CTRON-SFCS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

358

sfcsConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1 · 1 row entry · 20 columns

Open in standard view

This table contains the configuration and administrative
information for each SFCS module.  Essentially, a
separate SFCS instance exists for each switch module.
If SFCS is not configured on a module, than an entry
will not exist.

sfcsConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1

Each entry specifies the SFCS configuration for the
SFCS module.

Indexes

sfcsConfigSlotIndex

Column Syntax OID

sfcsConfigSlotIndex mandatory

The primary index to the SFCS switch table. This
identifies the chassis slot number for this switch
module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.1

sfcsConfigAdminStatus mandatory

Sets the administrative state of the SFCS switching
services for this SFCS module. This controls the
SFCS state at a module level. Regardless of the
per-interface state of each SFCS switching interface
and the state o…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.2

sfcsConfigAdminReset mandatory

Resets this SFCS module. Writing a value of
reset(2) will force a soft restart of the SFCS
without any graceful shutdown. Any active
connections or services will be interrupted.
other(1) -- none of the fo…

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.3

sfcsConfigOperStatus mandatory

Indicates the current operating condition of the SFCS
module.
enabled(1) -- running
disabled(2) -- not running
other(3) -- none of the following
pending-disa…

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	other
4	pending-disable
5	pending-enable
6	invalid-config

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.4

sfcsConfigOperTime mandatory

Indicates the amount of time (# of time ticks) that this
SFCS module has been in its current operational state.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.5

sfcsConfigLastChange mandatory

Indicates the last time a change was made to the
configuration entry for this SFCS switch module.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.6

sfcsConfigVersion mandatory

Indicates the current revision level of the SFCS MIB
for this switch module expressed as an integer.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.7

sfcsConfigMibRev mandatory

Indicates in textual format the current revision level
of the Cabletron SFCS MIB for this switch module.

RFC1213-MIBDisplayString

Textual Convention: RFC1213-MIBDisplayString OctetString

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.8

sfcsConfigSwitchHostPort mandatory

Indicates the switch port that is attached to the host.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.9

sfcsConfigHostCtrlATMAddr mandatory

Indicates the ATM address of the host. (SAR)

OctetString

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.10

sfcsConfigSwitchCapacity mandatory

Indicates the front panel bandwidth based on the hardware
that is currently installed, in Mbps.
(number of ports and the port type)

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11

sfcsConfigMaxCnxEntries mandatory

Indicates the maximum number of connections which
can be established on this switch module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.12

sfcsConfigMaxStatEntries mandatory

Indicates the maximum number of stats enabled VCs for this
switch module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.13

sfcsConfigMaxUpcEntries mandatory

Indicates the maximum number of UPC enabled VCs for this
switch module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.14

sfcsConfigNumberANIMS mandatory

Indicates the number of ATM Network Inteface Modules
currently configured on this switch module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.15

sfcsConfigBwCapability mandatory

Indicates the total bandwidth capability for this
switch engine expressed in Mbps.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.16

sfcsConfigMasterClock1Source mandatory

Indicates the clocking source for MasterClock1 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking.

Enumerationr/w

Enumerated Values:

1	anim-one-clk
2	anim-two-clk
3	anim-three-clk
4	anim-four-clk
5	backplane-one
6	backplane-two

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.17

sfcsConfigMasterClock2Source mandatory

Indicates the clocking source for MasterClock2 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking.

Enumerationr/w

Enumerated Values:

1	anim-one-clk
2	anim-two-clk
3	anim-three-clk
4	anim-four-clk
5	backplane-one
6	backplane-two

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.18

sfcsConfigMasterClock1Standby mandatory

Indicates the clocking stand-by for MasterClock1 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking. If this…

Enumerationr/w

Enumerated Values:

1	anim-one-clk
2	anim-two-clk
3	anim-three-clk
4	anim-four-clk
5	backplane-one
6	backplane-two
7	none

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.19

sfcsConfigMasterClock2Standby mandatory

Indicates the clocking stand-by for MasterClock2 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does not support
backplane clocking. If this…

Enumerationr/w

Enumerated Values:

1	anim-one-clk
2	anim-two-clk
3	anim-three-clk
4	anim-four-clk
5	backplane-one
6	backplane-two
7	none

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.20

sfcsStatusTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1 · 1 row entry · 7 columns

Open in standard view

This table contains the status information for each SFCS
switch module.

sfcsStatusEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1

Each entry contains the SFCS statistics for the SFCS
instance.

Indexes

sfcsStatusSlotIndex

Column	Syntax	OID
sfcsStatusSlotIndex mandatory The primary index to the SFCS switch table. This identifies the chassis slot number for this SFCS module.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.1`
sfcsStatusTdmCellCount mandatory Indicates the total number of cells being transfered across the TDM for this switch module.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.2`
sfcsStatusTdmUtilization mandatory Indicates the percentage TDM utilization for this switch module.	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.3`
sfcsStatusCurrCnxEntries mandatory Indicates the current number of connection entries for this switch module.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.4`
sfcsStatusCurrUPCEntries mandatory Indicates the current number of UPC entries for this switch module.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.5`
sfcsStatusCurrStatsEntries mandatory Indicates the current number of statistics entries for this switch module.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.6`
sfcsStatusCurrCtmAgent mandatory Indicates the current board number of the ctm agent for this switch module.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.2.2.1.1.7`

sfcsUPCTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1 · 1 row entry · 5 columns

Open in standard view

This table contains the Usage Parameter Control info
for this SFCS module.

sfcsUPCEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1

Each entry contains the UPC data for the SFCS instance.

Indexes

sfcsUPCSlotIndex

Column Syntax OID

sfcsUPCSlotIndex mandatory

The primary index to the SFCS switch table. This
identifies the slot number for this SFCS module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.1

sfcsUPCAdminStatus mandatory

Sets the administrative state of the SFCS module's
UPC engine.
enabled(1)
disabled(2)
other(3)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.2

sfcsUPCOperStatus mandatory

Indicates the operational state of the SFCS module's
UPC engine.

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.3

sfcsUPCReset mandatory

Resets the UPC engine for this SFCS module.
other(1)
reset(2)

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.4

sfcsUPCOperTime mandatory

Indicates the amount of time (# of time ticks) that
the UPC engine has been active for this switch module.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.3.1.1.5

sfcsStatsEngineTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1 · 1 row entry · 5 columns

Open in standard view

This table contains information for the Statistics engine
for a particular switch module.

sfcsStatsEngineEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1

Each entry contains the statistics engine data for the
SFCS module.

Indexes

sfcsStatsEngineSlotIndex

Column Syntax OID

sfcsStatsEngineSlotIndex mandatory

The primary index to the SFCS stats engine table.
This identifies the chassis slot number for this SFCS
module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.1

sfcsStatsEngineAdminStatus mandatory

Sets the administrative state of the SFCS switch
statistics engine. Writing a value of enabled(1) causes
these counters to become active for this SFCS switch
instance. Writing a value of disabled(2) causes
these count…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.2

sfcsStatsEngineOperStatus mandatory

Indicates the operational state of the SFCS switch
statistics engine for this switch module.
enabled(1)
disabled(2)
other(3)

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.3

sfcsStatsEngineReset mandatory

Resets the SFCS switch counters for this SFCS module.
Writing a value of reset(2) resets the SFCS switch
counters to 0 and causes sfcsStatsEngineOperTime
to also be reset to 0.
other(1)
reset(2)

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.4

sfcsStatsEngineOperTime mandatory

Indicates the amount of time (# of time ticks) that
the SFCS switch statistics have been active for this
switch module.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.4.1.1.5

sfcsPacketDiscardEngineTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1 · 1 row entry · 6 columns

Open in standard view

This table contains information for the Packet Discard engine
for a particular switch module.

sfcsPacketDiscardEngineEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1

Each entry contains the packet discard engine data for the
SFCS module.

