DC-RSVP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
133
dcRsvpProductTable
table.1.3.6.1.4.1.629.10.6.1.1
·
1 row entry
·
72 columns
The table of active instances of DC-RSVP. The number of fields in this table is equal to AMB_OID_RSVP_PROD_MAX.
Each entry represents an RSVP entity.
Indexes
dcRsvpProductIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dcRsvpProductIndex
The index of this dcRsvpProductEntry. This is the
HAF entity index passed on the entity create parameters. |
DcRsvpIndex Constraints: range: 128-128Textual Convention: DcRsvpIndex Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.1.1.1 |
||||||||||||||
|
dcRsvpProductASNumber
The number identifying the autonomous system (AS) to which
this node belongs. |
Integer32r/w Constraints: range: 0-65535range: 128-128 |
.1.3.6.1.4.1.629.10.6.1.1.1.2 |
||||||||||||||
|
dcRsvpProductSenderTTL
The TTL set on messages originating at this node. A value
of 0 indicates this number is determined by other means. |
Integer32r/w Constraints: range: 0-255range: 128-128 |
.1.3.6.1.4.1.629.10.6.1.1.1.3 |
||||||||||||||
|
dcRsvpProductMinTimerPeriod
The minimum granularity to allow an internal timer to be
set in the DC-RSVP product code. |
millisecondsSNMPv2-SMIInteger32r/w Constraints: range: 128-128Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.4 |
||||||||||||||
|
dcRsvpProductAPIIfIndex
Management assigned interface identifier for the (internal) LRAPI
interface between RSVP and DC-TPM components. This must be unique in the interface index namespace of the node - it MUST not match any real interface in… |
IF-MIBInterfaceIndexOrZeror/w Textual Convention: IF-MIBInterfaceIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.5 |
||||||||||||||
|
dcRsvpProductAPIAddress
Management assigned IP address used to identify the (internal) LRAPI
interface between RSVP and DC-TPM components. The configured API address MUST not be a real address in the network. It is recommended that this is set… |
OctetStringr/w Constraints: range: 4-32 |
.1.3.6.1.4.1.629.10.6.1.1.1.6 |
||||||||||||||
|
dcRsvpProductAPIRefreshInterval
This field is now deprecated.
|
millisecondsSNMPv2-SMIInteger32r/w Constraints: range: 1-4094Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.7 |
||||||||||||||
|
dcRsvpProductLocalRepairDelay
This object is used to set the delay between detection of a
path error and instigation of local repair procedures. This allows local routing updates to converge. A value of 0 indicates no delay. A value of -1 indicat… |
millisecondsSNMPv2-SMIInteger32r/w Constraints: range: 1-65535Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.8 |
||||||||||||||
|
dcRsvpProductRefreshInterval
This RSVP value, R, which is used to set the average
interval between refresh path and resv messages. Note : If values for the if_refresh_interval and if_refresh_multiple are configured such that the following inequali… |
millisecondsSNMPv2-SMIInteger32r/w Enumerated Values:
Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.9 |
||||||||||||||
|
dcRsvpProductRefreshMultiple
The RSVP value, K, which is the number of unresponded Path
or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have timed out. Note : See note in dcRsvpProductRefres… |
Integer32r/w Constraints: range: 1-214783647range: 0-240 |
.1.3.6.1.4.1.629.10.6.1.1.1.10 |
||||||||||||||
|
dcRsvpProductRfrshSlewDenom
The denominator of the fraction, SlewMax, which is the
maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired … |
Integer32r/w Constraints: range: 1-214783647range: 1-200000000 |
.1.3.6.1.4.1.629.10.6.1.1.1.11 |
||||||||||||||
|
dcRsvpProductRfrshSlewNumerator
The numerator of the fraction, SlewMax, which is the maximum
allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired va… |
Integer32r/w Enumerated Values:
Constraints: range: 1-214783647 |
.1.3.6.1.4.1.629.10.6.1.1.1.12 |
||||||||||||||
|
dcRsvpProductBlockadeMultiple
The RSVP value, Kb, which is the number of refresh timeout
periods after which blockade state is deleted. |
Integer32r/w Constraints: range: 1-214783647 |
.1.3.6.1.4.1.629.10.6.1.1.1.13 |
||||||||||||||
|
dcRsvpProductSocketBufPoolSize
The number of pre-reserved buffers available for sending
sockets data. This is used to pace the sockets data flows. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.14 |
||||||||||||||
|
dcRsvpProductSwitchBufPoolSize
The number of pre-reserved buffers available for programming
the switch. This is used to ensure programming operations do not fail in buffer shortage conditions. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-4096Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.15 |
||||||||||||||
|
dcRsvpProductTeMibBufPoolSize
The number of pre-reserved buffers available for signalling
