.1.2`
mvrDomainGroupCurrentReceiverVlan This object indicates the receiver VLAN of the MVR group.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.44.25.1.3`
mvrDomainGroupCurrentPorts The complete set of ports currently associated with this MVR group.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.43.1.44.25.1.4`

mvrPortStatisticsTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.32 · 1 row entry · 14 columns

Open in standard view

Table of service per port.

mvrPortStatisticsEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.32.1

Entry of service per port.

Indexes

No indexes recorded

Column Syntax OID

mvrPortStatisticsDomainId

MVR domain ID.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.1

mvrPortStatisticsPortIndex

The port and the trunk (excluding trunk members)
interface of the mvrPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.2

mvrPortStatisticsNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.3

mvrPortStatisticsNumJoinSend

Number of join send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.4

mvrPortStatisticsNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.5

mvrPortStatisticsNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.6

mvrPortStatisticsNumLeavesSend

Number of leave send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.7

mvrPortStatisticsNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.8

mvrPortStatisticsNumGeneralQuerySend

Number of general query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.9

mvrPortStatisticsNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Constraints:
range: 1-5

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.10

mvrPortStatisticsNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.11

mvrPortStatisticsNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.12

mvrPortStatisticsNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.13

mvrPortStatisticsClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.44.32.1.14

mvrVlanStatisticsTable

table

.1.3.6.1.4.1.259.10.1.43.1.44.33 · 1 row entry · 14 columns

Open in standard view

Table of Mvr statistics VLAN.

mvrVlanStatisticsEntry entry .1.3.6.1.4.1.259.10.1.43.1.44.33.1

Entry of Mvr statistics VLAN.

Indexes

No indexes recorded

Column Syntax OID

mvrVlanStatisticsDomainId

VLAN ID

Integer32

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.1

mvrVlanStatisticsVlanId

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.2

mvrVlanStatisticsNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.3

mvrVlanStatisticsNumJoinSend

Number of join send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.4

mvrVlanStatisticsNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.5

mvrVlanStatisticsNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.6

mvrVlanStatisticsNumLeavesSend

Number of leave send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.7

mvrVlanStatisticsNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.8

mvrVlanStatisticsNumGeneralQuerySend

Number of general query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.9

mvrVlanStatisticsNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.10

mvrVlanStatisticsNumSepcificQuerySend

Number of specific query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.11

mvrVlanStatisticsNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.12

mvrVlanStatisticsNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.13

mvrVlanStatisticsClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.44.33.1.14

dhcpSnoopVlanConfigTable

table

.1.3.6.1.4.1.259.10.1.43.1.46.2.1 · 1 row entry · 2 columns

Open in standard view

A table contains DHCP Snooping configurations of existing VLANs.

dhcpSnoopVlanConfigEntry entry .1.3.6.1.4.1.259.10.1.43.1.46.2.1.1

An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN.

Indexes

No indexes recorded

Column Syntax OID

dhcpSnoopVlanIndex

This object indicates the VLAN ID on which DHCP Snooping
feature is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.46.2.1.1.1

dhcpSnoopVlanEnable

This object indicates whether DHCP Snooping is enabled in
this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.46.2.1.1.2

dhcpSnoopPortConfigTable

table

.1.3.6.1.4.1.259.10.1.43.1.46.3.1 · 1 row entry · 6 columns

Open in standard view

A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose.

dhcpSnoopPortConfigEntry entry .1.3.6.1.4.1.259.10.1.43.1.46.3.1.1

An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose.

Indexes

No indexes recorded

Column Syntax OID

dhcpSnoopPortIfIndex

The ifIndex value of the port or trunk.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.1

dhcpSnoopPortTrustEnable

This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.2

dhcpSnoopPortInformationOptionCID

This object indicates the different option that is inserted to relay agent
information circuit ID sub-option.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.3

dhcpSnoopPortInformationOptionCIDString

Inserts string in circuit ID sub-option.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.4

dhcpSnoopPortInformationOptionCIDTr101VlanField

This object indicates whether the circuit ID TR101 vlan field is enabled.