Indexes

sfcsPacketDiscardEngineSlotIndex

Column Syntax OID

sfcsPacketDiscardEngineSlotIndex mandatory

The primary index to the SFCS packet discard engine table.
This identifies the chassis slot number for this SFCS
module.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.1

sfcsPacketDiscardEngineAdminStatus mandatory

Sets the administrative state of the SFCS switch
packet discard engine. Writing a value of enabled(1) causes
these packet discard registers to become active for this SFCS switch
instance. Writing a value of disabled(2…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.2

sfcsPacketDiscardEngineOperStatus mandatory

Indicates the operational state of the SFCS switch
packet discard engine for this switch module.
enabled(1)
disabled(2)
other(3)

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.3

sfcsPacketDiscardEngineReset mandatory

Resets the SFCS switch registers for this SFCS module.
Writing a value of reset(2) resets the SFCS switch packet
discard registers to 0 and causes sfcsPacketDiscardEngineOperTime
to also be reset to 0.
other(…

Enumerationr/w

Enumerated Values:

1	other
2	reset

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.4

sfcsPacketDiscardEngineEPDPercentage mandatory

Sets the Early Packet Discard threshold percentage for every
port, and every priority on a single blade.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.5

sfcsPacketDiscardEngineOperTime mandatory

Indicates the amount of time (# of time ticks) that
the SFCS switch packet discard engine has been active for this
switch module.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.1.2.11.1.1.2.5.1.1.6

sfcsANIMConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1 · 1 row entry · 8 columns

Open in standard view

This table contains the configuration information for
each SFCS ANIM instance.

sfcsANIMConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1

Each entry contains the SFCS config info for the SFCS
instance.

Indexes

sfcsANIMConfigANIMIndex

Column Syntax OID

sfcsANIMConfigANIMIndex mandatory

This index specifies which ANIM we are dealing
with. This reference is in the same format as
MIB II's InterfaceIndex.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.1

sfcsANIMConfigAdminStatus mandatory

Sets the administrative state of the SFCS switch
ANIM.
enabled(1)
disabled(2)
other(3)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.2

sfcsANIMConfigOperStatus mandatory

Indicates the operational state of the SFCS switch
ANIM for this SFCS ANIM instance.
enabled(1)
disabled(2)
other(3)

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.3

sfcsANIMConfigANIMType mandatory

Indicates the type of physical interface for this
ANIM. The types are described in ctron.oids

ObjectIdentifier

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.4

sfcsANIMConfigNumInterfaces mandatory

Indicates the number of operational interfaces for
this ANIM.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.5

sfcsANIMConfigLineRate mandatory

Indicates the line rate per port for this ANIM in
Mbps.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.6

sfcsANIMConfigToMB mandatory

This is the ANIM clock source to board.

Enumerationr/w

Enumerated Values:

1	local-anim-clock
2	port-one-clock
3	port-two-clock
4	port-three-clock
5	port-four-clock

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.7

sfcsANIMConfigMBClockSelect mandatory

This indicates the ANIM clock source.

Enumerationr/w

Enumerated Values:

1	master-clk-one
2	master-clk-two

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.1.1.1.8

sfcsANIMStatsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1 · 1 row entry · 3 columns

Open in standard view

This table contains the statistics information for
each SFCS ANIM instance.

sfcsANIMStatsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1

Each entry contains the SFCS statistics for the SFCS
instance.

Indexes

sfcsANIMStatsANIMIndex

Column	Syntax	OID
sfcsANIMStatsANIMIndex mandatory The primary index which specifies which ANIM instance we are dealing with. This index is formatted like MIB II's Interface Index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.1`
sfcsANIMStatsRxCells mandatory Indicates the number of cells received from this ANIM's interfaces.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.2`
sfcsANIMStatsTxCells mandatory Indicates the number of cells transmitted from this ANIM's interfaces.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.3.2.1.1.3`

sfcsANIMPicTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1 · 1 row entry · 30 columns

Open in standard view

This table contains the PIC information for
each SFCS ANIM instance.

sfcsANIMPicEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1

Each entry contains the SFCS PIC info for the SFCS
instance.

Indexes

sfcsANIMPicIndex

Column Syntax OID

sfcsANIMPicSlot mandatory

Specific slot which the module that realizes this PIC
resides. If the PIC is associated with the chassis
and not a specific module then this value will be 0.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.1

sfcsANIMPicIndex mandatory

Uniquely identifies the instance of a PIC in a particular
slot.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.2

sfcsANIMPicLocation mandatory

Defines location of the PIC chip. This takes on any of
the encoding values defined below for backplane, module,
daughter board, brim.

ObjectIdentifier

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.3

sfcsANIMPicStatus mandatory

Provides the status of the specific PIC chip. the values
are defined as follows:
other(1) - firmware can not determine status
present(2) - PIC seems to be functional
notPresent(3) - PIC not foun…

Enumeration

Enumerated Values:

1	other
2	present
3	notPresent
4	checkSum
5	error
6	limited

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.4

sfcsANIMPicVersion mandatory

Reflects the version of the PIC implementation that this
PIC conforms to. This has the format x.yy . If non-existent,
this object will be set to all blanks(ascii 32).

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.5

sfcsANIMPicModuleType mandatory

Defines the standard module type value as defined in
ctron-oids.

ObjectIdentifier

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.6

sfcsANIMPicMfgPN mandatory

Describes the manufacturing level part number of the module
associated with this PIC. This information is encoded as
follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of…

OctetString

Constraints:
range: 9-9

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.7

sfcsANIMPicMfgSN mandatory

Describes the manufacturing level serial number of the module
associated with this PIC. This information is encoded as
follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - …

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.8

sfcsANIMPicMfgPartNumb mandatory

This object presents the part number portion of the
ctPicMfgPN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32…

OctetString

Constraints:
range: 7-7

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.9

sfcsANIMPicMfgSerialNumb mandatory

This object presents the serial number portion of the
ctPicMfgSN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii …

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.10

sfcsANIMPicMfgReworkLocation mandatory

The 2 character code that defines the location this
module was last reworked. This object contains the same
information as presented in ctPicMfgPN object however
in a more human readable format. If non-existent, this
o…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.11

sfcsANIMPicMfgMfgLocation mandatory

The two character code that defines the location
this module was manufactured at. This object contains the same
information as presented in ctPicMfgSN object however
in a more human readable format. If non-existent, th…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.12

sfcsANIMPicMfgDateCode mandatory

The 3 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicMfgSN
object however in a more human readable format. If
non-e…

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.13

sfcsANIMPicMfgRevisionCode mandatory

The 3 character board level revision code field of this
module. This object contains the same information as
presented in ctPicMfgSN object however in a more human
readable format. If non-existent, this object will be…

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.14

sfcsANIMPicTLPN mandatory

Describes the top level part number of the module associated
with this PIC. This information is encoded as follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this obje…

OctetString

Constraints:
range: 9-9

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.15

sfcsANIMPicTLSN mandatory

Describes the top level serial number of the module
associated with this PIC. This information is encoded
as follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufactur…

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.16

sfcsANIMPicTLPartNumb mandatory

This object presents the part number portion of the
ctPicTLPN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32).

OctetString

Constraints:
range: 7-7

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.17

sfcsANIMPicTLSerialNumb mandatory

This object presents the serial number portion of the
ctPicTLSN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 3…

OctetString

Constraints:
range: 4-4

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.18

sfcsANIMPicTLReworkLocation mandatory

The 2 character code that defines the location this
module was last reworked. This object contains the same
information as presented in ctPicTLPN object however
in a more human readable format. If non-existent, this
ob…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.19

sfcsANIMPicTLMfgLocation mandatory

The two character code that defines the location
this module was manufactured at. This object contains the same
information as presented in ctPicTLSN object however
in a more human readable format. If non-existent, thi…

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.20

sfcsANIMPicTLDateCode mandatory

The 3 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicTLSN
object however in a more human readable format. If
non-ex…

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.21

sfcsANIMPicTLRevisionCode mandatory

The 3 character top level revision code field of this module.
This object contains the same information as presented in
ctPicTLSN object however in a more human readable format.
If non-existent, this object will be set …

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.22

sfcsANIMPicTLPcbRevision mandatory

Defines the Cabletron revision of the art work for this
module. If non-existent, this object will be set to all
blanks(ascii 32).