with the DC-TPM entity supporting the instance of the TE-MIB. This is used to ensure signals are not lost in buffer shortage conditions. |
SNMPv2-SMIInteger32r/w Constraints: range: 1-4094Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.16 |
||||||||||||||
|
dcRsvpProductRoutingBufPoolSize
The number of pre-reserved buffers available for route
queries. This is used to ensure re-routing of many LSPs does not fail in buffer shortage conditions. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.17 |
||||||||||||||
|
dcRsvpProductLSPSetupPriority
The setup priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically more or equal (so lower or equal priority) tha… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.629.10.6.1.1.1.18 |
||||||||||||||
|
dcRsvpProductLSPHoldingPriority
The holding priority to apply to LSPs which are not
signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less or equal (so higher or equal priority) … |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.629.10.6.1.1.1.19 |
||||||||||||||
|
dcRsvpProductAdminStatus
The desired administrative state of the RSVP entity.
|
DcRsvpAdminStatusr/w Textual Convention: DcRsvpAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.20 |
||||||||||||||
|
dcRsvpProductOperStatus
The current operational state of this instance of DC-RSVP.
|
DcRsvpOperStatus Textual Convention: DcRsvpOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.21 |
||||||||||||||
|
dcRsvpProductRowStatus
Used to create and delete a DC-RSVP Product Table entry.
When this object is set to 'active', only the dcRsvpProductAdminStatus object in the row may be modified. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.22 |
||||||||||||||
|
dcRsvpProductLsrIndex
The index of the DC-LMGR product instance which this
DC-RSVP is to join to as its LDB interface provider. If this value is not specified, or the value of this object is 0, DC-RSVP will use the dcRsvpProductIndex value … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.23 |
||||||||||||||
|
dcRsvpProductTeMibIndex
The index of the DC-TPM entity (which supports the TE-MIB) with
which this DC-RSVP entity is to join to as its LRA interface provider. If this value is not specified, or the value of this object is 0, DC-RSVP will use t… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.24 |
||||||||||||||
|
dcRsvpProductMultiStackSupport
A flag to indicate if multiple RSVP stacks are present
in the same system as the current one and, if so, how they are supported. If set to PHOP, Path messages are forwarded to DC-RSVP with the Previous Hop value set as… |
Integer32r/w Constraints: range: 1-3 |
.1.3.6.1.4.1.629.10.6.1.1.1.25 |
||||||||||||||
|
dcRsvpProductUseHopByHop
A flag to indicate that DC-RSVP should use the hop by hop
addressing scheme for PATH and PATH-TEAR messages it sends. If set then the IP addresses used in the IP header of PATH messages forwarded by DC-RSVP set source … |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.26 |
||||||||||||||
|
dcRsvpProductUseNotify
A flag to indicate that DC-RSVP should attempt to insert
a Notify Request object in all Path requests that it sends as ingress and all Resv requests that it sends as egress. The precise behavior is modified by a user ex… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.27 |
||||||||||||||
|
dcRsvpProductNotifyRRDecay
The percentage increase in the rapid retransmission
interval for each consecutive unacknowledged RSVP Notify message. A value of 0 indicates a constant retransmission rate. |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.629.10.6.1.1.1.28 |
||||||||||||||
|
dcRsvpProductNotifyRRInterval
The interval in milliseconds before a Notify message is
first resent if no acknowledgement is received. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.29 |
||||||||||||||
|
dcRsvpProductNotifyRRLimit
The maximum number of times a Notify message is resent if
no acknowledgement is received. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.30 |
||||||||||||||
|
dcRsvpProductAllowIPEncap
A flag to indicate that DC-RSVP should support the use of
IP encapsulation of RSVP packets, which are required for out-of-band signaling. If set, then DC-RSVP will accept incoming RSVP packets that are IP encapsulated,… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.31 |
||||||||||||||
|
dcRsvpProductProtocolExtensions
Specifies which extensions to the standard RSVP-TE protocol
are enabled. For fully standards-compliant behavior, set this parameter to zero (no bits set). To enable specific non-standard protocol extensions, set this … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.32 |
||||||||||||||
|
dcRsvpProductPSRFlags
This field is used by DC-RSVP to determine whether it
