docsQosParamSetTosOrMask

DOCS-QOS-MIB · .1.3.6.1.2.1.10.127.7.1.2.1.22

Object

column OctetString

Specifies the OR mask for IP TOS byte.
See the description of docsQosParamSetTosAndMask
for further details.

Context

MIB: DOCS-QOS-MIB
OID: .1.3.6.1.2.1.10.127.7.1.2.1.22
Type: column
Access: readonly
Status: current
Parent: docsQosParamSetEntry
Table: docsQosParamSetTable
Siblings: 21

Syntax

OctetString

Values & Constraints

Object Constraints

range: 1-1

Related Objects

Sibling Objects

Object	Type	Syntax	OID
docsQosParamSetActiveTimeout Specifies the maximum duration in seconds that resources remain unused on an active service flow before CMTS signals that both active and admitted parameters set are null. The def…	column	seconds Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.10`
docsQosParamSetAdmittedTimeout Specifies the maximum duration in seconds that resources remain in admitted state before resources must be released. The value of 0 signifies an infinite amount of time. …	column	seconds Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.11`
docsQosParamSetMaxConcatBurst Specifies the maximum concatenated burst in bytes which an upstream service flow is allowed. The value is calculated from the FC byte of the Concatenation MAC Header to the last …	column	Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.12`
docsQosParamSetSchedulingType Specifies the upstream scheduling service used for upstream service flow. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Set o…	column	SchedulingType	`.1.3.6.1.2.1.10.127.7.1.2.1.13`
docsQosParamSetNomPollInterval Specifies the nominal interval in microseconds between successive unicast request opportunities on an upstream service flow. This object applies only to upstream se…	column	microseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.127.7.1.2.1.15`
docsQosParamSetTolPollJitter Specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic schedule on an upstream service flow. …	column	microseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.127.7.1.2.1.16`
docsQosParamSetUnsolicitGrantSize Specifies the unsolicited grant size in bytes. The grant size includes the entire MAC frame data PDU from the Frame Control byte to end of the MAC frame. The refere…	column	Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.17`
docsQosParamSetNomGrantInterval Specifies the nominal interval in microseconds between successive data grant opportunities on an upstream service flow. The referenced parameter is applicable only …	column	microseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.127.7.1.2.1.18`
docsQosParamSetTolGrantJitter Specifies the maximum amount of time in microseconds that the transmission opportunities may be delayed from the nominal periodic schedule. The referenced parameter…	column	microseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.127.7.1.2.1.19`
docsQosParamSetGrantsPerInterval Specifies the number of data grants per Nominal Grant Interval (docsQosParamSetNomGrantInterval). The referenced parameter is applicable only for upstream flows wit…	column	Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.20`
docsQosParamSetTosAndMask Specifies the AND mask for IP TOS byte for overwriting IP packets TOS value. The IP packets TOS byte is bitwise ANDed with docsQosParamSetTosAndMask and result is bitwise ORed wi…	column	OctetString	`.1.3.6.1.2.1.10.127.7.1.2.1.21`
docsQosParamSetMaxLatency Specifies the maximum latency between the reception of a packet by the CMTS on its NSI and the forwarding of the packet to the RF interface. A value of 0 signifies no maximum late…	column	microseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.127.7.1.2.1.23`
docsQosParamSetType Defines the type of the QOS parameter set defined by this row. active(1) indicates the Active QOS parameter set, describing the service currently being provided by the Docsis MAC …	column	Enumeration	`.1.3.6.1.2.1.10.127.7.1.2.1.24`
docsQosParamSetRequestPolicyOct Specifies which transmit interval opportunities the CM omits for upstream transmission requests and packet transmissions. This object takes its default value for downstream servic…	column	OctetString	`.1.3.6.1.2.1.10.127.7.1.2.1.25`
docsQosParamSetBitMap This object indicates the set of QOS Parameter Set parameters actually signaled in the DOCSIS registration or dynamic service request message that created or modified the QOS Para…	column	Bits	`.1.3.6.1.2.1.10.127.7.1.2.1.26`
docsQosParamSetServiceClassName Refers to the Service Class Name that the parameter set values were derived. If the referenced parameter is not present in the corresponding DOCSIS QOS Parameter Se…	column	SNMPv2-TCDisplayString	`.1.3.6.1.2.1.10.127.7.1.2.1.4`
docsQosParamSetPriority The relative priority of a service flow. Higher numbers indicate higher priority. This priority should only be used to differentiate service flow with identical parameter sets. …	column	Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.5`
docsQosParamSetMaxTrafficRate Maximum sustained traffic rate allowed for this service flow in bits/sec. Must count all MAC frame data PDU from the bytes following the MAC header HCS to the end of the CRC. The …	column	BitRate	`.1.3.6.1.2.1.10.127.7.1.2.1.6`
docsQosParamSetMaxTrafficBurst Specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. This object is applied i…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.10.127.7.1.2.1.7`
docsQosParamSetMinReservedRate Specifies the guaranteed minimum rate in bits/sec for this parameter set. The value is calculated from the byte following the MAC header HCS to the end of the CRC. The default val…	column	BitRate	`.1.3.6.1.2.1.10.127.7.1.2.1.8`
docsQosParamSetMinReservedPkt Specifies an assumed minimum packet size in bytes for which the docsQosParamSetMinReservedRate will be provided. The value is calculated from the byte following the MAC header HCS…	column	Integer32	`.1.3.6.1.2.1.10.127.7.1.2.1.9`