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.23

sfcsANIMPicMacAddr mandatory

The base MAC address(ethernet format)assigned to the module.
If this field is not used then it should have a value of a
zero length string. If non-existent, this object will be set
to all blanks(ascii 32).

OctetString

Constraints:
range: 0-6

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.24

sfcsANIMPicNumbRsvdAddrs mandatory

The number of reserved MAC addresses starting at the
address as defined in ctPicMacAddr. If no MAC addresses
are reserved this object should have a value of 0.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.25

sfcsANIMPicBoardLevelRevision mandatory

Defines the Cabletron board level revision level code for
this module. If non-existent, this object will be set to
blanks (ascii 32).

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.26

sfcsANIMPicModuleTypeString mandatory

Describes the module associated with this PIC in a
human readable format. If non-existent, this object
will be set to blanks (ascii 32).

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.27

sfcsANIMPicDcDcConverterType mandatory

Describes the voltage of the installed DCDC Converter
input and output lines.
If the Module does not contain a DCDC Converter
this object will be set to blanks (ascii 32).

OctetString

Constraints:
range: 12-12

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.28

sfcsANIMPicDcDcConverterInputPower mandatory

Describes the maximum allowed input power
for the DCDC input line.
If the Module does not contain a DCDC Converter
this object will be set to blanks (ascii 32).

OctetString

Constraints:
range: 3-3

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.29

sfcsANIMPicSmb1PromVersion mandatory

Describes the current version of the SMB1 prom.
If the Module does not contain an SMB1 prom
this object will be set to blanks (ascii 32).

OctetString

Constraints:
range: 8-8

.1.3.6.1.4.1.52.4.1.2.11.1.1.3.3.1.1.30

sfcsInterfaceConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1 · 1 row entry · 6 columns

Open in standard view

This table contains the configuration information of each
configured SFCS switch interface.  If SFCS is not configured
on a port, than an entry will not exist.

sfcsInterfaceConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1

Each entry specifies the SFCS configuration for the SFCS
switch interface for which the entry exists.

Indexes

sfcsInterfaceConfigInterfaceIndex

Column Syntax OID

sfcsInterfaceConfigInterfaceIndex mandatory

The index which specifies which interface we are
dealing with.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.1

sfcsInterfaceConfigType obsolete

Sets the type of interface access attribute for the SFCS
interfaces. Access ports allow single user or shared
access and perform statisics and control; network ports
are equivalent to trunk ports with no access control…

Enumeration

Enumerated Values:

1	other
2	access-port
3	network-port
4	host-mgmt-port
5	host-ctl-port

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.2

sfcsInterfacePeakBufferUseage mandatory

An accumulated snap shot of the current peak queue depth
for the configured buffer queues. This information is
obtained from a read/reset register.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.3

sfcsInterfaceConfigNumberOfQueues mandatory

Indicates the number of priority queues configured on this
interface.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.4

sfcsInterfaceConfigSigStackID mandatory

Indicates the user signalling stack ID for this interface.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.5

sfcsInterfaceConfigClockingSource mandatory

The interface clocking source.

Enumerationr/w

Enumerated Values:

1	local-anim-clock
2	mother-board-master-clock

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.1.1.1.6

sfcsInterfaceStatsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1 · 1 row entry · 7 columns

Open in standard view

This table contains the cell counts for each
SFCS switch interface.

sfcsInterfaceStatsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1

Specifies the SFCS cell counts for the SFCS
interface for which this entry exists.

Indexes

sfcsInterfaceStatsInterfaceIndex

Column	Syntax	OID
sfcsInterfaceStatsInterfaceIndex mandatory The index which specifies which interface we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.1`
sfcsInterfaceStatsRxErrors mandatory Indicates the number of receive path lookup invalid and out of range errors.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.2`
sfcsInterfaceStatsVPILookupInvalidErrors mandatory Indicates the number of VPI lookup invalid and out of range errors.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.3`
sfcsInterfaceStatsRxCnxLookupInvalidErrors mandatory Indicates the number of receive connection lookup invalid errors.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.4`
sfcsInterfaceStatsRxCellCnt mandatory Indicates the number of receive cells on this interface.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.5`
sfcsInterfaceStatsTxCellCnt mandatory Indicates the number of transmit cells on this interface.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.6`
sfcsInterfaceStatsOverflowDropCellCnt mandatory Indicates the number of cells that were dropped due to queue overflows.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.4.2.1.1.7`

sfcsQueueConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1 · 1 row entry · 9 columns

Open in standard view

This table contains the configuration information for
all queues on the SFCS.

sfcsQueueConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsQueueConfigInterfaceIndex sfcsQueueConfigQueueIndex

Column	Syntax	OID
sfcsQueueConfigInterfaceIndex mandatory The index which specifies which interface we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.1`
sfcsQueueConfigQueueIndex mandatory The index which specifies which transmit queue we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.2`
sfcsQueueConfigQueueSize mandatory Indicates the size of the transmit queue for this queue instance.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.3`
sfcsQueueConfigQueueBandwidth mandatory Indicates the percentage of this interface's bandwidth utilized by this particular queue.	Integer32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.4`
sfcsQueueConfigClpDropThreshold mandatory Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.5`
sfcsQueueConfigCongestionThreshold mandatory Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.6`
sfcsQueueConfigEFCILowThreshold mandatory Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.7`
sfcsQueueConfigRMThreshold mandatory Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.8`
sfcsQueueConfigEPDThreshold mandatory Indicates the Early Packet Discard threshold expressed as a percentage of the queue's size. When this level is exceeded the Transmit ASIC starts to drop all cells entering this queue.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.1.1.1.9`

sfcsQueueStatsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1 · 1 row entry · 6 columns

Open in standard view

This table contains the statistics information for all
queues on the SFCS.

sfcsQueueStatsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsQueueStatsInterfaceIndex sfcsQueueStatsQueue

Column	Syntax	OID
sfcsQueueStatsInterfaceIndex mandatory The index which specifies which interface we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.1`
sfcsQueueStatsQueue mandatory The index which specifies which queue we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.2`
sfcsQueueStatsTxClpCellsDiscarded mandatory Indicates the number of cells with CLP=1 that were discarded for this queue instance.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.3`
sfcsQueueStatsTxCellsDropped mandatory Indicates the number of cells that overflowed the buffer for this queue instance.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.4`
sfcsQueueStatsQueuePeakLevel mandatory Indicates the peak level since last read for this queue instance.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.5`
sfcsQueueStatsTxCellCnt mandatory Indicates the transmit cell count on a per queue basis. A value of zero indicates not available	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.5.2.1.1.6`

sfcsCnxCfgTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1 · 1 row entry · 13 columns

Open in standard view

This table contains the connection configuration
information.

sfcsCnxCfgEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1

Each entry specifies the connection configuration
information for the SFCS switch connection instance.

Indexes

sfcsCnxCfgCrossConnectIndex sfcsCnxCfgCrossConnectLowIfIndex sfcsCnxCfgCrossConnectLowVpi sfcsCnxCfgCrossConnectLowVci sfcsCnxCfgCrossConnectHighIfIndex sfcsCnxCfgCrossConnectHighVpi sfcsCnxCfgCrossConnectHighVci

Column Syntax OID

sfcsCnxCfgCrossConnectIndex mandatory

A unique value to identify this cross-connect.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.1

sfcsCnxCfgCrossConnectLowIfIndex mandatory

The value of this object is equal to the low
MIB II IfIndex value of the ATM interface port
for this cross-connect.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.2

sfcsCnxCfgCrossConnectLowVpi mandatory

The value of this object is equal to the low VPI
value at the ATM interface associated with the
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.3

sfcsCnxCfgCrossConnectLowVci mandatory

The value of this object is equal to the low VCI
value at the ATM interface associated with this
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.4

sfcsCnxCfgCrossConnectHighIfIndex mandatory

The value of this object is equal to the high
MIB II IfIndex value of the ATM interface port
for this cross-connect.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.5

sfcsCnxCfgCrossConnectHighVpi mandatory

The value of this object is equal to the high VPI
value at the ATM interface associated with the
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.