should set the Path State Removed flag on a PathErr (and therefore remove corresponding state and generate a PathTear). Each bit of this flags field corresponds to … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.33 |
||||||||||||||
|
dcRsvpProductInitPathRRDecay
The percentage increase in the rapid
retransmission interval for each consecutive unacknowledged RSVP Initial Path message. A value of 0 indicates a constant retransmission rate. A Path message is treate… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.629.10.6.1.1.1.34 |
||||||||||||||
|
dcRsvpProductInitPathRRInterval
The rapid retransmission interval in milliseconds before
an Initial Path message is first resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message w… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.35 |
||||||||||||||
|
dcRsvpProductInitPathRRLimit
The maximum number of times an Initial Path message is
resent if no acknowledgement is received. A Path message is treated as an initial Path if it is the Path message which creates the LSP or a Path refr… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.36 |
||||||||||||||
|
dcRsvpProductEnableUni
A flag to indicate whether the local node supports UNI
signaling messages. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.37 |
||||||||||||||
|
dcRsvpProductRestartCapable
A flag to indicate whether the local node should advertise
itself as restart capable. This should be set to AMB_TRUE if fault-tolerance is enabled in DC-MPLS or if the node supports recovery procedures. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.38 |
||||||||||||||
|
dcRsvpProductRestartTime
The time in milliseconds that the local node takes to
restart RSVP-TE and the communication channel used for RSVP communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.39 |
||||||||||||||
|
dcRsvpProductRecoveryTime
The period of time in milliseconds that the local node
would like neighbors to take to resyncronize RSVP and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.40 |
||||||||||||||
|
dcRsvpProductMinPeerRestart
The mininum period of time in milliseconds that RSVP
should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP will wait for th… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.41 |
||||||||||||||
|
dcRsvpProductGracefulDelTimeout
The time in milliseconds that DC-MPLS will wait for
graceful deletion to complete before the forced deletion procedure is used instead. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.42 |
||||||||||||||
|
dcRsvpProductEgressDelBehavior
Specifies the action that an egress node should take in
the graceful deletion procedure on receipt of a Path message containing an Admin Status object with the D and R bits set. The possible values are: … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.43 |
||||||||||||||
|
dcRsvpProductEnabUniConnSplicing
A flag to indicate whether UNI-N nodes should allow the
splicing of UNI connections with proprietary ON connections. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.44 |
||||||||||||||
|
dcRsvpProductFastRerouteCaps
Specifies what fast reroute capabilities are enabled
on this node. This field is only valid if the fast reroute extension is enabled in the dcRsvpProductProtocolExtensions field above. - PLR: Node provi… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.45 |
||||||||||||||
|
dcRsvpProductFastRroutBkpRtryInt
When this node is a PLR, this field specifies the period
that the node should wait before retrying the setup of a backup LSP which failed last time because no route was available. In the case that a backup LSP is set u… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.46 |
||||||||||||||
|
dcRsvpProductErrorActionFlags
This field is used by DC-RSVP to determine whether it
should take any special action following certain types of local errors. Each bit of this flags field corresponds to an error and a corresponding action. … |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.47 |
||||||||||||||
|
dcRsvpProductEnableNni
A flag to indicate whether the local node supports NNI
signaling messages. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.48 |
||||||||||||||
|
dcRsvpProductBehaviorFlags
Specifies some detailed aspects of the behavior of
DC-RSVP. This field may be changed while _admin_status_ is AMB_ADMIN_STATUS_UP. - enableTTLMatch: Whether to discard received RSVP packets sent with the… |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.1.1.49 |
||||||||||||||
|
dcRsvpProductLabelSetStyle
Specifies the style of LABEL_SET object that should be
used. RFCs 3741 and 3743 are unclear whether the LABEL_SET object should include LABEL headers. The correct interpretation is that the header should not be presen… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.50 |
||||||||||||||
|
dcRsvpProductLabelSetOperStatus
The current operational status of Label Set style.
