DOCS-QOS-MIB Table View

This table describes the packet classification
configured on the CM or CMTS.
The model is that a packet either received
as input from an interface or transmitted
for output on an interface may be compared
against an ordered list of rules pertaining to
the packet contents. Each rule is a row of this
table. A matching rule provides a service flow
id to to which the packet is classified.
All rules need to match for a packet to match
a classifier.
          
The objects in this row correspond to a set of
Classifier Encoding parameters in a DOCSIS
MAC management message. The docsQosPktClassBitMap
indicates which particular parameters were present
in the classifier as signalled in the DOCSIS message.
If the referenced parameter was not present
in the signalled DOCSIS 1.1 Classifier, the
corresponding object in this row reports a
value as specified in the DESCRIPTION section.

This table describes the set of DOCSIS 1.1 QOS
parameters defined in a managed device.
          
The ifIndex index specifies a DOCSIS MAC Domain.
The docsQosServiceFlowId index specifies a particular
Service Flow.
The docsQosParamSetType index indicates whether
the active, admitted, or provisioned QOS Parameter
Set is being described by the row.
          
Only the QOS Parameter Sets of Docsis 1.1 service
flows are represented in this table.  Docsis 1.0
QOS service profiles are not represented in this
table.
          
Each row corresponds to a DOCSIS QOS Parameter Set
as signaled via DOCSIS MAC management messages.
Each object in the row corresponds to one or
part of one DOCSIS 1.1 Service Flow Encoding.
The docsQosParamSetBitMap object in the row indicates
which particular parameters were signalled in
the original registration or dynamic service
request message that created the QOS Parameter Set.
          
In many cases, even if a QOS Parameter Set parameter
was not signalled, the DOCSIS specification calls
for a default value to be used. That default value
is reported as the value of the corresponding object
in this row.
          
Many objects are not applicable depending on
the service flow direction or upstream scheduling
type.  The object value reported in this case
is specified in the DESCRIPTION clause.

This table describes the set of Docsis-QOS
Service Flows in a managed device.

This table describes statistics associated with the
Service Flows in a managed device.

This table describes statistics associated with
upstream service flows. All counted frames must
be received without an FCS error.

This table describes statistics associated with the
Dynamic Service Flows in a managed device.

This table contains a log of the disconnected
Service Flows in a managed device.

This table describes the set of Docsis-QOS
Service Classes in a CMTS.

This table describes the set of Docsis-QOS
Service Class Policies.
          
This table is an adjunct to the
docsDevFilterPolicy table.  Entries in
docsDevFilterPolicy table can  point to
specific rows in this table.
          
This table permits mapping a packet to a service
class name of an active service flow so long as
a classifier does not exist at a higher
priority.

This table describes set of payload header
suppression entries.

This table provide for referencing the service flows
associated with a particular cable modem. This allows
for indexing into other docsQos tables that are
indexed by docsQosServiceFlowId and ifIndex.