DES7200-INTERFACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
30

myIfTable

table
.1.3.6.1.4.1.171.10.97.2.10.1.1 · 1 row entry · 15 columns
Open in standard view 
list of interface basic configuration objects.
myIfEntry entry .1.3.6.1.4.1.171.10.97.2.10.1.1.1
Entry contains interface basic configurations.
Indexes
myIfIndex
Column Syntax OID
myIfIndex DES7200-TCIfIndex
Textual Convention: DES7200-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.1
myIfPortType
Port type of this port, list as above.
port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS,
and system doesn't distinguish.
port1000MBASEFX indicates that port is port1000MBASEFLX or port1000MBASEFS…
Enumeration
Enumerated Values:
1unknown
2port10M100MBASETX
3port100MBASEFXL
4port100MBASEFXS
5port1000MBASESX
6port1000MBASELX
7port1000MBASETX
8portGBIC
9port100MBASEFX
10port1000MBASEFX
11portSFP
12port10GBASESR
13port10GBASELR
14port10GBASEER
15port10GBASELX4
16port10GBASESW
17port10GBASELW
18port10GBASEEW
19port10GBASE
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.2
myIfFlowControlAdminStatus
Flow control of a port management status.

This attribute apply physical port and aggreate port
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3autonego
4unknown
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.3
myIfFlowControlOperStatus
Oper status: after the negotiation between two ports connetted
the flow contrl status.

This attribute apply physical port and aggreate port
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.4
myIfAdminSpeed
port speed settings.

This attribute apply physical port and aggreate port
Enumerationr/w
Enumerated Values:
1speed10Mb
2speed100Mb
3speed1000Mb
4autonego
5speed10Gb
6unknown
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.5
myIfAdminDuplex
port duplex settings.

This attribute apply physical port and aggreate port
Enumerationr/w
Enumerated Values:
1full
2half
3autonego
4unknown
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.6
myIfOperSpeed
After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).

This attribute apply physical port a…
Enumeration
Enumerated Values:
1speed10Mb
2speed100Mb
3speed1000Mb
4unknown
5speed10Gb
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.7
myIfOperDuplex
After two port have negotiated the duplex status, and this object
is the working duplex status. while the port link status is down ,
then the speed status is unknown(3).

This attribute apply physical por…
Enumeration
Enumerated Values:
1full
2half
3unknown
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.8
myIfManageStatus
Management status of the interface.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.9
myIfIpBroadcast
Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.10
myIfLayer Enumerationr/w
Enumerated Values:
1layer-2
2layer-3
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.11
myIfMode
This value is meaning for only physical port and aggreate port
Enumerationr/w
Enumerated Values:
1access
2trunk
3dot1q-tunnel
4hybrid
5other
6uplink
7host
8promiscuous
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.12
myIfCounterClear
Setting its to any value but 0, will clear counters of this interface.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.13
myIfEntryStatus
Status of this entry, set this object to valid will create a interface,
and set its value to invalid will delete the interface of this entry.
DES7200-TCConfigStatusr/w
Textual Convention: DES7200-TCConfigStatus Enumeration
Type Values:
1valid
2invalid
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.14
myIfMediumType
Port medium type of this port,fiber or copper.
Enumerationr/w
Enumerated Values:
0unknown
1copper
2fiber
 .1.3.6.1.4.1.171.10.97.2.10.1.1.1.15