- excludeLabelHeader: The LABEL_SET object contains concatenated LABEL values without the object headers. - includeLabelHeader: The LABEL_SET object … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.51 |
||||||||||||||
|
dcRsvpProductLabelSetTrapEnable
This object is used to enable traps for the Label
Set style oper_status object. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.52 |
||||||||||||||
|
dcRsvpProductLabelSetChngAct
Specifies the action to take when the value of
dcRsvpProductLabelSetStyle is changed. - leaveLSPs: All nodes should suppress refreshes and switch to the new format while refreshes are suppressed. … |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.53 |
||||||||||||||
|
dcRsvpProductExtPrtAdminStatus
The desired operational state of support for the extended
PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling. Support for end-to-end signalling is a separately licensable component… |
DcRsvpAdminStatusr/w Textual Convention: DcRsvpAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.54 |
||||||||||||||
|
dcRsvpProductUniIncSonetProfile
This field is obsolete. The value in this field is
ignored by DC-RSVP for Test and Set commands. This field is always set to 0 for Get responses. |
Unsigned32r/w Constraints: range: 0-1 |
.1.3.6.1.4.1.629.10.6.1.1.1.55 |
||||||||||||||
|
dcRsvpProductFrrFacAdminStatus
Specifies whether backup LSPs can be put in place for LSPs
requesting FRR using the facility method. Setting this to UP means that LSPs that request FRR using the facility method can have protection at th… |
DcRsvpAdminStatusr/w Textual Convention: DcRsvpAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.56 |
||||||||||||||
|
dcRsvpProductFrrFacOperStatus
The current operational status for FRR Facility support.
When this is UP backup LSPs will be put in place, when this is down backup LSPs will not be put in place and there will be no LSPs that have backup LSPs. |
DcRsvpOperStatus Textual Convention: DcRsvpOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.57 |
||||||||||||||
|
dcRsvpProductIpv6AdminStatus
Specifies whether the local node supports IPv6 LSPs.
Setting this to UP means that this node supports IPv6 LSPs being set up to, from and through this node. Setting this to DOWN means that … |
DcRsvpAdminStatusr/w Textual Convention: DcRsvpAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.58 |
||||||||||||||
|
dcRsvpProductIpv6OperStatus
The current operational status for IPv6 support. When
this is UP IPv6 LSPs can be set up to from or through this node. When this is down there will be no active IPv6 LSPs. |
DcRsvpOperStatus Textual Convention: DcRsvpOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.59 |
||||||||||||||
|
dcRsvpProductAPIIpv6Address
Management assigned IPv6 address used to identify the
(internal) LRAPI interface between RSVP and DC-TPM components. The configured API IPv6 address MUST not be a real address in the network. It is recomm… |
IPV6-TCIpv6Addressr/w Textual Convention: IPV6-TCIpv6Address OctetStringType Constraints: range: 16 |
.1.3.6.1.4.1.629.10.6.1.1.1.60 |
||||||||||||||
|
dcRsvpProductExtPrtOperStatus
The current operational state of support for the extended
PROTECTION object defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling. |
DcRsvpOperStatus Textual Convention: DcRsvpOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.61 |
||||||||||||||
|
dcRsvpProductRROHopType
The type of Recorded Route hop that DC-RSVP will insert on
any messages requesting Recorded Route information. DC-RSVP uses the same hop type on all outgoing messages. If the hop type is changed while LSPs are active, t… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.62 |
||||||||||||||
|
dcRsvpProductBfdIndex
