DKSF-PWR-OLD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
30

npRelayTable

table
.1.3.6.1.4.1.25728.5500.5 · 1 row entry · 7 columns
Open in standard view 
Watchdog and outlet/relay control table
npRelayEntry entry .1.3.6.1.4.1.25728.5500.5.1
Relay/outlet table row
Indexes
npRelayN
Column Syntax OID
npRelayN
The N of output relay
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25728.5500.5.1.1
npRelayMode
Control of relay:
-1 - flip between on(1) and off(0)
0 - manual off
1 - manual on
2 - watchdog
3 - schedule
4 - both schedule and watchdog (while switched on by schedule)
5 - logic
Enumerationr/w
Enumerated Values:
-1flip
0off
1on
2watchdog
3schedule
4scheduleAndWatchdog
5logic
 .1.3.6.1.4.1.25728.5500.5.1.2
npRelayStartReset
Write 1 to start reset (switch relay off for some time)
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.5500.5.1.3
npRelayMemo
Relay memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.5500.5.1.6
npRelayFlip
Write -1 to flip between manual on and manual off states of relay
Enumeration
Enumerated Values:
-1flip
 .1.3.6.1.4.1.25728.5500.5.1.14
npRelayState
Actual relay state at the moment,
regardless of source of control.
0 - relay is off
1 - relay is on
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.5500.5.1.15
npRelayPowered
AC presence on output.
0 - no AC dew to relay switched off or no ac on input
1 - AC is present
Enumeration
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.25728.5500.5.1.16

npPwrTable

table
.1.3.6.1.4.1.25728.5800.3 · 1 row entry · 5 columns
Open in standard view 
Watchdog and outlet/relay control table
npPwrEntry entry .1.3.6.1.4.1.25728.5800.3.1
Watchdog control table row
Indexes
npPwrChannelN
Column Syntax OID
npPwrChannelN
The id of watchdog/power channel
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.5800.3.1.1
npPwrStartReset obsolete
Deprecated in current FW version: Write 1 to start forced reset.
On read:
0 - normal operation
1 - reset is active
2 - reboot pause is active or watchdog is inactive
Integer32
Constraints:
range: 0-2
 .1.3.6.1.4.1.25728.5800.3.1.2
npPwrResetsCounter
Counter of watchdog resets
Write 0 to clear.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25728.5800.3.1.4
npPwrRepeatingResetsCounter
Counter of continous failed
watchdog resets
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.25728.5800.3.1.5
npPwrMemo
Watchdog channel memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.5800.3.1.6

npSmokeTable

table
.1.3.6.1.4.1.25728.8200.1 · 1 row entry · 5 columns
Open in standard view 
Smoke Sensors Table
npSmokeEntry entry .1.3.6.1.4.1.25728.8200.1.1
Smoke Sensors Table Row
Indexes
npSmokeSensorN
Column Syntax OID
npSmokeSensorN
The id of 1Wire Smoke sensor, 1 to 4
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.8200.1.1.1
npSmokeStatus
Status of Smoke sensor
Enumeration
Enumerated Values:
0ok
1alarm
4off
5failed
 .1.3.6.1.4.1.25728.8200.1.1.2
npSmokePower
Controls power on Smoke sensor current loop
Enumerationr/w
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.25728.8200.1.1.3
npSmokeReset
Write 1 to switch off for approx. 10s to reset sensor
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8200.1.1.4
npSmokeMemo
Smoke sensor memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8200.1.1.6

npThermoTable

table
.1.3.6.1.4.1.25728.8800.1 · 1 row entry · 6 columns
Open in standard view 
Thermo Sensors Table
npThermoEntry entry .1.3.6.1.4.1.25728.8800.1.1
Thermo Sensors Table Row
Indexes
npThermoSensorN
Column Syntax OID
npThermoSensorN
The id of temperature sensor, 1 to 8
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.25728.8800.1.1.1
npThermoValue
Temperature, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.2
npThermoStatus
Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
Enumeration
Enumerated Values:
0failed
1low
2norm
3high
 .1.3.6.1.4.1.25728.8800.1.1.3
npThermoLow
Bottom margin of normal temperature range, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.4
npThermoHigh
Top margin of normal temperature range, deg.C
Integer32
Constraints:
range: -60-280
 .1.3.6.1.4.1.25728.8800.1.1.5
npThermoMemo
T channel memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8800.1.1.6

npIoTable

table
.1.3.6.1.4.1.25728.8900.1 · 1 row entry · 7 columns
Open in standard view 
Digital Input/output Table
npIoEntry entry .1.3.6.1.4.1.25728.8900.1.1
Digital Input/output Table Row
Indexes
npIoLineN
Column Syntax OID
npIoLineN
Number of IO line, from 1 to max supported
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.25728.8900.1.1.1
npIoLevelIn
Input level, 0 or 1
Integer32
Constraints:
range: 0-1
 .1.3.6.1.4.1.25728.8900.1.1.2
npIoLevelOut
Output level, 0 or 1
Integer32r/w
Constraints:
range: 0-1
 .1.3.6.1.4.1.25728.8900.1.1.3
npIoMemo
IO line memo
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25728.8900.1.1.6
npIoPulseCounter
Pulse Counter on IO input line (counts positive fronts)
Write 0 to reset.
SNMPv2-SMICounter32r/w
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25728.8900.1.1.9
npIoSinglePulseDuration
Set duration of single pulse on IO output line,
100ms to 25500ms, min. step is 100ms
Integer32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.25728.8900.1.1.12
npIoSinglePulseStart
Write 1 to start single pulse on IO output.
Output will be inverted for time, specified by npIoSinglePulseDuration
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25728.8900.1.1.13