P-BRIDGE-MIBEnabledStatusr/w

Enumerated Values:

1	dynamic
2	static

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.5

dhcpSnoopPortMaxNumber

This object indicates the max client number of per port.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.46.3.1.1.6

dhcpSnoopBindingsTable

table

.1.3.6.1.4.1.259.10.1.43.1.46.4.1 · 1 row entry · 7 columns

Open in standard view

A table contains the DHCP bindings information learnt by
the device.

dhcpSnoopBindingsEntry entry .1.3.6.1.4.1.259.10.1.43.1.46.4.1.1

An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status.

Indexes

No indexes recorded

Column Syntax OID

dhcpSnoopBindingsVlanIndex

This object indicates the VLAN which a DHCP client host
belongs to.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.1

dhcpSnoopBindingsMacAddress

This object indicates the MAC address of a DHCP client
host.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.2

dhcpSnoopBindingsAddrType

This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.3

dhcpSnoopBindingsEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

Constraints:
range: 0-42

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.4

dhcpSnoopBindingsIpAddress

This object indicates the allocated IP address of
a DHCP client host.

SNMPv2-SMIIpAddress

Enumerated Values:

2	candidate
3	activeMember
4	inactiveMember

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.5

dhcpSnoopBindingsPortIfIndex

This object indicates the port or trunk where a DHCP client
host connects to.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.6

dhcpSnoopBindingsLeaseTime

This object indicates the leased time of this DHCP
bindings.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.46.4.1.1.7

clusterCandidateTable

table

.1.3.6.1.4.1.259.10.1.43.1.47.9 · 1 row entry · 3 columns

Open in standard view

A table listing cluster candidates.

clusterCandidateEntry entry .1.3.6.1.4.1.259.10.1.43.1.47.9.1

A conceptual row containing the information of the candidate.

Indexes

No indexes recorded

Column Syntax OID

clusterCandidateMacAddr

The MAC address of the candidate.

SNMPv2-TCMacAddress

Constraints:
range: 0-42

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.47.9.1.1

clusterCandidateDesc

The description of the candidate.

OctetString

Enumerated Values:

3	activeMember
4	inactiveMember

.1.3.6.1.4.1.259.10.1.43.1.47.9.1.3

clusterCandidateRole

The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : Th…

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.47.9.1.4

clusterMemberTable

table

.1.3.6.1.4.1.259.10.1.43.1.47.10 · 1 row entry · 4 columns

Open in standard view

A table listing clustering members.

clusterMemberEntry entry .1.3.6.1.4.1.259.10.1.43.1.47.10.1

A conceptual row containing the information of the member.

Indexes

No indexes recorded

Column Syntax OID

clusterMemberId

The ID of the member.

SNMPv2-SMIUnsigned32

Enumerated Values:

0	diabled
1	srcIp
2	srcIpMac

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.47.10.1.1

clusterMemberMacAddr

The MAC address of the member.

SNMPv2-TCMacAddress

Enumerated Values:

1	acl
2	mac

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.47.10.1.2

clusterMemberDesc

The description of the member.

OctetString

Constraints:
range: 1-10

.1.3.6.1.4.1.259.10.1.43.1.47.10.1.3

clusterMemberActive

The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is…

Enumeration

Constraints:
range: 1-1024

.1.3.6.1.4.1.259.10.1.43.1.47.10.1.4

ipSrcGuardConfigTable

table

.1.3.6.1.4.1.259.10.1.43.1.48.1 · 1 row entry · 5 columns

Open in standard view

A table contains the configurations to enable or disable
IP Source Guard at each port or trunk.

ipSrcGuardConfigEntry entry .1.3.6.1.4.1.259.10.1.43.1.48.1.1

An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk.

