CTRON-SFPS-BASE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
7
Rows
7
Columns
84

sfpsCPResourcesTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1 · 1 row entry · 34 columns
Open in standard view 
This table contains all Call Processors registered with the
CPResources Table and is indexed by the Call Processor id.
sfpsCPResourcesTableEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1
Each entry contains information pertaining to a Call Processor.
Indexes
sfpsCPResourcesTableId
Column Syntax OID
sfpsCPResourcesTableId mandatory
Call Processor id used to index into the table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.1
sfpsCPResourcesTableName mandatory
The name of the associated Call Processor.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.2
sfpsCPResourcesTableOperStatus mandatory
Operational state of entry.
Enumeration
Enumerated Values:
1kStatusRunning
2kStatusHalted
3kStatusPending
4kStatusFaulted
5kStatusNotStarted
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.3
sfpsCPResourcesTableAdminStatus mandatory
This value represents the current administration status of the
associated Call Processor. When enabled(3) the Call Processor
is still allowed to call process packets.

When this value is disabled(2) the ca…
Enumeration
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.4
sfpsCPResourcesTableStateTime mandatory
The last time that this Call Processor has changed states.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.5
sfpsCPResourcesTablePtsIn mandatory
The number of packets that have been sent to this Call
Processor to be handled.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.6
sfpsCPResourcesTablePtsUsed mandatory
The number of packets that have been sent to this Call
Processor and accepted for the purpose of processing.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.7
sfpsCPResourcesTablePolicyFlood mandatory
Number of packets flooded due to Policy.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.8
sfpsCPResourcesResolveFlood mandatory
Number of packets flooded due to not able to Resolve.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.9
sfpsCPResourcesConnectOK mandatory
Number of packets that caused a successful connect.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.10
sfpsCPResourcesDuplicate mandatory
Number of packets that were duplicates of an existing call.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.11
sfpsCPResourcesDiscoverOnly mandatory
Number of packets that the switch only discovered information.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.12
sfpsCPResourcesDiscoverError mandatory
Number of packets that the switch could not discover
information. Something was wrong with the packet.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.13
sfpsCPResourcesResolveFail mandatory
Number of packets which caused the Resolve to fail. The fail
is due to no vlan information was returned.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.14
sfpsCPResourcesResolveError mandatory
Number of packets which caused the Resolve to return an error.
An error could be caused by a bad packet.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.15
sfpsCPResourcesPolicyFail mandatory
Number of packets which caused the Policy to fail. The fail
is caused because the switch has no information on the vlan(s)
returned by Resolve.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.16
sfpsCPResourcesPolicyError mandatory
Number of packets which caused the Policy to return an error.
An error could be caused by a bad packet.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.17
sfpsCPResourcesConnectFail mandatory
Number of packets that caused the Connect to fail.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.18
sfpsCPResourcesConnectFlood mandatory
Number of packets that caused the Connect to flood.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.19
sfpsCPResourcesConnectError mandatory
Number of packets that caused the Connect to return an error.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.20
sfpsCPResourcesConfigTime mandatory
Number of time ticks since the last configuration change.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.21
sfpsCPResourcesNeedFlood mandatory
Set to enabled(1)/disabled(0) if the BaseNeedFlood attribute
is desired. If disabled, then an attempt to resolve is
performed.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.22
sfpsCPResourcesNeedResolve mandatory
Set to enabled(1)/disabled(0) if the Resoolve attribute
is desired.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.23
sfpsCPResourcesNeedDiscover mandatory
Set to enabled(1)/disabled(0) if the Discover attribute
is desired.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.24
sfpsCPResourcesDiscoverAll mandatory
Set to enabled(1)/disabled(0) if the DiscoverAll attribute
is desired.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.25
sfpsCPResourcesNeedProxyOut mandatory
Set to enabled(1)/disabled(0) if the Proxy Forward attribute
is desired.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.26
sfpsCPResourcesNeedProxyIn mandatory
Set to enabled(1)/disabled(0) if the Proxy Back attribute
is desired.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.27
sfpsCPResourcesNeedFilter mandatory
Set to enabled(1)/disabled(0) if the Filter attribute
is desired.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.28
sfpsCPResourcesAcceptRate mandatory
The number of packets per second that have been sent to this
Call Processor to be handled and accepted for processing.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.29
sfpsCPResourcesTotalRate mandatory
The number of packets per second that have been sent to this
Call Processor to be handled.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.30
sfpsCPResourcesSingleFlood mandatory
Number of packets that were unicast (single) flooded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.34
sfpsCPResourcesNeedValidNet mandatory
Number of packets that were unicast (single) flooded.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.35
sfpsCPResourcesInvalidNetDrops mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.36
sfpsCPResourcesPersistMask mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.37

sfpsServiceCenterFacilityTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.2.4.9 · 1 row entry · 8 columns
Open in standard view 
This table gives facility semantics to call processing.
sfpsServiceCenterFacilityEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1
Each entry contains the configuration of the Facility Entry.
Indexes
sfpsServiceCenterFacilityHashLeaf
Column Syntax OID
sfpsServiceCenterFacilityHashLeaf mandatory
Server hash, part of instance key.
HexInteger
Textual Convention: HexInteger Integer32
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.1
sfpsServiceCenterFacilityMetric mandatory
Defines order servers are called low to high.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.2
sfpsServiceCenterFacilityName mandatory
Server name.
RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.3
sfpsServiceCenterFacilityOperStatus mandatory
Operational state of entry.
Enumeration
Enumerated Values:
1kStatusRunning
2kStatusHalted
3kStatusPending
4kStatusFaulted
5kStatusNotStarted
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.4
sfpsServiceCenterFacilityAdminStatus mandatory
Administrative State of Entry.
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.5
sfpsServiceCenterFacilityStatusTime mandatory
Time Tick of last operStatus change.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.6
sfpsServiceCenterFacilityRequests mandatory
Requests made to server.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.7
sfpsServiceCenterFacilityReply mandatory
GOOD replies by server.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.4.9.1.8

sfpsCSPControlTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.2.5.1 · 1 row entry · 7 columns
Open in standard view 
Cabletron Switch Protocol Control statistics
sfpsCSPControlTableEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1
Indexes
sfpsCSPControlTableIndex
Column Syntax OID
sfpsCSPControlTableIndex mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.1
sfpsCSPControlTableCSPType mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.2
sfpsCSPControlTableCSPName mandatory RFC1213-MIBDisplayString
Textual Convention: RFC1213-MIBDisplayString OctetString
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.3
sfpsCSPControlTableAdminStatus mandatory Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.4
sfpsCSPControlTableSwitchToCallProc mandatory Enumeration
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.5
sfpsCSPControlTablePktsProcessed mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.6
sfpsCSPControlTablePktRate mandatory Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.2.5.1.1.7

sfpsBlockSourceTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.14.1.1 · 1 row entry · 11 columns
Open in standard view 
The SourceBlocker table lists all nodes (MAC addresses) that
have been heard locally on the switch. Only a certain subset
(if any) of the nodes in this table are blocked.
sfpsBlockSourceEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1
Entry in the SourceBlocker table indexed by a counter.
Indexes
sfpsBlockSourceIndex
Column Syntax OID
sfpsBlockSourceIndex mandatory
The index into the table
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.1
sfpsBlockSourceMAC mandatory
The MAC address of the node.
SfpsAddress
Textual Convention: SfpsAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.2
sfpsBlockSourceElapTimeShort mandatory
The elapsed time (seconds) in the current short-threshold
period.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.3
sfpsBlockSourceNumCallsShort mandatory
The number of packets seen from the node during the elapsed
time for the short-threshold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.4
sfpsBlockSourceElapTimeLong mandatory
The elapsed time (seconds) in the current long-threshold
period.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.5
sfpsBlockSourceNumCallLong mandatory
The number of packets seen from the node during the elapsed
time for the long-threshold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.6
sfpsBlockSourceBlockFlag mandatory
Describes whether the node is blocked or not. There are three
possible integer values for this field: 0-notBlocked,
1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used
to represent a node that would be in the …
Enumeration
Enumerated Values:
1blocked
2wouldBeBlocked
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.7
sfpsBlockSourceUnBlockableFlag mandatory
Flags a node as either Blockable(0) or Unblockable(1). When a
node is unblockable, it will never be blocked regardless of the
number of packets it sends. The default setting is blockable.
Any node can be changed to unbl…
Enumeration
Enumerated Values:
1unblockable
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.8
sfpsBlockSourceFilterPresent mandatory
Flags whether or not a connection filter is in place for the
given node. (This attribute cannot be changed on its own and is
therefore used only for diagnostic purposes. It is used
internally so that only one filter con…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.9
sfpsBlockSourceNext mandatory
If this node entry (instance) is part of a hash chain, the
NEXT leaf will contain the index to the next node entry in
the chain. Otherwise, it will contain -1.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.10
sfpsBlockSourceBlocksOnlyIndex mandatory
Contains the index into the BlockSourceOnly table or the
UnblockableOnly table depending on the entry flags. If the
'blocked flag' is set, this value represents the index into
the BlockSourceOnly table. If the 'unblocka…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.1.1.1.11

sfpsBlockSourceOnlyTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.14.2.1 · 1 row entry · 11 columns
Open in standard view 
The format of the BlockSourceOnly Table is exactly the same as the
SourceBlocker Table. The only difference is that the entries in
this table are only a subset of the entries in the SourceBlocker
Table. Only the entries that have a BLOCKFLAG set to 'blocked' or
'would-be-blocked' will reside in this table.
sfpsBlockSourceOnlyEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1
Entry in the BlockSourceOnly table indexed by a counter.
Indexes
sfpsBlockSourceOnlyIndex
Column Syntax OID
sfpsBlockSourceOnlyIndex mandatory
The index into the table
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.1
sfpsBlockSourceOnlyMAC mandatory
The MAC address of the node.
SfpsAddress
Textual Convention: SfpsAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.2
sfpsBlockSourceOnlyElapTimeShort mandatory
The elapsed time (seconds) in the current short-threshold
period.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.3
sfpsBlockSourceOnlyNumCallsShort mandatory
The number of packets seen from the node during the elapsed
time for the short-threshold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.4
sfpsBlockSourceOnlyElapTimeLong mandatory
The elapsed time (seconds) in the current long-threshold
period.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.5
sfpsBlockSourceOnlyNumCallLong mandatory
The number of packets seen from the node during the elapsed
time for the long-threshold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.6
sfpsBlockSourceOnlyBlockFlag mandatory
Describes whether the node is blocked or not. There are three
possible integer values for this field: 0-notBlocked,
1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used
to represent a node that would be in the …
Enumeration
Enumerated Values:
1blocked
2wouldBeBlocked
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.7
sfpsBlockSourceOnlyUnBlockableFlag mandatory
Flags a node as either Blockable(0) or Unblockable(1). When a
node is unblockable, it will never be blocked regardless of the
number of packets it sends. The default setting is blockable.
Any node can be changed to unbl…
Enumeration
Enumerated Values:
1unblockable
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.8
sfpsBlockSourceOnlyFilterPresent mandatory
Flags whether or not a connection filter is in place for the
given node. (This attribute cannot be changed on its own and is
therefore used only for diagnostic purposes. It is used
internally so that only one filter con…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.9
sfpsBlockSourceOnlyNext mandatory
If this node entry (instance) is part of a hash chain, the
NEXT leaf will contain the index to the next node entry in
the chain. Otherwise, it will contain -1.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.10
sfpsBlockSourceOnlyBlocksOnlyIndex mandatory
Contains the index into the BlockSourceOnly table or the
UnblockableOnly table depending on the entry flags. If the
'blocked' flag is set, this value represents the index into
the BlockSourceOnly table. If the 'unblocka…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.2.1.1.11

sfpsBlockSourcePortTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.14.3.1 · 1 row entry · 2 columns
Open in standard view 
The SourceBlock API allows for administratively selecting a port and
flagging it as 'unblockable'. The BlockSourcePort table shows which
ports are set to 'unblockable' and which ones remain set to the default
'blockable' setting.
sfpsBlockSourcePortEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1
Entry into the BlockSourcePort Table
Indexes
sfpsBlockSourcePortPort
Column Syntax OID
sfpsBlockSourcePortPort mandatory
This is the instance part of the table. There will be as many
instances as there are logical ports in the device. The attributes
represented in subsequent leaves all pertain to this port instance.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.1
sfpsBlockSourcePortBlockability mandatory
This leaf contains either 0-blockable or 1-unblockable, depending on
whether nodes on this port are allowed to be blocked or not.
Enumeration
Enumerated Values:
1unblockable
 .1.3.6.1.4.1.52.4.2.4.2.2.14.3.1.1.2

sfpsBlockSourceExcludeTable

table mandatory
.1.3.6.1.4.1.52.4.2.4.2.2.14.5.1 · 1 row entry · 11 columns
Open in standard view 
The format of the UnblockableOnly Table is exactly the same as the
SourceBlocker Table. The only difference is that the entries in this
table are only a subset of the entries in the SourceBlocker Table. 
Only the entries that have an UNBLOCKABLEFLAG set to 'unblockable'
will show up in this table.
sfpsBlockSourceExcludeEntry entry .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1
Entry in the BlockSourceOnly table indexed by a counter.
Indexes
sfpsBlockSourceExcludeIndex
Column Syntax OID
sfpsBlockSourceExcludeIndex mandatory
The index into the table
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.1
sfpsBlockSourceExcludeMAC mandatory
The MAC address of the node.
SfpsAddress
Textual Convention: SfpsAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.2
sfpsBlockSourceExcludeElapTimeShort mandatory
The elapsed time (seconds) in the current short-threshold
period.
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.3
sfpsBlockSourceExcludeNumCallsShort mandatory
The number of packets seen from the node during the elapsed
time for the short-threshold
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.4
sfpsBlockSourceExcludeElapTimeLong mandatory
The elapsed time (seconds) in the current long-threshold
period
RFC1155-SMITimeTicks
Textual Convention: RFC1155-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.5
sfpsBlockSourceExcludeNumCallLong mandatory
The number of packets seen from the node during the elapsed
time for the long-threshold.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.6
sfpsBlockSourceExcludeBlockFlag mandatory
Describes whether the node is blocked or not. There are three
possible integer values for this field: 0-notBlocked,
1-Blocked, 2-WouldBeBlocked. The WouldBeBlocked value is used
to represent a node that would be in the …
Enumeration
Enumerated Values:
1blocked
2wouldBeBlocked
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.7
sfpsBlockSourceExcludeUnBlockableFlag mandatory
Flags a node as either Blockable(0) or Unblockable(1). When a
node is unblockable, it will never be blocked regardless of the
number of packets it sends. The default setting is blockable.
Any node can be changed to unbl…
Enumeration
Enumerated Values:
1unblockable
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.8
sfpsBlockSourceExcludeFilterPresent mandatory
Flags whether or not a connection filter is in place for the
given node. (This attribute cannot be changed on its own and is
therefore used only for diagnostic purposes. It is used
internally so that only one filter con…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.9
sfpsBlockSourceExcludeNext mandatory
If this node entry (instance) is part of a hash chain, the
NEXT leaf will contain the index to the next node entry in
the chain. Otherwise, it will contain -1
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.10
sfpsBlockSourceExcludeBlockSourceOnlyIndex mandatory
Contains the index into the BlockSourceOnly table or the
UnblockableOnly table depending on the entry flags. If the
'blocked' flag is set, this value represents the index into
the BlockSourceOnly table. If the 'unblocka…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.52.4.2.4.2.2.14.5.1.1.11