Integer32

Constraints:
range: 0-4095

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.6

sfcsCnxCfgCrossConnectHighVci mandatory

The value of this object is equal to the high VCI
value at the ATM interface associated with this
cross-connect that is identified by
sfcsCnxCfgCrossConnectIndex.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.7

sfcsCnxCfgType mandatory

Indicates the connection type for this VC.
point-to-point-vpl(1)
point-to-mpoint-vpl(2)
mpoint-to-mpoint-vpl(3)
point-to-point-vcl(4)
point-to-mpoint-vcl(5)
mpoint-to-mpoint-vcl(6)

Enumeration

Enumerated Values:

1	point-to-point-vpl
2	point-to-mpoint-vpl
3	mpoint-to-mpoint-vpl
4	point-to-point-vcl
5	point-to-mpoint-vcl
6	mpoint-to-mpoint-vcl

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.8

sfcsCnxCfgTmType mandatory

Indicates the type of traffic management used on this VC.
other (1)
efci (2)
er (3)

Enumeration

Enumerated Values:

1	other
2	efci
3	er

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.9

sfcsCnxCfgUPCEnable mandatory

Indicates whether or not UPC policing is enabled on
this VC. A VC can be bi-directional or uni-directional.
Due to this, the UPC bit is a masking based on directionality.
Where direction is in terms of high interface (H…

Enumeration

Enumerated Values:

1	l-h-upc-enabled
2	l-h-tag-enabled
3	l-h-upc-tag-enabled
4	h-l-upc-enabled
5	l-h-upc-and-h-l-upc-enabled
6	l-h-Tag-and-h-l-upc-enabled
7	l-h-upc-tag-and-h-l-upc-enabled
8	h-l-tag-enabled
9	l-h-upc-and-h-l-tag-enabled
10	l-h-tag-and-h-l-tag-enabled
11	l-h-upc-tag-and-h-l-tag-enabled
12	h-l-upc-tag-enabled
13	l-h-upc-and-h-l-upc-tag-enabled
14	l-h-tag-and-h-l-upc-tag-enabled
15	l-h-upc-tag-and-h-l-upc-tag-enabled

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.10

sfcsCnxCfgStatsEnable mandatory

Indicates whether statistics will be kept on this VC.
enabled(1)
disabled(2)
other(3)

Enumeration

Enumerated Values:

1	enabled
2	disabled
3	other

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.11

sfcsCnxCfgStatsTableCounterSizes mandatory

Indicates the size of the drop counter for this VC.
thirtytwobittagcounter (1)
thirtytwobitdropcounter (2)
sixteenbiteachcounter (3)

Enumeration

Enumerated Values:

1	thirtytwobittagcounter
2	thirtytwobitdropcounter
3	sixteenbiteachcounter

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.12

sfcsCnxCfgOwner mandatory

Indicates the owner of this cross connect.
other(1)
own(2)
dontown(3)

Enumeration

Enumerated Values:

1	other
2	own
3	dontown

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.1.1.1.13

sfcsCnxStatsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1 · 1 row entry · 13 columns

Open in standard view

This table contains the connection configuration
information.

sfcsCnxStatsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1

Each entry specifies the connection statistics
information for the SFCS switch connection instance.

Indexes

sfcsCnxStatsCrossConnectIndex sfcsCnxStatsCrossConnectLowIfIndex sfcsCnxStatsCrossConnectLowVpi sfcsCnxStatsCrossConnectLowVci sfcsCnxStatsCrossConnectHighIfIndex sfcsCnxStatsCrossConnectHighVpi sfcsCnxStatsCrossConnectHighVci

Column	Syntax	OID
sfcsCnxStatsCrossConnectIndex mandatory A unique value to identify this cross-connect.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.1`
sfcsCnxStatsCrossConnectLowIfIndex mandatory The value of this object is equal to the low MIB II IfIndex value of the ATM interface port for this cross-connect.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.2`
sfcsCnxStatsCrossConnectLowVpi mandatory The value of this object is equal to the low VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: `range: 0-4095`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.3`
sfcsCnxStatsCrossConnectLowVci mandatory The value of this object is equal to the low VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.4`
sfcsCnxStatsCrossConnectHighIfIndex mandatory The value of this object is equal to the high MIB II IfIndex value of the ATM interface port for this cross-connect.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.5`
sfcsCnxStatsCrossConnectHighVpi mandatory The value of this object is equal to the high VPI value at the ATM interface associated with the cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: `range: 0-4095`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.6`
sfcsCnxStatsCrossConnectHighVci mandatory The value of this object is equal to the high VCI value at the ATM interface associated with this cross-connect that is identified by sfcsCnxStatsCrossConnectIndex.	Integer32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.7`
sfcsCnxStatsLoToHiHTxCells mandatory Indicates the transmitted cell count for this connection. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.8`
sfcsCnxStatsLoToHiDroppedCells mandatory Indicates the dropped cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.9`
sfcsCnxStatsLoToHiTaggedCells mandatory Indicates the tagged cell count for this connection instance. This entry specifies the count from the low port/vpi/vci to the high port/vpi/vci.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.10`
sfcsCnxStatsHiToLoHTxCells mandatory Indicates the transmitted cell count for this connection. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.11`
sfcsCnxStatsHiToLoDroppedCells mandatory Indicates the dropped cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.12`
sfcsCnxStatsHiToLoTaggedCells mandatory Indicates the tagged cell count for this connection instance. This entry specifies the count from the high port/vpi/vci to the low port/vpi/vci.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.7.2.1.1.13`

sfcsCnxErrorTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1 · 1 row entry · 3 columns

Open in standard view

This table contains the connection error information
supplied by the atmAPI mib.

sfcsCnxErrorEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1

A list of VCC connection request failures. This table
is indexed the same way as the atmVcCrossConnectTable
in the AToM mib.

Indexes

ATM-MIBatmVcCrossConnectIndex ATM-MIBatmVcCrossConnectLowIfIndex ATM-MIBatmVcCrossConnectLowVpi ATM-MIBatmVcCrossConnectLowVci ATM-MIBatmVcCrossConnectHighIfIndex ATM-MIBatmVcCrossConnectHighVpi ATM-MIBatmVcCrossConnectHighVci

Column Syntax OID

sfcsCnxErrorCode mandatory

Specifies the error reason for failure of the
connection setup.

01 fatal_error
02 moe_table_out_of_range
03 moe_mem_not_allocated
04 mem_fetch_double_reqst
05 lo_port_invalid
06 lo_port_loc…

OctetString

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.1

sfcsCnxErrorTimeStamp mandatory

Indicates the value of the sysUpTime when this
connection request failed. We will support this
field only if the element management uses this
table.

RFC1155-SMITimeTicks

Textual Convention: RFC1155-SMITimeTicks Unsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.2

sfcsCnxErrorRowStatus mandatory

The administrative control of this entry. The owner
could delete this entry after reading it, to prevent
this table from growing too big.
other (1)
inactive (2)
active (3)
delete (4)

Enumerationr/w

Enumerated Values:

1	other
2	inactive
3	active
4	delete

.1.3.6.1.4.1.52.4.1.2.11.1.1.7.3.1.1.3

sfcsCTMInterfaceConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1 · 1 row entry · 8 columns

Open in standard view

This table contains the configuration information of each
configured SHEMP interface.  If SFCS is not configured
on a port, than an entry will not exist.

sfcsCTMInterfaceConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1

Each entry specifies the SFCS configuration for the SFCS
switch interface for which the entry exists.