The index of the BFD product instance which this
DC-RSVP is to join to as its BFD interface provider. If the value of this object is 0, DC-RSVP will not attempt to join to a BFD provider. |
DC-MASTER-TCNumericIndexOrZeror/w Textual Convention: DC-MASTER-TCNumericIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.63 |
||||||||||||||
|
dcRsvpProductBfdBufPoolSize
The number of pre-reserved buffers available for BFD
interface messages. This is used to ensure that the establishment of many BFD sessions does not fail in buffer shortage conditions. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.64 |
||||||||||||||
|
dcRsvpProductLspAttrAdminStatus
Specifies whether the local node supports the
LSP_ATTRIBUTES object. Setting this to UP means that this node supports LSPs with the LSP_ATTRIBUTES object being set up to, from and through this node. … |
DcRsvpAdminStatusr/w Textual Convention: DcRsvpAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.65 |
||||||||||||||
|
dcRsvpProductLspAttrOperStatus
The current operational state of support for the
LSP_ATTRIBUTES object. |
DcRsvpOperStatus Textual Convention: DcRsvpOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.66 |
||||||||||||||
|
dcRsvpProductI3Index
The index of the I3 entity with which this DC-RSVP entity
is to join to as its I3 interface provider. If this value is not specified, DC-RSVP will use the dcRsvpProductLsrIndex value, or if this is also not specified, … |
DC-MASTER-TCNumericIndexOrZeror/w Textual Convention: DC-MASTER-TCNumericIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.67 |
||||||||||||||
|
dcRsvpProductSckIndex
The index of the SCK entity with which this DC-RSVP entity
is to join to as its SCK interface provider. If this value is not specified, DC-RSVP will use the dcRsvpProductIndex as the Interface Index when joining on the… |
DC-MASTER-TCNumericIndexOrZeror/w Textual Convention: DC-MASTER-TCNumericIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.68 |
||||||||||||||
|
dcRsvpProductNhrIndex
The index of the NHR entity with which this DC-RSVP entity
is to join to as its NHR interface provider. If this value is not specified, DC-RSVP will use the dcRsvpProductLsrIndex value, or if this is also not specified… |
DC-MASTER-TCNumericIndexOrZeror/w Textual Convention: DC-MASTER-TCNumericIndexOrZero Integer32Type Constraints: range: 0..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.69 |
||||||||||||||
|
dcRsvpProductWaitForHellos
Specifies whether DC-RSVP should suppress sending of Path
messages if gracefully restarting and there is no Hello session up to the next hop. If a Path message is suppressed, DC-RSVP starts the Path refre… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.70 |
||||||||||||||
|
dcRsvpProductForcePEOnEgrDel
Forces DC-RSVP to send a PathErr message upstream when
carrying out forced deletion of an LSP at the egress node. If this field is AMB_TRUE then DC-RSVP will always send a PathErr upstream with the PSR flag set and rele… |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.1.1.71 |
||||||||||||||
|
dcRsvpProductFastRrtBkpSetupInt
When this node is a PLR, this field specifies the maximum
period that the node should wait on initiating the setup of a backup LSP before sending a Resv message upstream for the protected LSP. A value of 0 means that th… |
millisecondsSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.1.1.72 |
dcRsvpDiagnosticTable
table.1.3.6.1.4.1.629.10.6.1.2
·
1 row entry
·
11 columns
The table of sessions that are being diagnosed.
Each entry represents a session that is being diagnosed.
Indexes
dcRsvpDiagProductIndex dcRsvpDiagRequestIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dcRsvpDiagProductIndex
The index of the DC-RSVP product that is handling this query.