Indexes

ipSrcGuardAclBindingIpAddress ipSrcGuardAclBindingMacAddress ipSrcGuardAclBindingEntryType

Column Syntax OID

ipSrcGuardPortIfIndex

This object idents the port or trunk which is capable of
IP Source Guard feature.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.48.1.1.1

ipSrcGuardMode

This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filte…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.48.1.1.2

ipSrcGuardTableMode

This object indicates the table mode IP Source Guard select.
If the value equals 1, it means IP Source Guard choose ACL mode
to filter packet. If the value equals 2, it means IP Source
Guard choose MAC mode to filter pa…

Enumerationr/w

Enumerated Values:

1	static
2	dhcp
3	bootp

.1.3.6.1.4.1.259.10.1.43.1.48.1.1.3

ipSrcGuardAclMaxBinding

This object indicates the maximum binding number in ACL mode.
The number of IP Source Guard bindings in ACL mode will
be limited by this value.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.48.1.1.4

ipSrcGuardMacMaxBinding

This object indicates the maximum binding numer in MAC mode.
The number of IP Source Guard bindings in MAC mode will
be limited by this value.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.48.1.1.5

ipSrcGuardAclTable

table

.1.3.6.1.4.1.259.10.1.43.1.48.3 · 1 row entry · 6 columns

Open in standard view

A table contains the IP Source Guard ACL binding information
learned by the device or configured by the user.

ipSrcGuardAclEntry entry .1.3.6.1.4.1.259.10.1.43.1.48.3.1

An instance contains the IP address, Mac address, entry type,
VLAN number, interface number and status.

Indexes

No indexes recorded

Column Syntax OID

ipSrcGuardAclBindingIpAddress

This object indicates the IP address of a ACL binding entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.48.3.1.1

ipSrcGuardAclBindingMacAddress

This object indicates the MAC address of a ACL binding entry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.48.3.1.2

ipSrcGuardAclBindingEntryType

This object indicates that this binding is obtained from
dynamically learning or is a static configuraion.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.48.3.1.3

ipSrcGuardAclBindingVlanIndex

This object indicates the VLAN which a ACL binding belongs to.

Q-BRIDGE-MIBVlanIndexr/w

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.48.3.1.4

ipSrcGuardAclBindingPortIfIndex

This object indicates the port or trunk where a ACL binding associated.

IF-MIBInterfaceIndexr/w

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.48.3.1.5

ipSrcGuardAclBindingStatus

The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is avail…

SNMPv2-TCRowStatusr/w

Constraints:
range: 0-128

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.48.3.1.6

ipSrcGuardMacTable

table

.1.3.6.1.4.1.259.10.1.43.1.48.4 · 1 row entry · 6 columns

Open in standard view

A table contains the IP Source Guard MAC binding information
learned by the device or configured by the user.

ipSrcGuardMacEntry entry .1.3.6.1.4.1.259.10.1.43.1.48.4.1

An instance contains the IP address, Mac address,
VLAN number, interface number and status.

Indexes

No indexes recorded

Column Syntax OID

ipSrcGuardMacBindingMacAddress

This object indicates the MAC address of a MAC binding entry.

SNMPv2-TCMacAddress

Textual Convention: SNMPv2-TCMacAddress OctetString

Type Constraints:
range: 6

.1.3.6.1.4.1.259.10.1.43.1.48.4.1.1

ipSrcGuardMacBindingIpAddress

This object indicates the IP address of a MAC binding entry.

SNMPv2-SMIIpAddress

Textual Convention: SNMPv2-SMIIpAddress OctetString

Type Constraints:
range: 4

.1.3.6.1.4.1.259.10.1.43.1.48.4.1.2

ipSrcGuardMacBindingStartVlan

This object indicates the start VLAN which a MAC binding belongs to.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.48.4.1.3

ipSrcGuardMacBindingEndVlan

This object indicates the end VLAN which a MAC binding belongs to.

SNMPv2-SMIInteger32r/w

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.48.4.1.4

ipSrcGuardMacBindingPortList

This object indicates the port or trunk where a MAC binding associated.

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.48.4.1.5

ipSrcGuardMacBindingStatus

SNMPv2-TCRowStatusr/w

Textual Convention: SNMPv2-TCRowStatus Enumeration

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

.1.3.6.1.4.1.259.10.1.43.1.48.4.1.6

mldSnoopRouterCurrentTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.9 · 1 row entry · 2 columns

Open in standard view

Table for current router ports.

mldSnoopRouterCurrentEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.9.1

Entry for current router ports.