Indexes

sfcsCTMInterfaceConfigInterfaceIndex

Column Syntax OID

sfcsCTMInterfaceConfigInterfaceIndex mandatory

The index which specifies which interface we are
dealing with.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.1

sfcsCTMInterfaceConfigType mandatory

Enumeration

Enumerated Values:

1	other
2	access-port
3	network-port
4	host-mgmt-port
5	host-ctl-port

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.2

sfcsCTMInterfacePeakBufferUseage mandatory

Indicates the number of cells in transmit buffer memory.

Integer32

Constraints:
range: 0-100

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.3

sfcsCTMInterfaceConfigNumberOfQueues mandatory

Indicates the number of priority queues configured on this
interface.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.4

sfcsCTMInterfaceConfigSigStackID mandatory

Indicates the user signalling stack ID for this interface.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.5

sfcsCTMInterfaceConfigClocking mandatory

The anim clocking source.
one - use the generated-transmit-clock
two - use the channel-recovered-clock
three - use the system-master-clock
four - option not supported by this interface

Enumerationr/w

Enumerated Values:

1	generated-transmit-clock
2	channel-recovered-clock
3	system-master-clock
4	not-supported

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.6

sfcsCTMInterfaceConfigNextVPI mandatory

Indicates the next vpi for this interface.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.7

sfcsCTMInterfaceConfigNextVCI mandatory

Indicates the next vci for this interface.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.1.1.1.8

sfcsCTMInterfaceStatsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1 · 1 row entry · 7 columns

Open in standard view

This table contains the cell counts for each
SFCS switch interface.

sfcsCTMInterfaceStatsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1

Specifies the SFCS cell counts for the SFCS
interface for which this entry exists.

Indexes

sfcsCTMInterfaceStatsInterfaceIndex

Column	Syntax	OID
sfcsCTMInterfaceStatsInterfaceIndex mandatory The index which specifies which interface we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.1`
sfcsCTMInterfaceStatsRxErrors mandatory Indicates the number of receive path lookup invalid and out of range errors.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.2`
sfcsCTMInterfaceStatsVPILookupInvalidErrors mandatory Indicates the number of VPI lookup invalid and out of range errors.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.3`
sfcsCTMInterfaceStatsRxCnxLookupInvalidErrors mandatory Indicates the number of receive connection lookup invalid errors.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.4`
sfcsCTMInterfaceStatsRxCellCnt mandatory Indicates the number of receive cells on this interface.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.7`
sfcsCTMInterfaceStatsTxCellCnt mandatory Indicates the number of transmit cells on this interface.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.8`
sfcsCTMInterfaceStatsOverflowDropCellCnt mandatory Indicates the number of cells that were dropped due to queue overflows.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.2.1.1.9`

sfcsCTMQueueConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1 · 1 row entry · 8 columns

Open in standard view

This table contains the configuration information for
all queues on the SFCS.

sfcsCTMQueueConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsCTMQueueConfigInterfaceIndex sfcsQueueConfigQueueIndex

Column	Syntax	OID
sfcsCTMQueueConfigInterfaceIndex mandatory The index which specifies which interface we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.1`
sfcsCTMQueueConfigQueueIndex mandatory The index which specifies which transmit queue we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.2`
sfcsCTMQueueConfigQueueSize mandatory Indicates the size of the transmit queue for this queue instance.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.3`
sfcsCTMQueueConfigQueueBandwidth mandatory Indicates the percentage of this interface's bandwidth utilized by this particular queue.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.4`
sfcsCTMQueueConfigClpDropThreshold mandatory Indicates the queue level to start dropping CLP=1 cells for this queue. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.5`
sfcsCTMQueueConfigCongestionThreshold mandatory Indicates the level to consider this queue congested. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.6`
sfcsCTMQueueConfigEFCILowThreshold mandatory Indicates the lower threshold used for EFCI for this queue instance. This level is expressed as the percentage of this queue's size.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.7`
sfcsCTMQueueConfigRMThreshold mandatory Indicates the remote management queue threshold expressed as a percentage of the queue's size. When this level is hit, a management message is sent to the sender notifying it to slow down.	Integer32r/w Constraints: `range: 0-100`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.3.1.1.8`

sfcsCTMQueueStatsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1 · 1 row entry · 6 columns

Open in standard view

This table contains the statistics information for all
queues on the SFCS.

sfcsCTMQueueStatsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1

Each entry specifies the queue information for the
SFCS switch for which the entry exists.

Indexes

sfcsCTMQueueStatsInterfaceIndex sfcsQueueStatsQueue

Column	Syntax	OID
sfcsCTMQueueStatsInterfaceIndex mandatory The index which specifies which interface we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.1`
sfcsCTMQueueStatsQueue mandatory The index which specifies which queue we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.2`
sfcsCTMQueueStatsTxClpCellsDiscarded mandatory Indicates the number of cells with CLP=1 that were discarded for this queue instance.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.3`
sfcsCTMQueueStatsTxCellsDropped mandatory Indicates the number of cells that overflowed the buffer for this queue instance.	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.4`
sfcsCTMQueueStatsQueuePeakLevel mandatory Indicates the peak level since last read for this queue instance.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.5`
sfcsCTMQueueStatsTxCellCnt mandatory Indicates the transmit cell count on a per queue basis. A value of zero indicates not available	OctetString	`.1.3.6.1.4.1.52.4.1.2.11.1.1.9.4.1.1.6`

sfcsBwNimsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1 · 1 row entry · 5 columns

Open in standard view

This table contains the Nim Oid and the Nim Administrative Status
reading functions.

sfcsBwNimsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1

Each entry contains a Nim Oid and the Nim Administrative Status.

Indexes

sfcsBwNimsIndex

Column	Syntax	OID
sfcsBwNimsIndex mandatory This index specifies which NIM we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.1`
sfcsBwNimsAdminStatus mandatory Indicates the administrative status of this Nim. 10 - Active 20 - Inactive	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.2`
sfcsBWNimsBuffCount mandatory The number of transmit buffers for this NIM	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.3`
sfcsBWNimsPortCount mandatory The number of ports for this NIM	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.4`
sfcsBWNimsPrioCount mandatory The number of priority queues for this NIM	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.1.1.1.5`

sfcsBwPortsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1 · 1 row entry · 6 columns

Open in standard view

This table contains the Port Oid, Port Administrative Status and
the forward/reverse physical bandwidth reading functions.

sfcsBwPortsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1

Each entry contains the Port Oid, Port Administrative Status and
the forward/reverse physical bandwidth.

Indexes

sfcsBwPortsIndex

Column	Syntax	OID
sfcsBwPortsIndex mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.1`
sfcsBwPortsAdminStatus mandatory Indicates the administrative status of this Port. 10 - Active 20 - Inactive	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.2`
sfcsBwPortsPhysBwFwd mandatory This is the forward physical bandwidth of the port in cells/sec.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.3`
sfcsBwPortsPhysBwRev mandatory This is the reverse physical bandwidth of the port in cells/sec.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.4`
sfcsBwPortsZone mandatory The range of the current bw operational point for this port. If a value has never been set the value will be -1.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.5`
sfcsBwPortsMetric mandatory The current bw operational point for this port. If a value has never been set the value will be -1.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.2.1.1.6`

sfcsBwPortPoolLimitsTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1 · 1 row entry · 16 columns