|
DcRsvpIndex Textual Convention: DcRsvpIndex Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.2.1.1 |
||||||||||||
|
dcRsvpDiagRequestIndex
The index of this dcRsvpDiagnosticEntry. This corresponds to a
particular session being diagnosed and is an arbitrary value, defined on row creation. |
DcRsvpDiagReqIndex Textual Convention: DcRsvpDiagReqIndex Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.2.1.2 |
||||||||||||
|
dcRsvpDiagReqsInProgress
The number of outstanding diagnostic requests relating to this
session. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.2.1.3 |
||||||||||||
|
dcRsvpDiagSessionEndPoint
The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
session object. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.2.1.4 |
||||||||||||
|
dcRsvpDiagSessionTunnelId
The tunnel ID, from the LSP_TUNNEL_IPv4 session object.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.2.1.5 |
||||||||||||
|
dcRsvpDiagSessionExtTunnelId
The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.2.1.6 |
||||||||||||
|
dcRsvpDiagLastHop
The IP address of the last hop to be queried. This is the address
to which the DREQ message is first sent. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.2.1.7 |
||||||||||||
|
dcRsvpDiagSender
The IP address of the sender for the specified session.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.2.1.8 |
||||||||||||
|
dcRsvpDiagMaxHops
The maximum number of hops to diagnose.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.629.10.6.1.2.1.9 |
||||||||||||
|
dcRsvpDiagHopByHopReply
A flag to indicate that DREPs should be returned hop-by-
hop using the reverse of the path taken by the DREQ. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.2.1.10 |
||||||||||||
|
dcRsvpDiagRowStatus
Used to create or delete a DC-RSVP Diagnostic Table entry.
|
SNMPv2-TCRowStatus Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.2.1.11 |
dcRsvpDiagNodeTable
table.1.3.6.1.4.1.629.10.6.1.3
·
1 row entry
·
35 columns
The table of nodes within a session that is being diagnosed.
External management can extract information
from this table, but cannot modify information in it.
Each entry represents a node within a session that is being diagnosed.
Indexes
dcRsvpDiagNodeProductIndex dcRsvpDiagNodeRequestIndex dcRsvpDiagNodeIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
dcRsvpDiagNodeProductIndex
The index of the DC-RSVP product that is handling this query.
|
DcRsvpIndex Textual Convention: DcRsvpIndex Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.3.1.1 |
||||||||
|
dcRsvpDiagNodeRequestIndex
The index of the corresponding request in dcRsvpDiagnosticTable.
|
DcRsvpDiagReqIndex Textual Convention: DcRsvpDiagReqIndex Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.3.1.2 |
||||||||
|
dcRsvpDiagNodeIndex
The index of this dcRsvpDiagNodeEntry. This is equivalent to the
hop number, with 1 being the ingress. |
DcRsvpDiagNodeIndexType Textual Convention: DcRsvpDiagNodeIndexType Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.3.1.3 |
||||||||
|
dcRsvpDiagNodeType
The type of the node: ingress, transit, egress or missing. Missing
indicates that no diagnostic response has been received for this node, and this entry may in fact represent more than one node. |
DcRsvpDiagNodeTypeVal Textual Convention: DcRsvpDiagNodeTypeVal EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.3.1.4 |
||||||||
|
dcRsvpDiagNodeDreqArrivalTime
The arrival time of the DREQ at the node, specified as a 32-bit
NTP timestamp. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.5 |
||||||||
|
dcRsvpDiagNodeIncomingIfAddr
The IP address of the interface on which message from the sender
are expected to arrive at this node, or 0 if unknown. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.6 |
||||||||
|
dcRsvpDiagNodeOutgoingIfAddr
The IP address of the interface through which the DREQ arrived
and to which messages flow from the given sender for the specified session address, or 0 if unknown. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.7 |
||||||||
|
dcRsvpDiagNodePrevHopAddr
The IP address from which this node receives RSVP PATH messages
for this source, or 0 if unknown. This is also the address to which the DREQ was forwarded. |
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.8 |
||||||||
|
dcRsvpDiagNodeDTTL
The number of IP hops traversed by the DREQ between the downstream
RSVP node and this node. |
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.629.10.6.1.3.1.9 |
||||||||
|
dcRsvpDiagNodeMFlag
A flag that indicates whether the reservation described by the
response objects is merged with reservations from other downstream interfaces before being forwarded upstream. |
SNMPv2-TCTruthValue Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.3.1.10 |
||||||||
|
dcRsvpDiagNodeRErr
The error conditions at this node.
