sfcsConfigSwitchCapacity
CTRON-SFCS-MIB ·
.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11
Object
column
mandatory
Integer32
Indicates the front panel bandwidth based on the hardware that is currently installed, in Mbps. (number of ports and the port type)
Context
- MIB
- CTRON-SFCS-MIB
- OID
.1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.11- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- sfcsConfigEntry
- Table
- sfcsConfigTable
- Siblings
- 19
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sfcsConfigSlotIndex mandatory The primary index to the SFCS switch table. This
identifies the chassis slot number for this switch
module. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.1 |
| sfcsConfigHostCtrlATMAddr mandatory Indicates the ATM address of the host. (SAR) | column | OctetString | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.10 |
| sfcsConfigMaxCnxEntries mandatory Indicates the maximum number of connections which
can be established on this switch module. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.12 |
| sfcsConfigMaxStatEntries mandatory Indicates the maximum number of stats enabled VCs for this
switch module. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.13 |
| sfcsConfigMaxUpcEntries mandatory Indicates the maximum number of UPC enabled VCs for this
switch module. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.14 |
| sfcsConfigNumberANIMS mandatory Indicates the number of ATM Network Inteface Modules
currently configured on this switch module. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.15 |
| sfcsConfigBwCapability mandatory Indicates the total bandwidth capability for this
switch engine expressed in Mbps. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.16 |
| sfcsConfigMasterClock1Source mandatory Indicates the clocking source for MasterClock1 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.17 |
| sfcsConfigMasterClock2Source mandatory Indicates the clocking source for MasterClock2 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.18 |
| sfcsConfigMasterClock1Standby mandatory Indicates the clocking stand-by for MasterClock1 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.19 |
| sfcsConfigAdminStatus mandatory Sets the administrative state of the SFCS switching
services for this SFCS module. This controls the
SFCS state at a module level. Regardless of the
per-interface state of each … | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.2 |
| sfcsConfigMasterClock2Standby mandatory Indicates the clocking stand-by for MasterClock2 on each board.
The write will fail if it is also currently the source of the
backplane. The write will also fail if the board does… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.20 |
| sfcsConfigAdminReset mandatory Resets this SFCS module. Writing a value of
reset(2) will force a soft restart of the SFCS
without any graceful shutdown. Any active
connections or services will be interrupted.
… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.3 |
| sfcsConfigOperStatus mandatory Indicates the current operating condition of the SFCS
module.
enabled(1) -- running
disabled(2) -- not running
other(3) -- n… | column | Enumeration | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.4 |
| sfcsConfigOperTime mandatory Indicates the amount of time (# of time ticks) that this
SFCS module has been in its current operational state. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.5 |
| sfcsConfigLastChange mandatory Indicates the last time a change was made to the
configuration entry for this SFCS switch module. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.6 |
| sfcsConfigVersion mandatory Indicates the current revision level of the SFCS MIB
for this switch module expressed as an integer. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.7 |
| sfcsConfigMibRev mandatory Indicates in textual format the current revision level
of the Cabletron SFCS MIB for this switch module. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.8 |
| sfcsConfigSwitchHostPort mandatory Indicates the switch port that is attached to the host. | column | Integer32 | .1.3.6.1.4.1.52.4.1.2.11.1.1.2.1.1.1.9 |