Open in standard view

This table contains

sfcsBwPortPoolLimitsEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1

Each entry contains

Indexes

sfcsBwPortPoolLimitsIndex sfcsBwPortPoolLimitsPoolIndex

Column	Syntax	OID
sfcsBwPortPoolLimitsIndex mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.1`
sfcsBwPortPoolLimitsPoolIndex mandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.2`
sfcsBwPortPoolLimitsMaxAllocBwFwd mandatory Upper Limit for BW to be allocated forward direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.3`
sfcsBwPortPoolLimitsMaxAllocBwRev mandatory Upper Limit for BW to be allocated reverse direction. It is defaulted to the physical BW and is set by administrative action. Can't be set to a value greater than physical BW	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.4`
sfcsBwPortPoolLimitsBwAllocStrat mandatory Determines which of 3 sets of formulas will be used for computing the amount of variable bandwidth to be allocated. Conservative allocates the full amount of variable bandwidth, Moderate allocates approximately half of…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.5`
sfcsBwPortPoolLimitsBwConstant mandatory A ratio used in formulas for computing the amount of variable bandwidth to be allocated. Valid values are 1-255 which is the numerator of a fraction whose fixed denominator is 256. Thus the value 255 is really 255/256 …	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.6`
sfcsBwPortPoolLimitsCBRLimitFwd mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.7`
sfcsBwPortPoolLimitsCBRLimitRev mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to CBR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.8`
sfcsBwPortPoolLimitsABRLimitFwd mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.9`
sfcsBwPortPoolLimitsABRLimitRev mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to ABR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.10`
sfcsBwPortPoolLimitsVBRLimitFwd mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.11`
sfcsBwPortPoolLimitsVBRLimitRev mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to VBR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.12`
sfcsBwPortPoolLimitsUBRLimitFwd mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.13`
sfcsBwPortPoolLimitsUBRLimitRev mandatory A ratio used in allocating the allocatable bandwidth among the various Service classes. This value is the amount of the overall allocatable bw that can be allocated to UBR. The values are 1-255. For a more detailed des…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.14`
sfcsBwPortPoolLimitsUBRConnLimitFwd mandatory A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value w…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.15`
sfcsBwPortPoolLimitsUBRConnLimitRev mandatory A Limit to the number of UBR connections which can be established through this port. The limit applies to both user connections and management connections. The default is no limit. (If it has never been set, the value …	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.1.1.16`

sfcsBwPortPoolStatTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2 · 1 row entry · 56 columns

Open in standard view

This table contains

sfcsBwPortPoolStatEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1

Each entry contains

Indexes

sfcsBwPortPoolStatsIndex sfcsBwPortPoolStatsPoolIndex

Column	Syntax	OID
sfcsBwPortPoolStatsIndex mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.1`
sfcsBwPortPoolStatsPoolIndex mandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.2`
sfcsBwPortPoolStatConnCntFwd mandatory The current total number of calls in the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.3`
sfcsBwPortPoolStatConnCntRev mandatory The current total number of calls in the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.4`
sfcsBwPortPoolStatAllocBwFwd mandatory The current amount of allocated Bw in the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.5`
sfcsBwPortPoolStatAllocBwRev mandatory The current amount of allocated Bw in the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.6`
sfcsBwPortPoolStatAvailBwFwd mandatory The current amount of available Bw in the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.7`
sfcsBwPortPoolStatAvailBwRev mandatory The current amount of available Bw in the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.8`
sfcsBwPortPoolStatPeakBwFwd mandatory The peak amount of allocated Bw in the forward direction since the port was initialized OR the switch was reset.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.9`
sfcsBwPortPoolStatPeakBwRev mandatory The peak amount of allocated Bw in the reverse direction since the port was initialized OR the switch was reset.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.10`
sfcsBwPortPoolStatRejConnFwd mandatory The number of connections which were rejected because of insufficient forward bandwidth since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.11`
sfcsBwPortPoolStatRejConnRev mandatory The number of connections which were rejected because of insufficient reverse bandwidth since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.12`
sfcsBwPortPoolStatPrevAdverMAXCRFwd mandatory The amount of physical forward BW reported to PNNI in the latest reporting period.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.13`
sfcsBwPortPoolStatPrevAdverMAXCRRev mandatory The amount of physical reverse BW reported to PNNI in the latest reporting period.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.14`
sfcsBwPortPoolStatPrevAdverAvailCRFwd mandatory The amount of avail forward BW reported to PNNI in the latest reporting period.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.15`
sfcsBwPortPoolStatPrevAdverAvailCRRev mandatory The amount of avail reverse BW reported to PNNI in the latest reporting period.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.16`
sfcsBwPortPoolStatCBRConnCntFwd mandatory The number of currently established CBR connections for the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.17`
sfcsBwPortPoolStatCBRConnCntRev mandatory The number of currently established CBR connections for the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.18`
sfcsBwPortPoolStatCBRConnRejFwd mandatory The number of CBR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.19`
sfcsBwPortPoolStatCBRConnRejRev mandatory The number of CBR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.20`
sfcsBwPortPoolStatCBRAllocBwFwd mandatory The amount of forward allocated Bw that is CBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.21`
sfcsBwPortPoolStatCBRAllocBwRev mandatory The amount of reverse allocated Bw that is CBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.22`
sfcsBwPortPoolStatCBRAggPCRFwd mandatory The aggregated forward PCR for all established CBR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.23`
sfcsBwPortPoolStatCBRAggPCRRev mandatory The aggregated reverse PCR for all established CBR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.24`
sfcsBwPortPoolStatCBRPrevAdverMAXCTD mandatory The maxCTD for the forward direction reported to PNNI for the last update period for CBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.25`
sfcsBwPortPoolStatCBRPrevAdverCDV mandatory The CDV for the forward direction reported to PNNI for the last update period for CBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.26`
sfcsBwPortPoolStatABRConnCntFwd mandatory The number of currently established ABR connections for the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.27`
sfcsBwPortPoolStatABRConnCntRev mandatory The number of currently established ABR connections for the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.28`
sfcsBwPortPoolStatABRConnRejFwd mandatory The number of ABR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.29`
sfcsBwPortPoolStatABRConnRejRev mandatory The number of ABR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.30`
sfcsBwPortPoolStatABRAllocBwFwd mandatory The amount of forward allocated Bw that is ABR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.31`
sfcsBwPortPoolStatABRAllocBwRev mandatory The amount of reverse allocated Bw that is ABR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.32`
sfcsBwPortPoolStatABRAggPCRFwd mandatory The aggregated forward PCR for all established ABR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.33`
sfcsBwPortPoolStatABRAggPCRRev mandatory The aggregated reverse PCR for all established ABR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.34`
sfcsBwPortPoolStatABRPrevAdverMAXCTD mandatory The maxCTD for the forward direction reported to PNNI for the last update period for ABR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.35`
sfcsBwPortPoolStatABRPrevAdverCDV mandatory The CDV for the forward direction reported to PNNI for the last update period for ABR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.36`
sfcsBwPortPoolStatVBRConnCntFwd mandatory The number of currently established VBR connections for the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.37`
sfcsBwPortPoolStatVBRConnCntRev mandatory The number of currently established VBR connections for the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.38`
sfcsBwPortPoolStatVBRConnRejFwd mandatory The number of VBR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.39`
sfcsBwPortPoolStatVBRConnRejRev mandatory The number of VBR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.40`
sfcsBwPortPoolStatVBRAllocBwFwd mandatory The amount of forward allocated Bw that is VBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.41`
sfcsBwPortPoolStatVBRAllocBwRev mandatory The amount of reverse allocated Bw that is VBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.42`
sfcsBwPortPoolStatVBRAggPCRFwd mandatory The aggregated forward PCR for all established VBR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.43`
sfcsBwPortPoolStatVBRAggPCRRev mandatory The aggregated reverse PCR for all established VBR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.44`
sfcsBwPortPoolStatVBRPrevAdverMAXCTD mandatory The maxCTD for the forward direction reported to PNNI for the last update period for VBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.45`
sfcsBwPortPoolStatVBRPrevAdverCDV mandatory The CDV for the forward direction reported to PNNI for the last update period for VBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.46`
sfcsBwPortPoolStatUBRConnCntFwd mandatory The number of currently established UBR connections for the forward direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.47`
sfcsBwPortPoolStatUBRConnCntRev mandatory The number of currently established UBR connections for the reverse direction.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.48`
sfcsBwPortPoolStatUBRConnRejFwd mandatory The number of UBR forward connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.49`
sfcsBwPortPoolStatUBRConnRejRev mandatory The number of UBR reverse connections rejected since the port was initialized or the switch was reset last.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.50`
sfcsBwPortPoolStatUBRAllocBwFwd mandatory The amount of forward allocated Bw that is UBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.51`
sfcsBwPortPoolStatUBRAllocBwRev mandatory The amount of reverse allocated Bw that is UBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.52`
sfcsBwPortPoolStatUBRAggPCRFwd mandatory The aggregated forward PCR for all established UBR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.53`
sfcsBwPortPoolStatUBRAggPCRRev mandatory The aggregated reverse PCR for all established UBR connections.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.54`
sfcsBwPortPoolStatUBRPrevAdverMAXCTD mandatory The maxCTD for the forward direction reported to PNNI for the last update period for UBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.55`
sfcsBwPortPoolStatUBRPrevAdverCDV mandatory The CDV for the forward direction reported to PNNI for the last update period for UBR service class.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.2.1.56`

sfcsBwPortPoolTrapMgmtTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3 · 1 row entry · 44 columns