Indexes

No indexes recorded

Column	Syntax	OID
mldSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopRout…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.54.9.1.1`
mldSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to mldSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.43.1.54.9.1.2`

mldSnoopRouterStaticTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.10 · 1 row entry · 3 columns

Open in standard view

Table for static router ports.

mldSnoopRouterStaticEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.10.1

Entry for static router ports.

Indexes

No indexes recorded

Column Syntax OID

mldSnoopRouterStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.10.1.1

mldSnoopRouterStaticPorts

The set of ports which are static router ports.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.54.10.1.2

mldSnoopRouterStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.54.10.1.3

mldSnoopMulticastCurrentTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.11 · 1 row entry · 4 columns

Open in standard view

Table for current multicast addresses.

mldSnoopMulticastCurrentEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.11.1

Entry for current multicast addresses.

Indexes

No indexes recorded

Column	Syntax	OID
mldSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to mldSnoopMult…	SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.54.11.1.1`
mldSnoopMulticastCurrentIpAddress IPv6 address of multicast group.	INET-ADDRESS-MIBInetAddressIPv6 Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.259.10.1.43.1.54.11.1.2`
mldSnoopMulticastCurrentSourceIpAddress IPv6 address of the source.	INET-ADDRESS-MIBInetAddressIPv6 Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 `OctetString` Type Constraints: `range: 16`	`.1.3.6.1.4.1.259.10.1.43.1.54.11.1.3`
mldSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to mldSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList Textual Convention: Q-BRIDGE-MIBPortList `OctetString`	`.1.3.6.1.4.1.259.10.1.43.1.54.11.1.4`

mldSnoopMulticastStaticTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.12 · 1 row entry · 4 columns

Open in standard view

Table for static multicast addresses.

mldSnoopMulticastStaticEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.12.1

Entry for static multicast addresses.

Indexes

No indexes recorded

Column Syntax OID

mldSnoopMulticastStaticVlanIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.12.1.1

mldSnoopMulticastStaticIpAddress

IPv6 address of multicast group.

INET-ADDRESS-MIBInetAddressIPv6

Textual Convention: INET-ADDRESS-MIBInetAddressIPv6 OctetString

Type Constraints:
range: 16

.1.3.6.1.4.1.259.10.1.43.1.54.12.1.2

mldSnoopMulticastStaticPorts

The set of ports which are members.

Q-BRIDGE-MIBPortListr/w

Textual Convention: Q-BRIDGE-MIBPortList OctetString

.1.3.6.1.4.1.259.10.1.43.1.54.12.1.3

mldSnoopMulticastStaticStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.54.12.1.4

mldSnoopCurrentVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.13 · 1 row entry · 3 columns

Open in standard view

Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received.

mldSnoopCurrentVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.13.1

Entry for configuring MLD snooping.

Indexes

No indexes recorded

Column Syntax OID

mldSnoopCurrentVlanIndex

Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.

SNMPv2-SMIUnsigned32

Enumerated Values:

1	enable
2	disable

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.13.1.1

mldSnoopCurrentVlanImmediateLeave

The parameter to enable or disable the
Immediate-Leave feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.54.13.1.2

mldSnoopCurrentVlanImmediateLeaveByHostIp

The parameter to enable or disable the
Immediate-Leave by-host-ip feature on this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.54.13.1.3

mldSnoopPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.16 · 1 row entry · 15 columns

Open in standard view

Table of MLD Snooping service per port.

mldSnoopPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.16.1

Entry of MLD Snooping service per port.