myIfIpTable

table
.1.3.6.1.4.1.171.10.97.2.10.1.2 · 1 row entry · 5 columns
Open in standard view 
A list of interface ip configuration entries.
myIfIpEntry entry .1.3.6.1.4.1.171.10.97.2.10.1.2.1
An entry containing configuration information applicable
to a Layer3 interface.
Indexes
myIfIpIfIndex myIfIpId myIfIp
Column Syntax OID
myIfIpIfIndex
A unique value, for each Layer3 interface.
DES7200-TCIfIndex
Textual Convention: DES7200-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.2.1.1
myIfIpId
Type of interface ip address.
Enumeration
Enumerated Values:
1primary
2secondary
 .1.3.6.1.4.1.171.10.97.2.10.1.2.1.2
myIfIp
Ip address of the interface myIfIndex refer to.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.97.2.10.1.2.1.3
myIfIpMask
Ip mask of the interface ip address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.97.2.10.1.2.1.4
myIfIpEntryStatus
entry status of this entry. and the means in this enviraments can
reffer to the text-convention definition of the RowStatus.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.97.2.10.1.2.1.5

myIfStatusTable

table
.1.3.6.1.4.1.171.10.97.2.10.1.3 · 1 row entry · 4 columns
Open in standard view 
list of interface status. Status information include some error state and
result of examining to the interface,etc.
myIfStatusEntry entry .1.3.6.1.4.1.171.10.97.2.10.1.3.1
Entry contains interface status information.
Indexes
myIfStatusIndex
Column Syntax OID
myIfStatusIndex DES7200-TCIfIndex
Textual Convention: DES7200-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.3.1.1
myIfStatusLoopBackExamine
Setting its to any value but 0, will Checking whether this port or aggreate can
receive and send packets normally, It indicates that port or aggreate is normal
if opertion is success.
Setting its value to 0 will ca…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.3.1.2
myIfErrorStatus
Port's error status information
Enumeration
Enumerated Values:
1no-error
2err-disable-bpduguard
3err-disable-ptsecurity
 .1.3.6.1.4.1.171.10.97.2.10.1.3.1.3
myIfLineDetect
When reading this object, system detects the quality of line connecting the port.
Detect whether the line is broken or short circuit or not.

The meaning of the obtained value:
Return value=N*10000000+M
N…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.3.1.4

myPortTypeChooseTable

table
.1.3.6.1.4.1.171.10.97.2.10.1.5 · 1 row entry · 2 columns
Open in standard view 
Table of entrance to choose port type.
myPortTypeChooseEntry entry .1.3.6.1.4.1.171.10.97.2.10.1.5.1
Entrance to choose port type.
Indexes
myPortTypeChooseIndex
Column Syntax OID
myPortTypeChooseIndex
The logic port number.
DES7200-TCIfIndex
Textual Convention: DES7200-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.5.1.1
myPortTypeChooseType
The chosen port type. This object is used to choose one of the multiple physical ports of different types,
when the same logical port is correspondent with them.
Apply this attribute to the physical port only.
Enumeration
Enumerated Values:
1fiber
2copper
 .1.3.6.1.4.1.171.10.97.2.10.1.5.1.2

myIfMTUTable

table
.1.3.6.1.4.1.171.10.97.2.10.1.6 · 1 row entry · 2 columns
Open in standard view 
Access table of MTU on interface.
myIfMTUEntry entry .1.3.6.1.4.1.171.10.97.2.10.1.6.1
Interfac MTU access.
Indexes
myIfMTUIndex
Column Syntax OID
myIfMTUIndex
Interface number
DES7200-TCIfIndex
Textual Convention: DES7200-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.6.1.1
myIfMTU
Interface MTU.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.6.1.2

myIfAvailableBWTable

table
.1.3.6.1.4.1.171.10.97.2.10.1.7 · 1 row entry · 2 columns
Open in standard view 
Access table of Available Bandwidth on interface.
myIfAvailableBWEntry entry .1.3.6.1.4.1.171.10.97.2.10.1.7.1
Interfac available bandwidth access.
Indexes
myIfAvailableBWIfIndex
Column Syntax OID
myIfAvailableBWIfIndex
Interface number
DES7200-TCIfIndex
Textual Convention: DES7200-TCIfIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.97.2.10.1.7.1.1
myIfAvailableBWIfBW
Interface available bandwidth(bit).
.1.3.6.1.4.1.171.10.97.2.10.1.7.1.2