Open in standard view

This table contains

sfcsBwPortPoolTrapMgmtEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1

Each entry contains

Indexes

sfcsBwPortPoolTrapMgmtIndex sfcsBwPortPoolTrapMgmtPoolIndex

Column	Syntax	OID
sfcsBwPortPoolTrapMgmtIndex mandatory This index specifies which Port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.1`
sfcsBwPortPoolTrapMgmtPoolIndex mandatory This index specifies which Pool within Port we are dealing with. This reference is in the same format as MIB II's Interface index. (If it has never been set, the value will be -1.)	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.2`
sfcsBwPortPoolTrapMgmtAllocBwTholdHiFwd mandatory The upper threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.3`
sfcsBwPortPoolTrapMgmtAllocBwTholdHiRev mandatory The upper threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.4`
sfcsBwPortPoolTrapMgmtAllocBwTholdLoFwd mandatory The lower threshold for the Alloc BW fwd trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.5`
sfcsBwPortPoolTrapMgmtAllocBwTholdLoRev mandatory The lower threshold for the Alloc BW rev trap. When an allocation causes the currently allocated bw be below this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.6`
sfcsBwPortPoolTrapMgmtPeakBwTholdFwd mandatory The upper threshold for the Peak BW fwd trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.7`
sfcsBwPortPoolTrapMgmtPeakBwTholdRev mandatory The upper threshold for the Peak BW rev trap. When an allocation causes the allocated BW to exceed this value the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.8`
sfcsBwPortPoolTrapMgmtHoldDownTime mandatory The time between traps of the same type. If a trap of a particular type is generated for a particular port, another of that type for that port will not be generated until the hold down time has expired. (If it has never…	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.9`
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiFwd mandatory The upper threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.10`
sfcsBwPortPoolTrapMgmtCBRConnCntTholdHiRev mandatory The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.11`
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoFwd mandatory The lower threshold for the CBR connection count Fwd trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.12`
sfcsBwPortPoolTrapMgmtCBRConnCntTholdLoRev mandatory The lower threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.13`
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiFwd mandatory The upper threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.14`
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdHiRev mandatory The upper threshold for the CBR connection count Rev trap. When an allocation causes the CBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.15`
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoFwd mandatory The lower threshold for the CBR Allocated Bw Fwd trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.16`
sfcsBwPortPoolTrapMgmtCBRAllocBwTholdLoRev mandatory The lower threshold for the CBR Allocated Bw Rev trap. When an allocation causes the CBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.17`
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiFwd mandatory The upper threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.18`
sfcsBwPortPoolTrapMgmtABRConnCntTholdHiRev mandatory The upper threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.19`
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoFwd mandatory The lower threshold for the ABR connection count Fwd trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.20`
sfcsBwPortPoolTrapMgmtABRConnCntTholdLoRev mandatory The lower threshold for the ABR connection count Rev trap. When an allocation causes the ABR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.21`
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiFwd mandatory The upper threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.22`
sfcsBwPortPoolTrapMgmtABRAllocBwTholdHiRev mandatory The upper threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.23`
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoFwd mandatory The lower threshold for the ABR Allocated Bw Fwd trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.24`
sfcsBwPortPoolTrapMgmtABRAllocBwTholdLoRev mandatory The lower threshold for the ABR Allocated Bw Rev trap. When an allocation causes the ABR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.25`
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiFwd mandatory The upper threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.26`
sfcsBwPortPoolTrapMgmtVBRConnCntTholdHiRev mandatory The upper threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.27`
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoFwd mandatory The lower threshold for the VBR connection count Fwd trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.28`
sfcsBwPortPoolTrapMgmtVBRConnCntTholdLoRev mandatory The lower threshold for the VBR connection count Rev trap. When an allocation causes the VBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.29`
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiFwd mandatory The upper threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.30`
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdHiRev mandatory The upper threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.31`
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoFwd mandatory The lower threshold for the VBR Allocated Bw Fwd trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.32`
sfcsBwPortPoolTrapMgmtVBRAllocBwTholdLoRev mandatory The lower threshold for the VBR Allocated Bw Rev trap. When an allocation causes the VBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.33`
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiFwd mandatory The upper threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.34`
sfcsBwPortPoolTrapMgmtUBRConnCntTholdHiRev mandatory The upper threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.35`
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoFwd mandatory The lower threshold for the UBR connection count Fwd trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.36`
sfcsBwPortPoolTrapMgmtUBRConnCntTholdLoRev mandatory The lower threshold for the UBR connection count Rev trap. When an allocation causes the UBR connection count to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.37`
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiFwd mandatory The upper threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.38`
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdHiRev mandatory The upper threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to exceed this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.39`
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoFwd mandatory The lower threshold for the UBR Allocated Bw Fwd trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.40`
sfcsBwPortPoolTrapMgmtUBRAllocBwTholdLoRev mandatory The lower threshold for the UBR Allocated Bw Rev trap. When an allocation causes the UBR Allocated Bw to fall below this value, the trap is generated. (If it has never been set, the value will be -1.)	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.41`
sfcsBWPortPoolTrapMgmtBuffUpThold mandatory The upper threshold for buffer allocation trap .	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.42`
sfcsBWPortPoolTrapMgmtBuffLoThold mandatory The lower threshold for buffer allocation trap .	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.43`
sfcsBWPortPoolTrapMgmtConnRejThold mandatory The lower threshold for conn rejects trap .	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.3.3.1.44`

sfcsBuffPrioTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1 · 1 row entry · 12 columns

Open in standard view

This table contains the rows of all the buffer pools.

sfcsBuffPrioEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1

Each entry contains the rows of all the buffer pools.

Indexes

sfcsBuffPrioPortIndex sfcsBuffPrioPriority

Column	Syntax	OID
sfcsBuffPrioPortIndex mandatory This index specifies which port we are dealing with. This reference is in the same format as MIB II's Interface index.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.1`
sfcsBuffPrioPriority mandatory This index specifies which priority we are dealing with.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.2`
sfcsBuffPrioAssignCtl mandatory The status of how assignment is controlled. Static,Manual,Adaptive.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.3`
sfcsBuffPrioMinCtl mandatory The minimum number of cells which can be assigned to this port/prioity.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.4`
sfcsBuffPrioAssigned mandatory The number of cells which are currently assigned to this port/priority.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.5`
sfcsBuffPrioAllocated mandatory The number of assigned cells which are currently allocated to VCs for this port/priority.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.6`
sfcsBuffPrioAvailable mandatory The number of assigned cells which are free to be allocated.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.7`
sfcsBuffPrioPeakAlloc mandatory The peak number of cells which have been allocated to this port/priority.	Integer32 Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.8`
sfcsBuffPrioConnRejs mandatory The number of connections rejected because of a lack of buffers.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.9`
sfcsBuffPrioUpTholdTrap mandatory The upper threshold of allocations to trigger an upper thold trap.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.10`
sfcsBuffPrioLoTholdTrap mandatory The lower threshold of allocations to trigger a lower thold trap.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.11`
sfcsBuffPrioConnRejThold mandatory The lower threshold of conn rejects trap because of inadequate buffers.	Integer32r/w Textual Convention: COPS-PR-SPPIInteger32 `Integer32` Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.52.4.1.2.11.1.1.12.4.1.1.12`

sfcsProxyConfigTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1 · 1 row entry · 15 columns

Open in standard view

This table contains the config info and a port
reading function.

sfcsProxyConfigEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1

Each entry contains ANIM Proxy config info or a function.