Indexes

No indexes recorded

Column Syntax OID

mldSnoopPortIndex

The port and the trunk (excluding trunk members)
interface of the mldsnpPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-…

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.1

mldSnoopQueryDrop

Parameter to enable or disable dropping MLD Query packet.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.3

mldSnoopMulticastDataDrop

Parameter to enable or disable dropping IPv6 multicast data

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.4

mldSnoopPortNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.5

mldSnoopPortNumJoinSend

Number of join send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.6

mldSnoopPortNumJoins

Number of join recieved

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.7

mldSnoopPortNumJoinSuccess

Number of join group success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.8

mldSnoopPortNumLeavesSend

Number of leave send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.9

mldSnoopPortNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.10

mldSnoopPortNumGeneralQuerySend

Number of general query send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.11

mldSnoopPortNumGeneralQueryRecevied

Number of general query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.12

mldSnoopPortNumSepcificQuerySend

Number of specific query send.

SNMPv2-SMIUnsigned32

Enumerated Values:

1	permit
2	deny

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.13

mldsnoopPortNumSpecificQueryReceived

Number of specific query received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.14

mldSnoopPortNumInvalidReport

Number of invalid report received.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.15

mldSnoopPortClearStatistics

Clear this VLAN all statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.54.16.1.16

mldSnoopProfileTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.18 · 1 row entry · 3 columns

Open in standard view

The table for configuring the MLD snooping profile.

mldSnoopProfileEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.18.1

The entry for configuring the MLD snooping profile.

Indexes

No indexes recorded

Column Syntax OID

mldSnoopProfileId

The ID of the MLD snooping profile.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.18.1.1

mldSnoopProfileAction

The access mode of the MLD snooping profile.

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.54.18.1.2

mldSnoopProfileStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Enumerated Values:

1	permit
2	deny

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.54.18.1.3

mldSnoopProfileRangeTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.20 · 1 row entry · 5 columns

Open in standard view

The table for configuring the range of the MLD snooping
profile.

mldSnoopProfileRangeEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.20.1

The entry for configuring the range of the MLD snooping
profile.

Indexes

mldSnoopFilterPortIndex

Column Syntax OID

mldSnoopProfileRangeProfileId

This is defined as mldSnoopProfileId.

Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.54.20.1.1

mldSnoopProfileRangeInetAddressType

The address type is associated with this agent.
Only ipv6(2) type is supported.

INET-ADDRESS-MIBInetAddressType

Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.259.10.1.43.1.54.20.1.2

mldSnoopProfileRangeStartInetAddress

The specified addresses in the start of the controlled
IPv6 multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.54.20.1.3

mldSnoopProfileRangeEndInetAddress

The specified addresses in the end of the controlled
IPv6 multicast addresses.

INET-ADDRESS-MIBInetAddress

Textual Convention: INET-ADDRESS-MIBInetAddress OctetString

Type Constraints:
range: 0..255

.1.3.6.1.4.1.259.10.1.43.1.54.20.1.4

mldSnoopProfileRangeAction

The access mode of the MLD snooping profile.

Enumeration

.1.3.6.1.4.1.259.10.1.43.1.54.20.1.5

mldSnoopFilterPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.21 · 1 row entry · 2 columns

Open in standard view

Table for port configuration in MLD filtering.

mldSnoopFilterPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.21.1

Entry for port configuration in MLD filtering.

Indexes

No indexes recorded

Column	Syntax	OID
mldSnoopFilterPortIndex The port and trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIUnsigned32 Constraints: `range: 0-256` Textual Convention: SNMPv2-SMIUnsigned32 `Unsigned32` Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.259.10.1.43.1.54.21.1.1`
mldSnoopFilterPortProfileId The mldSnoopProfileEntry identified by a particular value of this index is the same interface identified by the same value of the mldSnoopProfileId object. If there is no corresponding entry in the mldSnoopProfileTable,…	SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.54.21.1.2`

mldSnoopThrottlePortTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.22 · 1 row entry · 5 columns

Open in standard view

Table for port configuration in MLD throttling.

mldSnoopThrottlePortEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.22.1

Entry for port configuration in MLD throttling.

Indexes

mldSnoopVlanIndex

Column Syntax OID

mldSnoopThrottlePortIndex

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.22.1.1

mldSnoopThrottlePortRunningStatus

Describes the running status of the MLD throttling to the switch.
A value of true(1) indicates the MLD throttling mechanism is active.
A value of false(2) indicates the MLD throttling mechanism is inactive.

