sfpsCPResourcesConfigTime

CTRON-SFPS-BASE-MIB · .1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.21
MIB view Table view

Object

column mandatory RFC1155-SMITimeTicks 
Number of time ticks since the last configuration change.

Context

MIB
CTRON-SFPS-BASE-MIB
OID
.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.21
Type
column
Access
readonly
Status
mandatory
Parent
sfpsCPResourcesTableEntry
Table
sfpsCPResourcesTable
Siblings
33

Syntax

RFC1155-SMITimeTicks
Source
RFC1155-SMITimeTicks
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sfpsCPResourcesTableId mandatory
Call Processor id used to index into the table.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.1
sfpsCPResourcesConnectOK mandatory
Number of packets that caused a successful connect.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.10
sfpsCPResourcesDuplicate mandatory
Number of packets that were duplicates of an existing call.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.11
sfpsCPResourcesDiscoverOnly mandatory
Number of packets that the switch only discovered information.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.12
sfpsCPResourcesDiscoverError mandatory
Number of packets that the switch could not discover information. Something was wrong with the packet.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.13
sfpsCPResourcesResolveFail mandatory
Number of packets which caused the Resolve to fail. The fail is due to no vlan information was returned.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.14
sfpsCPResourcesResolveError mandatory
Number of packets which caused the Resolve to return an error. An error could be caused by a bad packet.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.15
sfpsCPResourcesPolicyFail mandatory
Number of packets which caused the Policy to fail. The fail is caused because the switch has no information on the vlan(s) returned by Resolve.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.16
sfpsCPResourcesPolicyError mandatory
Number of packets which caused the Policy to return an error. An error could be caused by a bad packet.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.17
sfpsCPResourcesConnectFail mandatory
Number of packets that caused the Connect to fail.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.18
sfpsCPResourcesConnectFlood mandatory
Number of packets that caused the Connect to flood.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.19
sfpsCPResourcesTableName mandatory
The name of the associated Call Processor.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.2
sfpsCPResourcesConnectError mandatory
Number of packets that caused the Connect to return an error.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.20
sfpsCPResourcesNeedFlood mandatory
Set to enabled(1)/disabled(0) if the BaseNeedFlood attribute is desired. If disabled, then an attempt to resolve is performed.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.22
sfpsCPResourcesNeedResolve mandatory
Set to enabled(1)/disabled(0) if the Resoolve attribute is desired.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.23
sfpsCPResourcesNeedDiscover mandatory
Set to enabled(1)/disabled(0) if the Discover attribute is desired.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.24
sfpsCPResourcesDiscoverAll mandatory
Set to enabled(1)/disabled(0) if the DiscoverAll attribute is desired.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.25
sfpsCPResourcesNeedProxyOut mandatory
Set to enabled(1)/disabled(0) if the Proxy Forward attribute is desired.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.26
sfpsCPResourcesNeedProxyIn mandatory
Set to enabled(1)/disabled(0) if the Proxy Back attribute is desired.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.27
sfpsCPResourcesNeedFilter mandatory
Set to enabled(1)/disabled(0) if the Filter attribute is desired.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.28
sfpsCPResourcesAcceptRate mandatory
The number of packets per second that have been sent to this Call Processor to be handled and accepted for processing.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.29
sfpsCPResourcesTableOperStatus mandatory
Operational state of entry.
columnEnumeration.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.3
sfpsCPResourcesTotalRate mandatory
The number of packets per second that have been sent to this Call Processor to be handled.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.30
sfpsCPResourcesSingleFlood mandatory
Number of packets that were unicast (single) flooded.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.34
sfpsCPResourcesNeedValidNet mandatory
Number of packets that were unicast (single) flooded.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.35
sfpsCPResourcesInvalidNetDrops mandatorycolumnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.36
sfpsCPResourcesPersistMask mandatorycolumnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.37
sfpsCPResourcesTableAdminStatus mandatory
This value represents the current administration status of the associated Call Processor. When enabled(3) the Call Processor is still allowed to call process packets. …
columnEnumeration.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.4
sfpsCPResourcesTableStateTime mandatory
The last time that this Call Processor has changed states.
columnRFC1155-SMITimeTicks.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.5
sfpsCPResourcesTablePtsIn mandatory
The number of packets that have been sent to this Call Processor to be handled.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.6
sfpsCPResourcesTablePtsUsed mandatory
The number of packets that have been sent to this Call Processor and accepted for the purpose of processing.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.7
sfpsCPResourcesTablePolicyFlood mandatory
Number of packets flooded due to Policy.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.8
sfpsCPResourcesResolveFlood mandatory
Number of packets flooded due to not able to Resolve.
columnInteger32.1.3.6.1.4.1.52.4.2.4.2.2.2.3.1.1.9