Bit 3 indicates ROUTE object too big; Bit 2 indicates packet too big; Bit 1 indicates no PATH state. Bit 1 is the least significant bit. |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.629.10.6.1.3.1.11 |
||||||||
|
dcRsvpDiagNodeKValue
The refresh timer multiple.
|
Integer32 Constraints: range: 0-15 |
.1.3.6.1.4.1.629.10.6.1.3.1.12 |
||||||||
|
dcRsvpDiagNodeTimerValue
The local refresh timer value in seconds.
|
secondsInteger32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.629.10.6.1.3.1.13 |
||||||||
|
dcRsvpDiagRsvpHopAddr
The hop address from the session's RSVP_HOP object.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.14 |
||||||||
|
dcRsvpDiagRsvpHopLIH
The LIH from the session's RSVP_HOP object.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.15 |
||||||||
|
dcRsvpDiagSenderTpltAddress
The address from the session's SENDER_TEMPLATE object.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.16 |
||||||||
|
dcRsvpDiagSenderTpltLSPId
The LSP ID from the session's SENDER_TEMPLATE object.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.629.10.6.1.3.1.17 |
||||||||
|
dcRsvpDiagFlowSpecCLBktRate
Int-serv controlled load token bucket rate in bytes per second,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.18 |
||||||||
|
dcRsvpDiagFlowSpecCLBktDep
Int-serv controlled load token bucket depth in bytes,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.19 |
||||||||
|
dcRsvpDiagFlowSpecCLPkDataRate
Int-serv controlled load peak data rate in bytes per second,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.20 |
||||||||
|
dcRsvpDiagFlowSpecCLMinPolUnit
Int-serv controlled load minimum policed unit
from the session's RRI_FLOWSPEC object. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.21 |
||||||||
|
dcRsvpDiagFlowSpecCLMaxPktSize
Int-serv controlled load maximum packet size
from the session's RRI_FLOWSPEC object. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.22 |
||||||||
|
dcRsvpDiagFlowSpecGQBktRate
Int-serv guaranteed QoS token bucket rate in bytes per second,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.23 |
||||||||
|
dcRsvpDiagFlowSpecGQBktDep
Int-serv guaranteed QoS token bucket depth in bytes,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.24 |
||||||||
|
dcRsvpDiagFlowSpecGQPkDataRate
Int-serv guaranteed QoS peak data rate in bytes per second,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.25 |
||||||||
|
dcRsvpDiagFlowSpecGQMinPolUnit
Int-serv guaranteed QoS minimum policed unit
from the session's RRI_FLOWSPEC object. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.26 |
||||||||
|
dcRsvpDiagFlowSpecGQMaxPktSize
Int-serv guaranteed QoS maximum packet size
from the session's RRI_FLOWSPEC object. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.27 |
||||||||
|
dcRsvpDiagFlowSpecGQRate
Int-serv guaranteed QoS rate in bytes per second,
from the session's RRI_FLOWSPEC object. This value is rounded to the nearest integer. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.28 |
||||||||
|
dcRsvpDiagFlowSpecGQSlack
Int-serv guaranteed QoS slack in microseconds,
from the session's RRI_FLOWSPEC object. |
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.29 |
||||||||
|
dcRsvpDiagFlowSpecCoSCoS
CoS class of service from the session's RRI_FLOWSPEC object.
|
Integer32 Constraints: range: 0-255 |
.1.3.6.1.4.1.629.10.6.1.3.1.30 |
||||||||
|
dcRsvpDiagFlowSpecCoSMTU
CoS maximum packet size from the session's RRI_FLOWSPEC object.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.629.10.6.1.3.1.31 |
||||||||
|
dcRsvpDiagFilterSpecAddress
The address from the session's FILTER_SPEC object.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.32 |
||||||||
|
dcRsvpDiagFilterSpecLSPId
The LSP ID from the session's FILTER_SPEC object.
|
Integer32 Constraints: range: 0-65535 |
.1.3.6.1.4.1.629.10.6.1.3.1.33 |
||||||||
|
dcRsvpDiagConfirmRcvAddr
The address from the session's CONFIRM object.
|
SNMPv2-SMIIpAddress Textual Convention: SNMPv2-SMIIpAddress OctetStringType Constraints: range: 4 |
.1.3.6.1.4.1.629.10.6.1.3.1.34 |
||||||||
|
dcRsvpDiagStyle
The style word from the session's STYLE object.
|
SNMPv2-SMIUnsigned32 Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.3.1.35 |
dcRsvpIfTable
table.1.3.6.1.4.1.629.10.6.1.4
·
1 row entry
·
15 columns
Each entry in this table represents a RSVP-TE interface parameters entity.