SNMPv2-TCTruthValue

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.54.22.1.2

mldSnoopThrottlePortAction

The action mode of the MLD throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an MLD report and the number of current joined multicast groups
is equal to the …

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.54.22.1.3

mldSnoopThrottlePortMaxGroups

The maximum number of MLD groups that the interface can join.

Integer32r/w

.1.3.6.1.4.1.259.10.1.43.1.54.22.1.4

mldSnoopThrottlePortCurrentGroups

The current number of MLD groups that the interface has joined.

SNMPv2-SMIInteger32

Textual Convention: SNMPv2-SMIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.259.10.1.43.1.54.22.1.5

mldSnoopVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.54.24 · 1 row entry · 13 columns

Open in standard view

Table of MLD Snooping service per port.

mldSnoopVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.54.24.1

Entry of MLD Snooping service per VLAN.

Indexes

No indexes recorded

Column Syntax OID

mldSnoopVlanIndex

VLAN ID

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.1

mldSnoopVlanNumGroups

Current learned groups

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.2

mldSnoopVlanNumJoinSend

Number of join send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.3

mldSnoopVlanNumJoins

Number of join received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.4

mldSnoopVlanNumJoinSuccess

Number of jion success

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.5

mldSnoopVlanNumLeavesSend

Number of leave send.

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.6

mldSnoopVlanNumLeaves

Number of leave received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.7

mldSnoopVlanNumGeneralQuerySend

Number of general query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.8

mldSnoopVlanNumGeneralQueryRecevied

Number of general query received

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.9

mldSnoopVlanNumSepcificQuerySend

Number of specific query send

SNMPv2-SMIUnsigned32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.10

mldsnoopVlanNumSpecificQueryReceived

Number of sepcific query received

SNMPv2-SMIUnsigned32

Constraints:
range: 0-32

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.11

mldSnoopVlanNumInvalidReport

Number of invalid report received

SNMPv2-SMIUnsigned32

Enumerated Values:

1	static
2	dynamic

Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.12

mldSnoopVlanClearStatistics

Clear this VLAN statistics

SNMPv2-TCTruthValuer/w

Textual Convention: SNMPv2-TCTruthValue Enumeration

Type Values:

1	true
2	false

.1.3.6.1.4.1.259.10.1.43.1.54.24.1.13

daiVlanTable

table

.1.3.6.1.4.1.259.10.1.43.1.56.2.1 · 1 row entry · 4 columns

Open in standard view

A table contains dynamic ARP inspection configurations
for existing VLANs.

daiVlanEntry entry .1.3.6.1.4.1.259.10.1.43.1.56.2.1.1

An instance containing the configuration of dynamic ARP
inspection for each existing VLAN.

Indexes

No indexes recorded

Column Syntax OID

daiVlanIndex

This object indicates the VLAN ID on which dynamic ARP
inspection is configured.

Q-BRIDGE-MIBVlanIndex

Textual Convention: Q-BRIDGE-MIBVlanIndex Unsigned32

.1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.1

daiVlanStatus

This object indicates whether dynamic ARP inspection
is enabled in this VLAN.

P-BRIDGE-MIBEnabledStatusr/w

Constraints:
range: 0-2048
range: 4294967295-4294967295

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.2

daiVlanArpAclName

Specifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2).

OctetStringr/w

.1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.3

daiVlanArpAclStatus

Set to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default v…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.56.2.1.1.4

daiPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.56.3.1 · 1 row entry · 3 columns

Open in standard view

A table containing dynamic ARP inspection configurations
for port interfaces.

daiPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.56.3.1.1

An instance containing the configuration of dynamic ARP
inspection at each port interface.

Indexes

No indexes recorded

Column Syntax OID

daiPortIfIndex

The ifIndex value of the port.

IF-MIBInterfaceIndex

Textual Convention: IF-MIBInterfaceIndex Integer32

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.259.10.1.43.1.56.3.1.1.1

daiPortTrustStatus

This object indicates whether the port is trusted for
dynamic ARP inspection.

