DOCS-SUBMGT3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
53
.1.3.6.1.4.1.4491.2.1.10.1.2 · 1 row entry · 6 columns
This object maintains per-CM traffic policies enforced 
by the CMTS. The CMTS acquires the CM traffic policies 
through the CM registration process, or in the 
absence of some or all of those parameters, from the 
Base object. The CM information and controls are meaningful 
and used by the CMTS, but only after the CM is 
operational.
docsSubmgt3CpeCtrlEntry entry .1.3.6.1.4.1.4491.2.1.10.1.2.1
The conceptual row of docsSubmgt3CpeCtrlTable.
The CMTS does not persist the instances of the CpeCtrl
object across reinitializations.
Indexes
No indexes recorded
Column Syntax OID
docsSubmgt3CpeCtrlMaxCpeIpv4
This attribute represents the number of simultaneous
IP v4 addresses permitted for CPE connected to the CM.
When the MaxCpeIpv4 attribute is set to zero (0), all Ipv4 CPE
traffic from the CM is dropped. The CMTS conf…
Unsigned32r/w
Constraints:
range: 0-1023
.1.3.6.1.4.1.4491.2.1.10.1.2.1.1
docsSubmgt3CpeCtrlMaxCpeIpv6Prefix
This attribute represents the number of simultaneous
IPv6 prefixes permitted for CPE connected to the
CM.
When the MaxCpeIpv6Prefix is set to zero (0), all IPv6 CPE
traffic from the CM is dropped. The CMTS configu…
Unsigned32r/w
Constraints:
range: 0-1023
.1.3.6.1.4.1.4491.2.1.10.1.2.1.2
docsSubmgt3CpeCtrlActive
This attribute controls the application of subscriber
management to this CM. If this is set to 'true',
CMTS-based CPE control is active, and all the actions
required by the various filter policies and controls
apply…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.4491.2.1.10.1.2.1.3
docsSubmgt3CpeCtrlLearnable
This attribute controls whether the CMTS may learn
(and pass traffic for) CPE IP addresses associated
with a CM. If this is set to 'true', the CMTS may learn up
to the CM MaxCpeIp value less any DOCSIS-provisioned
e…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.4491.2.1.10.1.2.1.4
docsSubmgt3CpeCtrlReset
If set to 'true', this attribute commands the CMTS
to delete the instances denoted as 'learned' addresses
in the CpeIp object. This attribute always returns
false on read.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.4491.2.1.10.1.2.1.5
docsSubmgt3CpeCtrlLastReset
This attribute represents the system Up Time of the
last set to 'true' of the Reset attribute of this instance.
Zero if never reset.
SNMPv2-TCTimeStampr/w
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
.1.3.6.1.4.1.4491.2.1.10.1.2.1.6
.1.3.6.1.4.1.4491.2.1.10.1.3 · 1 row entry · 6 columns
This object defines the list of IP Addresses behind 
the CM known by the CMTS. 
          
If the Active attribute of the CpeCtrl object associated 
with a CM is set to 'true' and the CMTS receives an 
IP packet from a CM that contains a source IP address that 
does not match one of the CPE IP addresses associated 
with this CM, one of two things occurs. If the number 
of CPE IPs is less than the MaxCpeIp of the CpeCtrl object 
for that CM, the source IP address is added to this 
object and the packet is forwarded; otherwise, the 
packet is dropped.
docsSubmgt3CpeIpEntry entry .1.3.6.1.4.1.4491.2.1.10.1.3.1
The conceptual row of docsSubmgt3CpeIpTable.
Indexes
DOCS-IF3-MIBdocsIf3CmtsCmRegStatusId docsSubmgt3CpeIpId
Column Syntax OID
docsSubmgt3CpeIpId
This attribute represents a unique identifier for
a CPE IP of the CM. An instance of this attribute exists
for each CPE provisioned in the 'Subscriber Management
CPE IPv4 Table' or 'Subscriber Management CPE
IPv6 Ta…
Unsigned32
Constraints:
range: 1-1023
.1.3.6.1.4.1.4491.2.1.10.1.3.1.1
docsSubmgt3CpeIpAddrType
The type of Internet address of the Addr attribute.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4491.2.1.10.1.3.1.2
docsSubmgt3CpeIpAddr
This attribute represents the IP address either set
from provisioning or learned via address gleaning
or other forwarding means.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.10.1.3.1.3
docsSubmgt3CpeIpAddrPrefixLen
This attribute represents the prefix length associated with
the IP subnet prefix either set from provisioning or learned
via address gleaning or other forwarding means. For IPv4 CPE
addresses this attribute generally…
INET-ADDRESS-MIBInetAddressPrefixLength
Textual Convention: INET-ADDRESS-MIBInetAddressPrefixLength Unsigned32
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.4491.2.1.10.1.3.1.4
docsSubmgt3CpeIpLearned
This attribute is set to 'true' when the IP address
was learned from IP packets sent upstream rather than
via the CM provisioning process.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.4491.2.1.10.1.3.1.5
docsSubmgt3CpeIpType
This attribute represents the type of CPE based on
the following classification below:
'cpe' Regular CPE clients.
