myIfAdminSpeed
DES7200-INTERFACE-MIB ·
.1.3.6.1.4.1.171.10.97.2.10.1.1.1.5
Object
column
r/w
Enumeration
port speed settings.
This attribute apply physical port and aggreate port
Context
- MIB
- DES7200-INTERFACE-MIB
- OID
.1.3.6.1.4.1.171.10.97.2.10.1.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- myIfEntry
- Table
- myIfTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | speed10Mb |
2 | speed100Mb |
3 | speed1000Mb |
4 | autonego |
5 | speed10Gb |
6 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| myIfIndex | column | DES7200-TCIfIndex | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.1 |
| myIfIpBroadcast Broadcast address of the interface. if broadcast address not configured on interface, return 0.0.0.0 | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.10 |
| myIfLayer | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.11 |
| myIfMode This value is meaning for only physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.12 |
| myIfCounterClear Setting its to any value but 0, will clear counters of this interface.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.13 |
| myIfEntryStatus Status of this entry, set this object to valid will create a interface,
and set its value to invalid will delete the interface of this entry. | column | DES7200-TCConfigStatus | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.14 |
| myIfMediumType Port medium type of this port,fiber or copper. | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.15 |
| myIfPortType Port type of this port, list as above.
port100MBASEFX indicates that port is port100MBASEFXL or port100MBASEFXS,
and system doesn't distinguish.
port1000MBASEFX indicates that por… | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.2 |
| myIfFlowControlAdminStatus Flow control of a port management status.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.3 |
| myIfFlowControlOperStatus Oper status: after the negotiation between two ports connetted
the flow contrl status.
This attribute apply physical port and aggreate port | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.4 |
| myIfAdminDuplex port duplex settings.
This attribute apply physical port and aggreate port | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.6 |
| myIfOperSpeed After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
… | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.7 |
| myIfOperDuplex After two port have negotiated the duplex status, and this object
is the working duplex status. while the port link status is down ,
then the speed status is unknown(3).
… | column | Enumeration | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.8 |
| myIfManageStatus Management status of the interface. | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.171.10.97.2.10.1.1.1.9 |