P-BRIDGE-MIBEnabledStatusr/w

Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.56.3.1.1.2

daiPortRateLimit

The value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit.

Unsigned32r/w

.1.3.6.1.4.1.259.10.1.43.1.56.3.1.1.3

daiLogTable

table

.1.3.6.1.4.1.259.10.1.43.1.56.4.1 · 1 row entry · 7 columns

Open in standard view

A table containing dynamic ARP inspection log
information.

daiLogEntry entry .1.3.6.1.4.1.259.10.1.43.1.56.4.1.1

An instance containing log information of dynamic ARP
inspection at each VLAN interface.

Indexes

No indexes recorded

Column	Syntax	OID
daiLogIndex This object indicates the index of dynamic ARP inspection log information.	Integer32	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.1`
daiLogVlan This object indicates the VLAN ID of dynamic ARP inspection log information.	Q-BRIDGE-MIBVlanIndex Textual Convention: Q-BRIDGE-MIBVlanIndex `Unsigned32`	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.2`
daiLogPort This object indicates the ifIndex of dynamic ARP inspection log information.	IF-MIBInterfaceIndex Constraints: `range: 0-49` Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.3`
daiLogSrcIpAddress The source IP address of dynamic ARP inspection log information.	SNMPv2-SMIIpAddress Constraints: `range: 1-32` Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.4`
daiLogDestIpAddress The destination IP address of dynamic ARP inspection log information.	SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress `OctetString` Type Constraints: `range: 4`	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.5`
daiLogSrcMacAddress The source MAC address of dynamic ARP inspection log information.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.6`
daiLogDestMacAddress The destination MAC address of dynamic ARP inspection log information.	SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress `OctetString` Type Constraints: `range: 6`	`.1.3.6.1.4.1.259.10.1.43.1.56.4.1.1.7`

timeRangeTable

table

.1.3.6.1.4.1.259.10.1.43.1.61.1 · 1 row entry · 3 columns

Open in standard view

Table for time range.

timeRangeEntry entry .1.3.6.1.4.1.259.10.1.43.1.61.1.1

Entry for time range.

Indexes

No indexes recorded

Column Syntax OID

timeRangeIndex

The index of time range entry.

Integer32

Constraints:
range: 0-23

.1.3.6.1.4.1.259.10.1.43.1.61.1.1.1

timeRangeName

The name of time range entry.

OctetStringr/w

Constraints:
range: 0-59

.1.3.6.1.4.1.259.10.1.43.1.61.1.1.2

timeRangeStatus

Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry.

ValidStatusr/w

Enumerated Values:

0	sunday
1	monday
2	tuesday
3	wednesday
4	thursday
5	friday
6	saturday
7	daily
8	weekdays
9	weekend

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.61.1.1.3

timeRangePeriodicTable

table

.1.3.6.1.4.1.259.10.1.43.1.61.2 · 1 row entry · 8 columns

Open in standard view

Table for periodic time-range entries.

timeRangePeriodicEntry entry .1.3.6.1.4.1.259.10.1.43.1.61.2.1

Entry for periodic time-range.

Indexes

No indexes recorded

Column Syntax OID

timeRangePeriodicTimeRangeIndex

The index of time range. The object
should exist in timeRangeIndex of timeRangeTable.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.1

timeRangePeriodicStartDaysOfTheWeek

Specifies the start days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, Monday... or Saturday
then the end days-of-the-week shall be set to Sunday, Monday..., or Satu…

Enumerationr/w

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.2

timeRangePeriodicStartHours

Specifies the start hours of the periodic time-range entry.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.3

timeRangePeriodicStartMinutes

Specifies the start minutess of the periodic time-range entry.

Integer32

Constraints:
range: 0-49

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.4

timeRangePeriodicEndDaysOfTheWeek

Specifies the end days-of-the-week of the periodic time-range entry.
1. If the start days-of-the-week is set to Sunday, Monday... or Saturday
then the end days-of-the-week shall be set to Sunday, Monday..., or Saturd…

Enumerationr/w

Constraints:
range: 2013-2037
range: 65535-65535

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.5

timeRangePeriodicEndHours

Specifies the end hours of the periodic time-range entry.