'ps' CableHome Portal Server (PS)
'mta' PacketCable Multimedi…
Enumeration
Enumerated Values:
1cpe
2ps
3mta
4stb
5tea
6erouter
.1.3.6.1.4.1.4491.2.1.10.1.3.1.6
.1.3.6.1.4.1.4491.2.1.10.1.4 · 1 row entry · 12 columns
This object defines the set of downstream and upstream 
filter groups that the CMTS applies to traffic associated 
with that CM.
docsSubmgt3GrpEntry entry .1.3.6.1.4.1.4491.2.1.10.1.4.1
The conceptual row of docsSubmgt3GrpTable.
The CMTS does not persist the instances of the Grp
object across reinitializations.
Indexes
No indexes recorded
Column Syntax OID
docsSubMgt3GrpUdcGroupIds
This attribute represents the filter group(s) associated
with the CM signaled 'Upstream Drop Classifier Group ID'
encodings during the registration process. UDC Group IDs are
integer values and this attribute report…
SNMP-TARGET-MIBSnmpTagListr/w
Textual Convention: SNMP-TARGET-MIBSnmpTagList OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.10.1.4.1.1
docsSubMgt3GrpUdcSentInRegRsp
This attribute represents the CMTS upstream filtering
status for this CM. The value 'true' indicates that the
CMTS has sent UDCs to the CM during registration process.

In order for a CMTS to send U…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.4491.2.1.10.1.4.1.2
docsSubmgt3GrpSubFilterDs
This attribute represents the filter group applied
to traffic destined for subscriber's CPE attached to the
referenced CM (attached to CM CPE interfaces). This
value corresponds to the 'Subscriber Downstream
Group' …
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.3
docsSubmgt3GrpSubFilterUs
This attribute represents the filter group applied
to traffic originating from subscriber's CPE attached
to the referenced CM (attached to CM CPE interfaces).
This value corresponds to the 'Subscriber Upstream
Group…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.4
docsSubmgt3GrpCmFilterDs
This attribute represents the filter group applied
to traffic destined for the CM itself. This value corresponds
to the 'CM Downstream Group' value of the
'Subscriber Management Filter Groups' encoding signaled
duri…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.5
docsSubmgt3GrpCmFilterUs
This attribute represents the filter group applied
to traffic originating from the CM itself. This value
corresponds to the 'Subscriber Upstream Group'
value of the 'Subscriber Management Filter Groups'
encoding sig…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.6
docsSubmgt3GrpPsFilterDs
This attribute represents the filter group applied
to traffic destined to the Embedded CableHome Portal
Services Element or the Embedded Router on the referenced
CM. This value corresponds to the 'PS Downstream
Grou…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.7
docsSubmgt3GrpPsFilterUs
This attribute represents the filter group applied
to traffic originating from the Embedded CableHome
Portal Services Element or Embedded Router on the
referenced CM. This value corresponds to the 'PS Upstream
Group…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.8
docsSubmgt3GrpMtaFilterDs
This attribute represents the filter group applied
to traffic destined to the Embedded Multimedia Terminal
Adapter on the referenced CM. This value corresponds
to the 'MTA Downstream Group' value of the 'Subscriber
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.9
docsSubmgt3GrpMtaFilterUs
This attribute represents the filter group applied
to traffic originating from the Embedded Multimedia
Terminal Adapter on the referenced CM. This value
corresponds to the 'MTA Upstream Group' value of the
'Subscrib…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.10
docsSubmgt3GrpStbFilterDs
This attribute represents the filter group applied
to traffic destined for the Embedded Set-Top Box on
the referenced CM. This value corresponds to the 'STB
Downstream Group' value of the 'Subscriber Management
Filt…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.11
docsSubmgt3GrpStbFilterUs
This attribute represents the filter group applied
to traffic originating from the Embedded Set-Top
Box on the referenced CM. This value corresponds to the
'STB Upstream Group' value of the 'Subscriber Management
Fi…
Unsigned32r/w
Constraints:
range: 0-1024
.1.3.6.1.4.1.4491.2.1.10.1.4.1.12
.1.3.6.1.4.1.4491.2.1.10.1.5 · 1 row entry · 29 columns
This object describes a set of filter or classifier 
criteria. Classifiers are assigned by group to the 
individual CMs. That assignment is made via the 'Subscriber 
Management TLVs' encodings sent upstream from 
the CM to the CMTS during registration or in their 
absence, default values configured in the CMTS. 