Each entry represents a RSVP-TE interface.
Indexes
dcRsvpIfProductIndex dcRsvpIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
dcRsvpIfProductIndex
Index for the RSVP-TE instance.
|
DcRsvpIndex Textual Convention: DcRsvpIndex Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.4.1.1 |
||||||||||||
|
dcRsvpIfIndex
Network interface index in the IF-MIB (RFC 2233) of the RSVP-TE interface.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.629.10.6.1.4.1.2 |
||||||||||||
|
dcRsvpIfName
The textual name of the interface. The value of this
object is the name of the interface as assigned by the local device and is suitable for use in commands entered at the device's 'console'. This might be a text name… |
SNMPv2-TCDisplayString Textual Convention: SNMPv2-TCDisplayString OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.629.10.6.1.4.1.3 |
||||||||||||
|
dcRsvpIfRowStatus
The row status for this RSVP-TE interface
table entry, used to create and destroy table entries. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.4.1.4 |
||||||||||||
|
dcRsvpIfAdminStatus
Administrative status for this interface. When
dcRsvpIfRowStatus is set to 'active' and dcRsvpIfAdminStatus is 'up' this interface is advertised into DC-MPLS. |
DcRsvpAdminStatusr/w Textual Convention: DcRsvpAdminStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.4.1.5 |
||||||||||||
|
dcRsvpIfOperStatus
Current operational status of the RSVP-TE interface.
|
DcRsvpOperStatus Textual Convention: DcRsvpOperStatus EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.4.1.6 |
||||||||||||
|
dcRsvpIfUseRefrMsgs
Indicates the level of refresh reduction support to be
configured on this interface. |
DcRsvpIfRefreshOptionr/w Textual Convention: DcRsvpIfRefreshOption Unsigned32 |
.1.3.6.1.4.1.629.10.6.1.4.1.7 |
||||||||||||
|
dcRsvpIfUseMessageIDs
Indicates whether Message ID support should be configured
on this interface. Note that Refresh Reduction measures cannot be used if Message ID support is not enabled for that interface. |
SNMPv2-TCTruthValuer/w Textual Convention: SNMPv2-TCTruthValue EnumerationType Values:
|
.1.3.6.1.4.1.629.10.6.1.4.1.8 |
||||||||||||
|
dcRsvpIfRefreshInterval
The average interval, in milliseconds, between Path and
Resv refresh messages for LSPs which use this interface for RSVP-signalled data. A value of 0 indicates that the globally configured value in the RS… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.4.1.9 |
||||||||||||
|
dcRsvpIfHelloPeriod
Default period in milliseconds between sending Hello
messages to all neighbors on this interface. If this is set to 0, no Hello messages are sent by this interface. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.4.1.10 |
||||||||||||
|
dcRsvpIfHelloTolerance
Number of hello periods which may pass without receiving a
successful Hello message from a partner before the Hello session times out. |
SNMPv2-SMIUnsigned32r/w Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.629.10.6.1.4.1.11 |
||||||||||||
|
dcRsvpIfBfdEnabled
Indicates whether Bidirectional Forwarding Detection (BFD) is
enabled on this interface. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.4.1.12 |
||||||||||||
|
dcRsvpIfPhpEnabled
Indicates whether Penultimate Hop Popping (PHP) is
enabled on this interface. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.4.1.13 |
||||||||||||
|
dcRsvpIfExplNullEnabled
Indicates whether Explicit NULL is
enabled on this interface. |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.4.1.14 |
||||||||||||
|
dcRsvpIfAdminGroup
RSVP-TE interface administrative group for this interface.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.629.10.6.1.4.1.15 |