Integer32

Constraints:
range: 1-12
range: 255-255

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.6

timeRangePeriodicEndMinutes

Specifies the end minutess of the periodic time-range entry.

Integer32

Constraints:
range: 1-31
range: 255-255

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.7

timeRangePeriodicStatus

Setting this to valid(1) creates an periodic entry.
Setting this to invalid(2) destroys an periodic entry.

ValidStatusr/w

Constraints:
range: 0-23
range: 255-255

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.61.2.1.8

timeRangeAbsoluteTable

table

.1.3.6.1.4.1.259.10.1.43.1.61.3 · 1 row entry · 12 columns

Open in standard view

Table for absolute time-range entries.

timeRangeAbsoluteEntry entry .1.3.6.1.4.1.259.10.1.43.1.61.3.1

Entry for absolute time-range.

Indexes

No indexes recorded

Column Syntax OID

timeRangeAbsoluteTimeRangeIndex

The index of time range. The object
should exist in timeRangeIndex of timeRangeTable.

Integer32

Constraints:
range: 1-12
range: 255-255

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.1

timeRangeAbsoluteStartYears

Specifies the start years of the absolute time-range entry.
65535 means don't care.

Integer32

Constraints:
range: 1-31
range: 255-255

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.2

timeRangeAbsoluteStartMonths

Specifies the start months of the absolute time-range entry.
255 means don't care.

Integer32

Constraints:
range: 0-23
range: 255-255

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.3

timeRangeAbsoluteStartDays

Specifies the start days of the absolute time-range entry.
255 means don't care.

Integer32

Constraints:
range: 0-59
range: 255-255

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.4

timeRangeAbsoluteStartHours

Specifies the start hours of the absolute time-range entry.\
255 means don't care.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.5

timeRangeAbsoluteStartMinutes

Specifies the start minutes of the absolute time-range entry.\
255 means don't care.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.6

timeRangeAbsoluteEndYears

Specifies the end years of the absolute time-range entry.
65535 means don't care.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.7

timeRangeAbsoluteEndMonths

Specifies the end months of the absolute time-range entry.
255 means don't care.

Integer32

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.8

timeRangeAbsoluteEndDays

Specifies the end days of the absolute time-range entry.
255 means don't care.

Integer32

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.9

timeRangeAbsoluteEndHours

Specifies the end hours of the absolute time-range entry.\
255 means don't care.

Integer32

Enumerated Values:

1	normal
2	looped

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.10

timeRangeAbsoluteEndMinutes

Specifies the end minutes of the absolute time-range entry.\
255 means don't care.

Integer32

Constraints:
range: 0-512

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.11

timeRangeAbsoluteStatus

Setting this to valid(1) creates an absolute entry.
Setting this to invalid(2) destroys an absolute entry.

ValidStatusr/w

Textual Convention: ValidStatus Enumeration

Type Values:

1	valid
2	invalid

.1.3.6.1.4.1.259.10.1.43.1.61.3.1.12

lbdPortTable

table

.1.3.6.1.4.1.259.10.1.43.1.63.2.1 · 1 row entry · 4 columns

Open in standard view

A table containing LBD configurations for all interfaces.

lbdPortEntry entry .1.3.6.1.4.1.259.10.1.43.1.63.2.1.1

An instance containing the configuration of LBD at each
interface.

Indexes

No indexes recorded

Column	Syntax	OID
lbdPortIfIndex The ifIndex value of the port.	IF-MIBInterfaceIndex Textual Convention: IF-MIBInterfaceIndex `Integer32` Type Constraints: `range: 1..2147483647`	`.1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.1`
lbdPortAdminState The LBD administrative port status.	Enumerationr/w	`.1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.2`
lbdPortOperState The LBD operative port status.	Enumeration	`.1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.3`
lbdPortLoopedVlan The list of VLANs on which loopback is detected. Only when oper state is looped and mode is VLAN-based, the value is nonzero.	OctetString	`.1.3.6.1.4.1.259.10.1.43.1.63.2.1.1.4`