A Filter Group ID (GrpId) is a set of rules that correspond 
to the expansion of a UDC Group ID into UDC individual  
classification rules.  The Filter Group Ids are generated  
whenever the CMTS is configured to send UDCs during the CM  
registration process. Implementation of L2 classification  
criteria is optional for the CMTS; LLC/MAC upstream and  
downstream filter criteria can be ignored during the packet 
matching process.
docsSubmgt3FilterGrpEntry entry .1.3.6.1.4.1.4491.2.1.10.1.5.1
The conceptual row of docsSubmgt3FilterGrpTable.
The CMTS persists all instances of the FilterGrp object
across reinitializations.
Indexes
docsSubmgt3FilterGrpGrpId docsSubmgt3FilterGrpRuleId
Column Syntax OID
docsSubmgt3FilterGrpGrpId
This key is an identifier for a set of classifiers known
as a filter group. Each CM may be associated with
several filter groups for its upstream and downstream
traffic, one group per target end point on the CM as
d…
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.1
docsSubmgt3FilterGrpRuleId
This key represents an ordered classifier identifier
within the group. Filters are applied in order if
the Priority attribute is not supported.
Unsigned32
Constraints:
range: 1-65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.2
docsSubmgt3FilterGrpAction
This attribute represents the action to take upon
this filter matching. 'permit' means to stop the classification
matching and accept the packet for further
processing. 'deny' means to drop the packet.
Enumerationr/w
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.4491.2.1.10.1.5.1.3
docsSubmgt3FilterGrpPriority
This attribute defines the order in which classifiers
are compared against packets. The higher the value,
the higher the priority.
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.4
docsSubmgt3FilterGrpIpTosLow
This attribute represents the low value of a range
of ToS (Type of Service) octet values. This object is
defined as an 8-bit octet as per the DOCSIS Specification
for packet classification.
The IP ToS octet, as orig…
OctetStringr/w
Constraints:
range: 1-1
.1.3.6.1.4.1.4491.2.1.10.1.5.1.5
docsSubmgt3FilterGrpIpTosHigh
This attribute represents the high value of a range
of ToS octet values. This object is defined as an 8-bit
octet as per the DOCSIS Specification for packet classification.
The IP ToS octet, as originally defined in …
OctetStringr/w
Constraints:
range: 1-1
.1.3.6.1.4.1.4491.2.1.10.1.5.1.6
docsSubmgt3FilterGrpIpTosMask
This attribute represents the mask value that is bitwise
ANDed with ToS octet in an IP packet, and the resulting value
is used for range checking of IpTosLow and IpTosHigh.
OctetStringr/w
Constraints:
range: 1-1
.1.3.6.1.4.1.4491.2.1.10.1.5.1.7
docsSubmgt3FilterGrpIpProtocol
This attribute represents the value of the IP Protocol
field required for IP packets to match this rule.
The value 256 matches traffic with any IP Protocol value.
The value 257 by convention matches both TCP and
UDP.
Unsigned32r/w
Constraints:
range: 0-257
.1.3.6.1.4.1.4491.2.1.10.1.5.1.8
docsSubmgt3FilterGrpInetAddrType
The type of the Internet address for InetSrcAddr,
InetSrcMask, InetDestAddr, and InetDestMask.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.4491.2.1.10.1.5.1.9
docsSubmgt3FilterGrpInetSrcAddr
This attribute specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet's IP Source Address
bitwise ANDed with the InetSrcMask value equals
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.10.1.5.1.10
docsSubmgt3FilterGrpInetSrcMask
This attribute represents which bits of a packet's
IP Source Address are compared to match this rule. An
IP packet matches the rule when the packet's IP Source
Address bitwise ANDed with the InetSrcMask value equals …
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.10.1.5.1.11
docsSubmgt3FilterGrpInetDestAddr
This attribute specifies the value of the IP Destination
Address required for packets to match this rule.