Indexes

sfcsProxyConfigANIMIndex

Column Syntax OID

sfcsProxyConfigANIMIndex mandatory

This index specifies which ANIM Proxy we are dealing
with. This reference is in the same format as MIB II's
Interface index.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.1

sfcsProxyConfigNUMPORTS mandatory

Indicates the number of ports per Proxy which is always 4.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.2

sfcsProxyConfigTxMemSize mandatory

Indicates the size of the port's Transmission memory in K.
The memory size is always 1K.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.3

sfcsProxyConfigRxMaxPduSize mandatory

Indicates the size of the port's Transmission memory in K.
The memory size is always 1K.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.4

sfcsProxyConfigBandWidth mandatory

Indicates the bandwidth for the port, which is ?????

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.5

sfcsProxyConfigTransmitDone mandatory

Checks if the Transmission has finished.

Enumeration

Enumerated Values:

1	yes
2	no

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.6

sfcsProxyConfigReceiveFifoState mandatory

Checks if the port's receive Fifo is full or not.

Enumeration

Enumerated Values:

1	full
2	not-full

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.7

sfcsProxyConfigPortTransmitMode mandatory

Controls Transmission of cells in port Transmit memory.

Enumerationr/w

Enumerated Values:

1	stop
2	start-stay
3	reread

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.8

sfcsProxyConfigReceiveFifoReset mandatory

Controls the receive buffer's memory. Reset clears memory.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.9

sfcsProxyConfigTxFifoReset mandatory

Controls the port's transmit memory. Reset clears memory.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.10

sfcsProxyConfigReceiveMode mandatory

Controls whether or not the port receives cells.

Enumerationr/w

Enumerated Values:

1	receiving
2	not-receiving

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.11

sfcsProxyConfigCaptureMode mandatory

Controls how much of the cell is received.

Enumerationr/w

Enumerated Values:

1	all
2	header

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.12

sfcsProxyConfigInitPort mandatory

Setting this returns the port to the initial setup.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.13

sfcsProxyConfigLoad mandatory

Transmit load for port.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.14

sfcsProxyConfigGumbo mandatory

Unreadable octet string used for control information.

OctetString

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.1.1.1.15

sfcsProxyTransTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1 · 1 row entry · 14 columns

Open in standard view

This table contains the arguments and the function for the
Transmit function.

sfcsProxyTransEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1

The entries are the arguments for the Transmit function.

Indexes

sfcsProxyTransANIMIndex

Column Syntax OID

sfcsProxyTransANIMIndex mandatory

This index specifies which ANIM Port we are dealing
with. This reference is in the same format as MIB II's
Interface Index.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.1

sfcsProxyTransEncodeNewPdu mandatory

Setting this encodes a new PDU based on the current PDU parameters
into the port's transmit memory.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.2

sfcsProxyTransVPI mandatory

This is the VPI for the PDU.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.3

sfcsProxyTransVCI mandatory

This is the VCI for the PDU.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.4

sfcsProxyTransPTI mandatory

Payload Type Indicator: the value of the 3 bit Payload Type
field in the header. The most signifigant bit indicates user or
control data, the next bit indicates congestion, and the
last bit indicates AAL encoding.

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.5

sfcsProxyTransCLP mandatory

The cell loss priority: 1 or 0.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.6

sfcsProxyTransPayloadType mandatory

The payload type for the cell.

Enumerationr/w

Enumerated Values:

1	user-input
2	sequential
3	uniform

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.7

sfcsProxyTransPayloadLength mandatory

The length of the payload in bytes.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.8

sfcsProxyTransPayloadData mandatory

If the payload type is user input, this is the payload itself.

OctetStringr/w

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.9

sfcsProxyTransCount mandatory

Number of copies of the pdu to encode in port transmit memory.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.10

sfcsProxyTransPayloadAdaptionLayer mandatory

The format of the payload: either raw cells or AAL5.

Enumerationr/w

Enumerated Values:

1	raw
2	aal5

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.11

sfcsProxyTransMpxMethod mandatory

The format of the payload: either raw cells or AAL5.

Integer32r/w

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.12

sfcsProxyTransControl mandatory

Controls how many times to send what's in the port's
transmit memory.

Enumerationr/w

Enumerated Values:

1	send-once
2	repeat

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.13

sfcsProxyTransGumbo mandatory

Returns the vpi, vci, pti, clp, payload_type, payload_length, count,
PAL, mpx method, and control entires for this table in a string where
the entries are separated by semicolons.

OctetString

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.2.1.1.14

sfcsProxyReadTable

table mandatory

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1 · 1 row entry · 20 columns

Open in standard view

This table contains information read from the cells in the receive fifo.

sfcsProxyReadEntry entry .1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1

The entries are the information about the cells or the PDU.

Indexes

sfcsProxyReadANIMIndex

Column Syntax OID

sfcsProxyReadANIMIndex mandatory

This index specifies which ANIM Port we are dealing
with. This reference is in the same format as the MIB II
Interface Index.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.1

sfcsProxyReadMode mandatory

How the receive fifo is read.

Enumerationr/w

Enumerated Values:

1	reassemble-PDU
2	cell-by-cell
3	all-data

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.2

sfcsProxyReadNewPdu mandatory

Pops a new Pdu from the receive fifo to be examined and read.

Enumerationr/w

Enumerated Values:

1	get-next-pdu
2	reread-from-beginning

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.3

sfcsProxyReadGumbo mandatory

Unreadable control information.

OctetStringr/w

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.4

sfcsProxyReadVPI mandatory

This is the VPI for the PDU.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.5

sfcsProxyReadVCI mandatory

This is the VCI for the PDU.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.6

sfcsProxyReadPTI mandatory

Integer32

Constraints:
range: 0-7

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.7

sfcsProxyReadCLP mandatory

The cell loss priority: 1 or 0.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.8

sfcsProxyReadDataLength mandatory

The length of the PDU in bytes.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.9

sfcsProxyReadData mandatory

The actual data of the PDU.

OctetString

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.10

sfcsProxyReadPal mandatory

The format of the payload: either raw cells or AAL5.

Enumeration

Enumerated Values:

1	raw
2	aal5

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.11

sfcsProxyReadInbyteslosts mandatory

The number of bytes that were dropped while reading. Usually because
they occurred before the Start of Cell was discovered.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.12

sfcsProxyReadInCells mandatory

The number of cells read since this port was last reset.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.13

sfcsProxyReadInError mandatory

The number of pdu's that had to be dropped due to errors.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.14

sfcsProxyReadInCellReadError mandatory

The number of cells that had to be dropped due to errors.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.15

sfcsProxyReadInHecError mandatory

The number of cell headers that contained errors.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.16

sfcsProxyReadInTooBigError mandatory

The number of pdu's that were too large to be received.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.17

sfcsProxyReadInCRCError mandatory

The number of pdu's that failed the CRC check.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.18

sfcsProxyReadInLengthMismatchError mandatory

The length stored in the pdu did not match the actual
length of the pdu read in.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.19

sfcsProxyReadInTotalCells mandatory

Total number of cells read in by the snapshot.

Integer32

Textual Convention: COPS-PR-SPPIInteger32 Integer32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.52.4.1.2.11.1.1.13.3.1.1.20