docsSubmgt3FilterGrpInetDestMask
DOCS-SUBMGT3-MIB ·
.1.3.6.1.4.1.4491.2.1.10.1.5.1.13
Object
This attribute represents which bits of a packet's IP Destination Address are compared to match this rule. An IP packet matches the rule when the packet's IP Destination Address bitwise ANDed with the InetDestMask value equals the InetDestAddr value. The address type of this object is specified by InetAddrType.
Context
- MIB
- DOCS-SUBMGT3-MIB
- OID
.1.3.6.1.4.1.4491.2.1.10.1.5.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- docsSubmgt3FilterGrpEntry
- Table
- docsSubmgt3FilterGrpTable
- Siblings
- 28
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| docsSubmgt3FilterGrpGrpId This key is an identifier for a set of classifiers known
as a filter group. Each CM may be associated with
several filter groups for its upstream and downstream
traffic, one gr… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.1 |
| docsSubmgt3FilterGrpInetSrcAddr This attribute specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet's IP Source Address
bitwise A… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.10.1.5.1.10 |
| docsSubmgt3FilterGrpInetSrcMask This attribute represents which bits of a packet's
IP Source Address are compared to match this rule. An
IP packet matches the rule when the packet's IP Source
Address bitwise … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.10.1.5.1.11 |
| docsSubmgt3FilterGrpInetDestAddr This attribute specifies the value of the IP Destination
Address required for packets to match this rule.
An IP packet matches the rule when the packet's IP Destination
Address… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.4491.2.1.10.1.5.1.12 |
| docsSubmgt3FilterGrpSrcPortStart This attribute represents the low-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.10.1.5.1.14 |
| docsSubmgt3FilterGrpSrcPortEnd This attribute represents the high-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.10.1.5.1.15 |
| docsSubmgt3FilterGrpDestPortStart This attribute represents the low-end inclusive
range of TCP/UDP destination port numbers to which a
packet is compared. This attribute is irrelevant for
non-TCP/UDP IP packets. | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.10.1.5.1.16 |
| docsSubmgt3FilterGrpDestPortEnd This attribute represents the high-end inclusive
range of TCP/UDP destination port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packet… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.4491.2.1.10.1.5.1.17 |
| docsSubmgt3FilterGrpDestMacAddr This attribute represents the criteria to match against
an Ethernet packet MAC address bitwise ANDed
with DestMacMask. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.10.1.5.1.18 |
| docsSubmgt3FilterGrpDestMacMask An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
the DestMacMask attribute equals the value of
the DestMacAddr attribute. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.10.1.5.1.19 |
| docsSubmgt3FilterGrpRuleId This key represents an ordered classifier identifier
within the group. Filters are applied in order if
the Priority attribute is not supported. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.2 |
| docsSubmgt3FilterGrpSrcMacAddr This attribute represents the value to match against
an Ethernet packet source MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.4491.2.1.10.1.5.1.20 |
| docsSubmgt3FilterGrpEnetProtocolType This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matchin… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.10.1.5.1.21 |
| docsSubmgt3FilterGrpEnetProtocol This attribute represents the Ethernet protocol
type to be matched against the packets. For EnetProtocolType
set to 'none', this attribute is ignored when considering
whether a… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.22 |
| docsSubmgt3FilterGrpUserPriLow This attribute applies only to Ethernet frames using
the 802.1p/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.23 |
| docsSubmgt3FilterGrpUserPriHigh This attribute applies only to Ethernet frames using
the 802.1p/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.24 |
| docsSubmgt3FilterGrpVlanId This attribute applies only to Ethernet frames using
the 802.1p/Q tag header. Tagged packets must have
a VLAN Identifier that matches the value in order to
match the rule. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.25 |
| docsSubmgt3FilterGrpClassPkts This attribute counts the number of packets
that have been classified (matched) using this rule
entry. This includes all packets delivered to a Service
Flow maximum rate polici… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.26 |
| docsSubmgt3FilterGrpFlowLabel This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the … | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.27 |
| docsSubmgt3FilterGrpCmInterfaceMask This attribute represents a bit-mask of the CM in-bound
interfaces to which this classifier applies.
This attribute only applies to upstream Drop Classifiers
being sent to CMs… | column | DOCS-L2VPN-MIBDocsL2vpnIfList | .1.3.6.1.4.1.4491.2.1.10.1.5.1.28 |
| docsSubmgt3FilterGrpRowStatus The conceptual row status of this object. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4491.2.1.10.1.5.1.29 |
| docsSubmgt3FilterGrpAction This attribute represents the action to take upon
this filter matching. 'permit' means to stop the classification
matching and accept the packet for further
processing. 'deny… | column | Enumeration | .1.3.6.1.4.1.4491.2.1.10.1.5.1.3 |
| docsSubmgt3FilterGrpPriority This attribute defines the order in which classifiers
are compared against packets. The higher the value,
the higher the priority. | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.4 |
| docsSubmgt3FilterGrpIpTosLow This attribute represents the low value of a range
of ToS (Type of Service) octet values. This object is
defined as an 8-bit octet as per the DOCSIS Specification
for packet cl… | column | OctetString | .1.3.6.1.4.1.4491.2.1.10.1.5.1.5 |
| docsSubmgt3FilterGrpIpTosHigh This attribute represents the high value of a range
of ToS octet values. This object is defined as an 8-bit
octet as per the DOCSIS Specification for packet classification.
The… | column | OctetString | .1.3.6.1.4.1.4491.2.1.10.1.5.1.6 |
| docsSubmgt3FilterGrpIpTosMask This attribute represents the mask value that is bitwise
ANDed with ToS octet in an IP packet, and the resulting value
is used for range checking of IpTosLow and IpTosHigh. | column | OctetString | .1.3.6.1.4.1.4491.2.1.10.1.5.1.7 |
| docsSubmgt3FilterGrpIpProtocol This attribute represents the value of the IP Protocol
field required for IP packets to match this rule.
The value 256 matches traffic with any IP Protocol value.
The value 257… | column | Unsigned32 | .1.3.6.1.4.1.4491.2.1.10.1.5.1.8 |
| docsSubmgt3FilterGrpInetAddrType The type of the Internet address for InetSrcAddr,
InetSrcMask, InetDestAddr, and InetDestMask. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.4491.2.1.10.1.5.1.9 |