An IP packet matches the rule when the packet's IP Destination
Address bitwise ANDed with the InetSrcMask
val…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.10.1.5.1.12
docsSubmgt3FilterGrpInetDestMask
This attribute represents which bits of a packet's
IP Destination Address are compared to match this rule.
An IP packet matches the rule when the packet's IP Destination
Address bitwise ANDed with the InetDestMask va…
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.4491.2.1.10.1.5.1.13
docsSubmgt3FilterGrpSrcPortStart
This attribute represents the low-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.14
docsSubmgt3FilterGrpSrcPortEnd
This attribute represents the high-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.15
docsSubmgt3FilterGrpDestPortStart
This attribute represents the low-end inclusive
range of TCP/UDP destination port numbers to which a
packet is compared. This attribute is irrelevant for
non-TCP/UDP IP packets.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.16
docsSubmgt3FilterGrpDestPortEnd
This attribute represents the high-end inclusive
range of TCP/UDP destination port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets.
INET-ADDRESS-MIBInetPortNumberr/w
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.17
docsSubmgt3FilterGrpDestMacAddr
This attribute represents the criteria to match against
an Ethernet packet MAC address bitwise ANDed
with DestMacMask.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.4491.2.1.10.1.5.1.18
docsSubmgt3FilterGrpDestMacMask
An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
the DestMacMask attribute equals the value of
the DestMacAddr attribute.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.4491.2.1.10.1.5.1.19
docsSubmgt3FilterGrpSrcMacAddr
This attribute represents the value to match against
an Ethernet packet source MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.4491.2.1.10.1.5.1.20
docsSubmgt3FilterGrpEnetProtocolType
This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matching criteria. A value of 'ethertype'
mean…
Enumerationr/w
Enumerated Values:
0none
1ethertype
2dsap
3mac
4all
.1.3.6.1.4.1.4491.2.1.10.1.5.1.21
docsSubmgt3FilterGrpEnetProtocol
This attribute represents the Ethernet protocol
type to be matched against the packets. For EnetProtocolType
set to 'none', this attribute is ignored when considering
whether a packet matches the current rule.
If th…
Unsigned32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.4491.2.1.10.1.5.1.22
docsSubmgt3FilterGrpUserPriLow
This attribute applies only to Ethernet frames using
the 802.1p/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority field and a 12-bit VLAN number.
Tagged …
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.4491.2.1.10.1.5.1.23
docsSubmgt3FilterGrpUserPriHigh
This attribute applies only to Ethernet frames using
the 802.1p/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority field and a 12-bit VLAN number.
Tagged …
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.4491.2.1.10.1.5.1.24
docsSubmgt3FilterGrpVlanId
This attribute applies only to Ethernet frames using
the 802.1p/Q tag header. Tagged packets must have
a VLAN Identifier that matches the value in order to
match the rule.
Unsigned32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.4491.2.1.10.1.5.1.25
docsSubmgt3FilterGrpClassPkts
This attribute counts the number of packets
that have been classified (matched) using this rule
entry. This includes all packets delivered to a Service
Flow maximum rate policing function, whether
or not that functi…
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
.1.3.6.1.4.1.4491.2.1.10.1.5.1.26
docsSubmgt3FilterGrpFlowLabel
This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against pa…
Unsigned32r/w
Constraints:
range: 0-1048575
.1.3.6.1.4.1.4491.2.1.10.1.5.1.27
docsSubmgt3FilterGrpCmInterfaceMask
This attribute represents a bit-mask of the CM in-bound
interfaces to which this classifier applies.
This attribute only applies to upstream Drop Classifiers
being sent to CMs during the registration process.
DOCS-L2VPN-MIBDocsL2vpnIfListr/w
Textual Convention: DOCS-L2VPN-MIBDocsL2vpnIfList Bits
Type Values:
0eCm
1cmci
2docsCableMacLayer
3docsCableDownstream
4docsCableUpstream
16eMta
17eStbIp
18eStbDsg
.1.3.6.1.4.1.4491.2.1.10.1.5.1.28
docsSubmgt3FilterGrpRowStatus
The conceptual row status of this object.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.4491.2.1.10.1.5.1.29